hey would these instructions be the same for a '93 750 tach cable? On Sat, Feb 20, 2010 at 6:38 PM, Graham Rogers <[email protected]> wrote:
> the cable on your 450 goes from the tach to the port on the R side of the > engine, just inside the R exhaust right? The black outer cover on the cable > on mine is melted away from touching the exhaust. Your question is how to > get them into the ports right? I put the cable into the tach first since > the other end is free to 'adjust' the inner cable till it fits in the port > at the tach. Then with the securing screw removed insert the other end of > the cable into the engine port. You may have to line the inner cable up but > that is possible because the inner tach cable can be turned while the other > end is in the tach. I haven't had any problem starting at either place - > the tach or the engine - just a bit of jiggling gets them in. Then replace > the securing screw back in the engine port. > > > On Feb 20, 2010, at 12:49 AM, shadowfarside wrote: > > As it says in the beginning of my first post, I have a 1985 honda >> nighthawk CB450SC >> >> On Feb 19, 1:48 pm, Graham Rogers <[email protected]> wrote: >> >>> What is your bike? >>> >>> On Feb 19, 2010, at 10:54 AM, shadowfarside wrote: >>> >>> No, on my bike the tach is not electrical but works on a system of >>>> magnets. It hooks into the bike through this cable, the speedo is a >>>> seperate cable. I know WhERE these things go, but I do not know HOW to >>>> install it. >>>> >>> >>> On Feb 18, 3:32 pm, "DICK MACINNES" <[email protected]> wrote: >>>> >>>>> The CB650SC tach is electrical and does not have a cable. The >>>>> thick cable >>>>> coming out of the back of the case is probably the speedometer. >>>>> >>>> >>> Dick >>>>> >>>> >>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "Nighthawk Motorcycle Lovers!" group. >>>> To post to this group, send email to >>>> [email protected]. >>>> To unsubscribe from this group, send email to nighthawk_lovers >>>> [email protected]. >>>> For more options, visit this group athttp://groups.google.com/ >>>> group/nighthawk_lovers?hl=en. >>>> >>> >> -- >> You received this message because you are subscribed to the Google Groups >> "Nighthawk Motorcycle Lovers!" group. >> To post to this group, send email to [email protected]. >> To unsubscribe from this group, send email to nighthawk_lovers+ >> [email protected]. >> For more options, visit this group at http://groups.google.com/ >> group/nighthawk_lovers?hl=en. >> >> >> > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]<nighthawk_lovers%[email protected]> > . > For more options, visit this group at > http://groups.google.com/group/nighthawk_lovers?hl=en. > > -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en.
