Sometimes the O-Rings get hard and don't seal as well when they get old.
Other times they can get a little bit of a twist in them in the channel and
not seal well. Sometimes there's nothing wrong with them and they just need
to be removed and reseated, or replaced...

-Kyle


On Mon, Jul 5, 2010 at 10:01 PM, Joey Kelley <[email protected]> wrote:

> Hello all,
>         Last night, when I arrived at a friends house to watch the
> fireworks, I discovered two puddles under my NH. One is normal - one
> of my carbs leaks out the drain line. Has for 11,000 miles. The other
> however, caused me some concern. Upon inspection I found lubricating
> oil leaking out of the O-ring gasket under the oil filter cover.
>          Words were uttered. (Some under my breath)
>          Checking the oil level - I discovered she was not
> significantly low - and I rode her the mile back home. My first
> thought was I'm very glad this didn't start on my 331 mile day last
> week.
>          Today I called three auto parts places to find one with the
> proper oil filter in stock and not having enough time to get in
> contact with my Amsoil dealer, I took someones suggestion (Graham
> perhaps?) and picked up a gallon of Rotella T.
>          Not having my own garage - I made a speed trip to my Folks
> place, smelling burning oil and feeling it hit my boot the whole way.
> Not a good feeling. Upon arrival I dropped the oil and filter and gave
> a very detailed inspection to the cover, the o-rings involved and the
> channels they ride in. Neither Dad nor I could find any problems. So,
> put fresh oil in and a new filter installed, and off for a test ride.
> No issues at all - put about 125 miles on - no issues. I'm
> flabbergasted. Never had anything like this happen on this bike and
> Dad has never seen anything like it either. Anyone else have thoughts
> on the subject?
>          In the middle of my 125 mile extended test ride, I happened
> upon a 1984 Goldwing with the Interstate package for sale. Threw a leg
> over it and discovered that, much to my surprise, my 30" inseam is
> sufficient to ride on one. (Wanna guess what I'm thinking of doing to
> solve my long distance cramping problem?)
>          Overall a good day - but not what I'd hoped I'd be doing.
>          -Joey
>
> --
> -Joey Kelley
>
> --
> You received this message because you are subscribed to the Google Groups
> "Nighthawk Motorcycle Lovers!" group.
> To post to this group, send email to [email protected].
> To unsubscribe from this group, send email to
> [email protected]<nighthawk_lovers%[email protected]>
> .
> For more options, visit this group at
> http://groups.google.com/group/nighthawk_lovers?hl=en.
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to 
[email protected].
For more options, visit this group at 
http://groups.google.com/group/nighthawk_lovers?hl=en.

Reply via email to