Someone correct me if I'm way off base here but the no cranking when you hit the button might be a starter issue. I had that wiith my first '83. All the lights would work just fine but it wouldn't crank. When I had the starter replaced, the guy who did it said that the core came out in two pieces.
On Jan 8, 7:16 pm, greentxnighthawk <[email protected]> wrote: > I recently blew a master fuse on my 1982 450 Nighthawk. > I replaced it,and it blew again. > So I went to my Climers manual 4 help and troubleshooting,after > pushing my bike 2 and a half miles home. I took my battery to the bike > store I frequent to charge,thinking the battery was dead (it was) and > I traced all my wires and found a cupple exposed wires,which i fixed! > I turn on the iggnition,the oil and nuetral come on and i hit the > start button and it trys to start.But its a little cold out,so I have > to try a cupple times to get it running.after 4 trys the start > button,wont work.the console lights r still on,fuse is still good,but > no cranking to start. > I get the battery recharged,put it back in the bike and it blows the > master fuse AGAIN when I turn on the iggnition! > What could be the problem??? > Could I have a bad battery??? > Or something ealse??? > I allso recently took the Vetter fairing off and put a universal > headlight on,but the problems didnt start happening till weeks > after,the change. --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en -~----------~----~----~----~------~----~------~--~---
