There is no XF86Config-4 file in /etc/X11 on my machine, only the XF86Config file. However, I believe this is the correct file, because the Xfree86.0.log file states that the elographics_drv.o file is getting loaded, it just doesn't work. That being said I copied my XF86Config file to XF86Config-4 and rebooted, but it still doesn't work. The log file now says its using the Config-4 file, but I still get the same error.
Scott =================================== Scott Wentzel Rite Solutions 1272 West Main Rd, Middletown, RI, 02842 [EMAIL PROTECTED] www.rite-solutions.com (401) 847-3399 x26 (office) (401) 847-8833 (fax) =================================== -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of rkalaskar Sent: Thursday, December 26, 2002 12:36 PM To: [EMAIL PROTECTED] Subject: Re: [Newbie]Problem configuring Elo Touchscreen XFree86 4.2 uses the config file /etc/X11/XF86Config-4 not /etc/X11/XF86Config. Did you add the changes to the righ file? I have a similar setup. It works fine Rahul Scott Wentzel wrote: >I am using XFree86 4.2 under Suse Linux 8.0 with a linux kernel of 2.4.18. >I have an Elo Touchscreen. I have followed the EloTouch installation >instructions in setting up the /etc/X11/XF86Config file manually, and I have >also ran the SaX2 program to setup that config file automatically, but I >still cannot get the EloTouch screen to work. The XF86Config file looks >like something like this, although I have tried many variations in my >attempts: > > Added to "ServerLayout" section > 'Inputdevice "touchscreen1" >"SendCoreEvents"' > Added an "InputDevice" section > 'Section "InputDevice" > Identifier "touchscreen1" > Driver "elographics" > Option "Device" "/dev/ttyS2" > Option "AlwaysCore" > Option "screenno" "0" > Option "MinX" "600" > Option "MaxX" "3600" > Option "MinY" "600" > Option "MaxY" "3600" > Option "UntouchDelay" "3" > Option "ReportDelay" "1" > EndSection' > >Then I restart the X Server by logging out, and I have also tried rebooting, >but It still doesn't work. I also noticed I get an error message in the >/var/log/Xfree86.0.log file. I dont know if its related or not, but the >error is: > Not at the specified rate or model 2310, will continue > Unable to ask Elographics touchscreen identification > > > >Is there anyone who might be able to help me figure out what I'm missing ? > >Thanks... > >=================================== >Scott Wentzel >Rite Solutions >1272 West Main Rd, Middletown, RI, 02842 >[EMAIL PROTECTED] >www.rite-solutions.com >(401) 847-3399 x26 (office) >(401) 847-8833 (fax) >=================================== > _______________________________________________ Newbie mailing list [EMAIL PROTECTED] *** To unsubscribe , or change message options, see: http://XFree86.Org/mailman/listinfo/newbie _______________________________________________ Newbie mailing list [EMAIL PROTECTED] *** To unsubscribe , or change message options, see: http://XFree86.Org/mailman/listinfo/newbie
