The air box is there and filter (cleaned) and lid.
Yes, I studied your diagrams, ID'd the jets and made sure I cleaned  
them. Man it really flies when you give it gas though, Graham


On Mar 20, 2009, at 1:02 AM, Dennis Hammerl wrote:

> No, I didn't and I read everything.
> Sounds like you can't catch a break. The 700s ? lets call that a  
> separate item.
> You did see the diagrams I sent ? For now I don't have any other  
> input. I'll ask again (3rd time) about the air-box. Is it there, in  
> place with filter, lid too ?
>
> --- On Thu, 3/19/09, Graham Rogers <[email protected]> wrote:
> From: Graham Rogers <[email protected]>
> Subject: [Nighthawk Lovers] Re: Choke not operating properly
> To: [email protected]
> Date: Thursday, March 19, 2009, 3:38 AM
>
> Dennis I don't know if you saw this message a couple of nights ago.  
> I still have the carbs off.
>
>  I sent Hi Dennis,  I just took my CB750F off and apart and cleaned  
> them again.  I did the needle jets and the slow speed jets.  The  
> carbs are back together but I'll leave them off the bike until  
> tomorrow in case you have any other suggestions,  Graham
>
> Today I took my CB700SC out for a spin - the speedo needle broke,  
> the gas gauge quit working (or wasn't working and I only just  
> noticed). When I started the bike up the gas gauge would 'go up' as  
> the engine revved up but then quit altogether. .  I'll get back to  
> it when I'm done with the CB750F. Graham again.
>
> On Mar 15, 2009, at 12:29 PM, Dennis Hammerl wrote:
>
>
>> <97b363.jpg>
>>
>
> On Mar 19, 2009, at 12:34 AM, Dennis Hammerl wrote:
>
>> Can I get an Amen ?
>>
>> --- On Thu, 3/19/09, Creative Residential Designs  
>> <[email protected]> wrote:
>> From: Creative Residential Designs <[email protected]>
>> Subject: [Nighthawk Lovers] Re: Choke not operating properly
>> To: [email protected]
>> Date: Thursday, March 19, 2009, 12:32 AM
>>
>> It's like a 12 step program brothers and (occasional)  
>> sisters...take what you need and leave the rest. Now I'll pass  
>> around the plate for donations to The Restoration of the Holy  
>> Nighthawk Fund.....HotrodMamma.
>> ----- Original Message -----
>> From: Dennis Hammerl
>> To: [email protected]
>> Sent: Wednesday, March 18, 2009 10:08 PM
>> Subject: [Nighthawk Lovers] Re: Choke not operating properly
>>
>> Oh yeah, sensitivity training too. Big brother is watching
>>
>> --- On Wed, 3/18/09, Kyle Munz <[email protected]> wrote:
>> From: Kyle Munz <[email protected]>
>> Subject: [Nighthawk Lovers] Re: Choke not operating properly
>> To: [email protected]
>> Date: Wednesday, March 18, 2009, 2:11 PM
>>
>> I'm supposed to learn how to have social graces now too???
>>
>> -Kyle
>>
>> On Wed, Mar 18, 2009 at 1:41 PM, Mark Hasslinger  
>> <[email protected]> wrote:
>> Gibbs Oil is Motrocycle relavant and any messages pertaining to  
>> this and similiar threads are appropiate for this group.  what is  
>> not approiate are the bothersome post regarding off topic STUFF  
>> like linux.  these nerds need to develope some social graces and  
>> stat IMing each other instead of bothering the group and loading  
>> up our IN BOXES.
>>
>> --- On Wed, 3/18/09, jeff scott <[email protected]> wrote:
>> From: jeff scott <[email protected]>
>>
>> Subject: [Nighthawk Lovers] Re: Choke not operating properly
>> To: [email protected]
>> Date: Wednesday, March 18, 2009, 9:23 AM
>>
>>
>>
>>
>> Is it normal that i am getting everyones messages to each other?  
>> is there a way to opt out of getting 1540 personal messages that  
>> seem like they should be going only to the person intended without  
>> deleting all mail from this site?
>>
>> Have a great day ~ J. Scott
>>
>>
>>
>>
>> ________________________________
>> From: Josh Bowlin <[email protected]>
>> To: [email protected]
>> Sent: Wednesday, March 18, 2009 10:11:10 AM
>> Subject: [Nighthawk Lovers] Re: Choke not operating properly
>>
>> Well, the only way we ever come across the stuff is at a swap  
>> meet.  I did find a link to get it online.  If you follow the link  
>> you can order off of there.  I plan on buying a case when I get  
>> paid again.  Its the cheapest route and it doesnt go bad and will  
>> be used.  Cheap wise i dont know if its cheaper but im a firm  
>> believer that its worth every penny.
>>
>>
>> On Wed, Mar 18, 2009 at 8:59 AM, stanley/ Randolph  
>> <[email protected]> wrote:
>>
>> You're reading words from a person who has long been looking for  
>> something inexpensive to use because WD40, I am sorry, is not  
>> worth the money.  Gibbs sounds like one really good alternative.   
>> Do you know its chemical coomposition?  We don't have it around  
>> here because all the mom-and-pops have already been put out of  
>> business.
>>
>> Stanley
>>
>>
>>
>>
>> ________________________________
>> From: Josh Bowlin <[email protected]>
>>
>> To: [email protected]
>> Sent: Wednesday, March 18, 2009 8:51:40 AM
>>
>> Subject: [Nighthawk Lovers] Re: Choke not operating properly
>>
>>
>> Ok the story behind me and gibbs is as follows.  My dad and i run  
>> antique gas engines. When I was 10 we were at our summer show and  
>> there was a gentle men who gave my father a 4oz sample can.  At  
>> that point and time my father had just restored a john deer  
>> tractor and the throttle was sticking sooo bad that he would have  
>> to ball up a fist and knock on it pretty hard to get the tractor  
>> to idle faster, and he would have to hit it hard several times to  
>> get it to rev the motor up.  Well he tried all kinds of things,  
>> WD-40, oil, grease, etc..well he sprayed some gibbs on it and we  
>> were both like Meh it wont work... Well as most things we got busy  
>> and it sat for a day or two, then we went out and fired up the  
>> tractor, my dad reached up with a balled fist and knocked on the  
>> throttle like he normally would and damn near broke the throttle  
>> off the tractor.  Since that day i have lived by the stuff.  You  
>> can use it as a lubricant, a cleaner, a rubber/plastic protectant,  
>> we have used it like ether to make an engine fire, we have  
>> polished chrome and metal with it, it prevents rust.  We have  
>> sprayed it on distributers and it works as a waterproofer.  Now i  
>> dont know how many of you know how a distrubutor works on an  
>> engine but if they get wet they are royally screwed till they dry  
>> out.  Well im confident enough (and ive done it before) that i  
>> willl spray down the distributer with gibbs and then dump a bucket  
>> of water on it with the engine/motor running and guarantee it wont  
>> miss a lick.  So in other words I replaced my can of WD-40 about  
>> 13 years ago and use the gibbs for what it could do and then  
>> some.       if you have any other types of questions about it just  
>> ask lol.
>>
>>
>> On Wed, Mar 18, 2009 at 8:37 AM, Creative Residential Designs  
>> <[email protected]> wrote:
>>
>> Hey Josh...how does the Gib's compare to WD-40? I live by WD-40  
>> and keep a can next to my bike at all times. I anoint my bikes  
>> from top to bottom with a rag o' WD-40 chrome and all. It stops  
>> rust on my chrome dead in it's tracks along with all of it's other  
>> applications. I'm always open to try a new thing though. HotrodMamma.
>> ----- Original Message -----
>> From: Josh Bowlin
>> To: [email protected]
>> Sent: Wednesday, March 18, 2009 7:03 AM
>> Subject: [Nighthawk Lovers] Re: Choke not operating properly
>> http://threepeaksproducts.com/products/gibbslube/
>>
>>
>> On Wed, Mar 18, 2009 at 8:02 AM, Josh Bowlin <[email protected]>  
>> wrote:
>>
>> I use a product called Gib's, something i live by.  But if you  
>> dont have any you can always try to put some wd-40 on the choke  
>> cable to make sure its lubed correctly or you can check to make  
>> sure its not getting stuck up on the carbs or just pure and simple  
>> stuck on the carbs.  Also try some wd-40 on the working mechanism  
>> on the carbs.
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>
>
>
>
>
> >


--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/nighthawk_lovers?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to