No, I didn't and I read everything. 
Sounds like you can't catch a break. The 700s ? lets call that a separate item. 
You did see the diagrams I sent ? For now I don't have any other input. I'll 
ask again (3rd time) about the air-box. Is it there, in place with filter, lid 
too ?  

--- On Thu, 3/19/09, Graham Rogers <[email protected]> wrote:
From: Graham Rogers <[email protected]>
Subject: [Nighthawk Lovers] Re: Choke not operating properly
To: [email protected]
Date: Thursday, March 19, 2009, 3:38 AM


Dennis I don't know if you saw this message a couple of nights ago. I still 
have the carbs off.
 I sent Hi Dennis,  I just took my CB750F off and apart and cleaned them 
again.  I did the needle jets and the slow speed jets.  The carbs are back 
together but I'll leave them off the bike until tomorrow in case you have any 
other suggestions,  Graham
Today I took my CB700SC out for a spin - the speedo needle broke, the gas gauge 
quit working (or wasn't working and I only just noticed). When I started the 
bike up the gas gauge would 'go up' as the engine revved up but then quit 
altogether. .  I'll get back to it when I'm done with the CB750F. Graham again.
On Mar 15, 2009, at 12:29 PM, Dennis Hammerl wrote:
 
<97b363.jpg> 

On Mar 19, 2009, at 12:34 AM, Dennis Hammerl wrote:
Can I get an Amen ?

--- On Thu, 3/19/09, Creative Residential 
Designs <[email protected]> wrote:
From: Creative Residential Designs <[email protected]>
Subject: [Nighthawk Lovers] Re: Choke not operating properly
To: [email protected]
Date: Thursday, March 19, 2009, 12:32 AM

It's like a 12 step program brothers and (occasional) sisters...take what you 
need and leave the rest. Now I'll pass around the plate for donations to The 
Restoration of the Holy Nighthawk Fund.....HotrodMamma.----- Original Message 
-----From: Dennis HammerlTo: [email protected]: Wednesday, 
March 18, 2009 10:08 PMSubject: [Nighthawk Lovers] Re: Choke not operating 
properly
Oh yeah, sensitivity training too. Big brother is watching

--- On Wed, 3/18/09, Kyle Munz <[email protected]> wrote:
From: Kyle Munz <[email protected]>
Subject: [Nighthawk Lovers] Re: Choke not operating properly
To: [email protected]
Date: Wednesday, March 18, 2009, 2:11 PM

I'm supposed to learn how to have social graces now too???

-Kyle

On Wed, Mar 18, 2009 at 1:41 PM, Mark Hasslinger <[email protected]> wrote:
Gibbs Oil is Motrocycle relavant and any messages pertaining to this and 
similiar threads are appropiate for this group.  what is not approiate are the 
bothersome post regarding off topic STUFF like linux.  these nerds need to 
develope some social graces and stat IMing each other instead of bothering the 
group and loading up our IN BOXES.

--- On Wed, 3/18/09, jeff scott <[email protected]> wrote:
From: jeff scott <[email protected]>
Subject: [Nighthawk Lovers] Re: Choke not operating properly
To: [email protected]
Date: Wednesday, March 18, 2009, 9:23 AM



Is it normal that i am getting everyones messages to each other? is there a way 
to opt out of getting 1540 personal messages that seem like they should be 
going only to the person intended without deleting all mail from this site?
 Have a great day ~ J. Scott



________________________________
From: Josh Bowlin <[email protected]>
To: [email protected]
Sent: Wednesday, March 18, 2009 10:11:10 AM
Subject: [Nighthawk Lovers] Re: Choke not operating properly

Well, the only way we ever come across the stuff is at a swap meet.  I did find 
a link to get it online.  If you follow the link you can order off of there.  I 
plan on buying a case when I get paid again.  Its the cheapest route and it 
doesnt go bad and will be used.  Cheap wise i dont know if its cheaper but im a 
firm believer that its worth every penny.


On Wed, Mar 18, 2009 at 8:59 AM, stanley/ Randolph <[email protected]> wrote:

You're reading words from a person who has long been looking for something 
inexpensive to use because WD40, I am sorry, is not worth the money.  Gibbs 
sounds like one really good alternative.  Do you know its chemical 
coomposition?  We don't have it around here because all the mom-and-pops have 
already been put out of business.
 
Stanley




________________________________
From: Josh Bowlin <[email protected]> 

To: [email protected]
Sent: Wednesday, March 18, 2009 8:51:40 AM 

Subject: [Nighthawk Lovers] Re: Choke not operating properly


Ok the story behind me and gibbs is as follows.  My dad and i run antique gas 
engines. When I was 10 we were at our summer show and there was a gentle men 
who gave my father a 4oz sample can.  At that point and time my father had just 
restored a john deer tractor and the throttle was sticking sooo bad that he 
would have to ball up a fist and knock on it pretty hard to get the tractor to 
idle faster, and he would have to hit it hard several times to get it to rev 
the motor up.  Well he tried all kinds of things, WD-40, oil, grease, etc..well 
he sprayed some gibbs on it and we were both like Meh it wont work... Well as 
most things we got busy and it sat for a day or two, then we went out and fired 
up the tractor, my dad reached up with a balled fist and knocked on the 
throttle like he normally would and damn near broke the throttle off the 
tractor.  Since that day i have lived by the stuff.  You can use it as 
a lubricant, a cleaner, a
 rubber/plastic protectant, we have used it like ether to make an engine fire, 
we have polished chrome and metal with it, it prevents rust.  We have sprayed 
it on distributers and it works as a waterproofer.  Now i dont know how many of 
you know how a distrubutor works on an engine but if they get wet they are 
royally screwed till they dry out.  Well im confident enough (and ive done it 
before) that i willl spray down the distributer with gibbs and then dump a 
bucket of water on it with the engine/motor running and guarantee it wont miss 
a lick.  So in other words I replaced my can of WD-40 about 13 years ago and 
use the gibbs for what it could do and then some.       if you have any other 
types of questions about it just ask lol.    


On Wed, Mar 18, 2009 at 8:37 AM, Creative Residential Designs 
<[email protected]> wrote:

Hey Josh...how does the Gib's compare to WD-40? I live by WD-40 and keep a can 
next to my bike at all times. I anoint my bikes from top to bottom with a rag 
o' WD-40 chrome and all. It stops rust on my chrome dead in it's tracks along 
with all of it's other applications. I'm always open to try a new thing though. 
HotrodMamma.
----- Original Message ----- 
From: Josh Bowlin 
To: [email protected] 
Sent: Wednesday, March 18, 2009 7:03 AM
Subject: [Nighthawk Lovers] Re: Choke not operating properly
http://threepeaksproducts.com/products/gibbslube/


On Wed, Mar 18, 2009 at 8:02 AM, Josh Bowlin <[email protected]> wrote:

I use a product called Gib's, something i live by.  But if you dont have any 
you can always try to put some wd-40 on the choke cable to make sure its lubed 
correctly or you can check to make sure its not getting stuck up on the carbs 
or just pure and simple stuck on the carbs.  Also try some wd-40 on the working 
mechanism on the carbs.
























      
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/nighthawk_lovers?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to