Thanks for the response.... Unfortunately the replacement tank did not have the cap. I am using the cap that was on the original (evap system) tank. Is there a way to modify the cap? Or should I start looking for a vented cap?
On Apr 23, 11:23 am, "Joe '86 450" <[email protected]> wrote: > My 450's evaporative control system was removed by the previous owner > and the bike runs fine. If you are re-using your old cap make sure it > is vented. The cap on the california models is supposed to seal tight > and the tank is vented through the evap system. > > On Apr 22, 8:33 am, solarDog <[email protected]> wrote: > > > I recently replaced a rusted out gas tank on a 85 Nighthawk 650. I > > did not realize that the replacement tank did not have the output > > "drain" to attach to the bike's evaporative emissions control system. > > I know that this is a California requirement.( I live in Vermont ) > > My question is can I bypass this by pinching the hose or is it more > > involved? > > Any input would be greatly appreciated. --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en -~----------~----~----~----~------~----~------~--~---
