perhaps it was unevenly over torqued on the install?

On Jul 6, 8:01 am, Joey Kelley <[email protected]> wrote:
> Yes,
>         Just for good measure I grabbed a ratchet and socket and tried
> to tighten it. No such luck.
>         When Dad and I dumped the oil, I actually had to straddle the
> bike and hold it in place while he put some torque on he ratchet to
> get it off. There was no looseness involved.
>          Both the o-ring coming out and new one going in were
> inspected - no obvious damage noted.
>            -Joey
>
>
>
> On Tue, Jul 6, 2010 at 7:58 AM, Anthony <[email protected]> wrote:
> > Did you check to make sure that the cover was still torqued down and
> > did not loosen?
>
> > On Jul 5, 11:01 pm, Joey Kelley <[email protected]> wrote:
> >> Hello all,
> >>          Last night, when I arrived at a friends house to watch the
> >> fireworks, I discovered two puddles under my NH. One is normal - one
> >> of my carbs leaks out the drain line. Has for 11,000 miles. The other
> >> however, caused me some concern. Upon inspection I found lubricating
> >> oil leaking out of the O-ring gasket under the oil filter cover.
> >>           Words were uttered. (Some under my breath)
> >>           Checking the oil level - I discovered she was not
> >> significantly low - and I rode her the mile back home. My first
> >> thought was I'm very glad this didn't start on my 331 mile day last
> >> week.
> >>           Today I called three auto parts places to find one with the
> >> proper oil filter in stock and not having enough time to get in
> >> contact with my Amsoil dealer, I took someones suggestion (Graham
> >> perhaps?) and picked up a gallon of Rotella T.
> >>           Not having my own garage - I made a speed trip to my Folks
> >> place, smelling burning oil and feeling it hit my boot the whole way.
> >> Not a good feeling. Upon arrival I dropped the oil and filter and gave
> >> a very detailed inspection to the cover, the o-rings involved and the
> >> channels they ride in. Neither Dad nor I could find any problems. So,
> >> put fresh oil in and a new filter installed, and off for a test ride.
> >> No issues at all - put about 125 miles on - no issues. I'm
> >> flabbergasted. Never had anything like this happen on this bike and
> >> Dad has never seen anything like it either. Anyone else have thoughts
> >> on the subject?
> >>           In the middle of my 125 mile extended test ride, I happened
> >> upon a 1984 Goldwing with the Interstate package for sale. Threw a leg
> >> over it and discovered that, much to my surprise, my 30" inseam is
> >> sufficient to ride on one. (Wanna guess what I'm thinking of doing to
> >> solve my long distance cramping problem?)
> >>           Overall a good day - but not what I'd hoped I'd be doing.
> >>           -Joey
>
> >> --
> >> -Joey Kelley
>
> > --- Hide quoted text -
>
> - Show quoted text -

-- 
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to 
[email protected].
For more options, visit this group at 
http://groups.google.com/group/nighthawk_lovers?hl=en.

Reply via email to