Yep. Radio Shack no.4 washers. I remember that much of the write-ups at nighthawk.750.
Seems I also recall four quarter-inch holes specified in each funnel on the Hodge mod, but I'm not as certain of that remembrance. On Dec 20, 5:25 pm, "Allen Thomas" <[email protected]> wrote: > If you are at roughly sea level, try turning out your pilot screws to 3 to 3 > 1/4 turns and stick 2 washers under each needle. Installing larger jets will > give you more power across the board, but those mods will make the bike run > better when cold, and give a little more power from low to mid range. > Sent via BlackBerry by AT&T > > > > -----Original Message----- > From: Ryan Bray <[email protected]> > > Sender: [email protected] > Date: Tue, 20 Dec 2011 08:06:23 > To: <[email protected]> > Reply-To: [email protected] > Subject: Re: [Nighthawk Lovers]www.nighthawk750.comis down > > Thanks for the heads up Allen. Swiss cheese it is! > > I have to go outta town this weekend for the holidays but can't wait to get > at it next week. I'll try and get some pics for the thread > before/during/after... > > -Ryan > > On Tue, Dec 20, 2011 at 4:10 AM, Allen Thomas <[email protected]> wrote: > > > You can swiss cheese the heck out of it and it will be fine all you really > > need is the plate at the end. Total removal is too loud. > > Sent via BlackBerry by AT&T > > > -----Original Message----- > > From: sdguero <[email protected]> > > Sender: [email protected] > > Date: Mon, 19 Dec 2011 17:05:18 > > To: Nighthawk Motorcycle Lovers!<[email protected]> > > Reply-To: [email protected] > > Subject: [Nighthawk Lovers]www.nighthawk750.comis down > > > Hey guys, > > > Just bought a '93 Nighthawk a few weeks ago and was looking around > > online to see if I could do something for the exhaust without spending > > $350 (the bike was only $1500!). Unfortunately thewww.nighthawk750.com > > site appears to be down now. :( > > > I saw some brief instructions on this thread for the washer mod and > > found a youtube video for the hodge exhaust mod. I think i'm going to > > try them out soon... > > > Any thoughts on drilling larger holes in the exhaust (1/2 or 5/8th > > inch) for a deeper growl? > > > Also, my cousin, who is very mechanically inclined (I'm somewhat), was > > recommending I remove the baffles entirely and have a shop tack weld > > in a piece of steel into the muffler to maintain back pressure. I kind > > of like this idea because I'm really looking for as much noise and > > rumble as possible. > > > This is a commuter bike and I want people to hear me coming on the San > > Diego freeways... > > > Thanks! > > Ryan > > > PS Any replies are appreciated. I will report back on what I find once > > I apply the mods. It will probably be a couple weeks. Thanks again! > > > -- > > You received this message because you are subscribed to the Google Groups > > "Nighthawk Motorcycle Lovers!" group. > > To post to this group, send email to [email protected]. > > To unsubscribe from this group, send email to > > [email protected]. > > For more options, visit this group at > >http://groups.google.com/group/nighthawk_lovers?hl=en. > > > -- > > You received this message because you are subscribed to the Google Groups > > "Nighthawk Motorcycle Lovers!" group. > > To post to this group, send email to [email protected]. > > To unsubscribe from this group, send email to > > [email protected]. > > For more options, visit this group at > >http://groups.google.com/group/nighthawk_lovers?hl=en. > > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group > athttp://groups.google.com/group/nighthawk_lovers?hl=en.- Hide quoted text - > > - Show quoted text - -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en.
