Roger that. Some bikes sound good loud. Hondas just sound like loud Hondas.
On Dec 21, 8:36 am, Kurt Nolte <[email protected]> wrote: > I agree with the comment about total removal being too loud. There's a 250 > here in my area with he cores removed from the stock exhaust, it's louder > than a bleeding Harley. > > Kurt > On Dec 21, 2011 8:31 AM, "surfswab" <[email protected]> wrote: > > > > > Yep. Radio Shack no.4 washers. I remember that > > much of the write-ups at nighthawk.750. > > > Seems I also recall four quarter-inch holes specified > > in each funnel on the Hodge mod, but I'm not as > > certain of that remembrance. > > > On Dec 20, 5:25 pm, "Allen Thomas" <[email protected]> wrote: > > > If you are at roughly sea level, try turning out your pilot screws to 3 > > to 3 1/4 turns and stick 2 washers under each needle. Installing larger > > jets will give you more power across the board, but those mods will make > > the bike run better when cold, and give a little more power from low to mid > > range. > > > Sent via BlackBerry by AT&T > > > > -----Original Message----- > > > From: Ryan Bray <[email protected]> > > > > Sender: [email protected] > > > Date: Tue, 20 Dec 2011 08:06:23 > > > To: <[email protected]> > > > Reply-To: [email protected] > > > Subject: Re: [Nighthawk Lovers]www.nighthawk750.comisdown > > > > Thanks for the heads up Allen. Swiss cheese it is! > > > > I have to go outta town this weekend for the holidays but can't wait to > > get > > > at it next week. I'll try and get some pics for the thread > > > before/during/after... > > > > -Ryan > > > > On Tue, Dec 20, 2011 at 4:10 AM, Allen Thomas <[email protected]> > > wrote: > > > > > You can swiss cheese the heck out of it and it will be fine all you > > really > > > > need is the plate at the end. Total removal is too loud. > > > > Sent via BlackBerry by AT&T > > > > > -----Original Message----- > > > > From: sdguero <[email protected]> > > > > Sender: [email protected] > > > > Date: Mon, 19 Dec 2011 17:05:18 > > > > To: Nighthawk Motorcycle Lovers!<[email protected]> > > > > Reply-To: [email protected] > > > > Subject: [Nighthawk Lovers]www.nighthawk750.comisdown > > > > > Hey guys, > > > > > Just bought a '93 Nighthawk a few weeks ago and was looking around > > > > online to see if I could do something for the exhaust without spending > > > > $350 (the bike was only $1500!). Unfortunately thewww.nighthawk750.com > > > > site appears to be down now. :( > > > > > I saw some brief instructions on this thread for the washer mod and > > > > found a youtube video for the hodge exhaust mod. I think i'm going to > > > > try them out soon... > > > > > Any thoughts on drilling larger holes in the exhaust (1/2 or 5/8th > > > > inch) for a deeper growl? > > > > > Also, my cousin, who is very mechanically inclined (I'm somewhat), was > > > > recommending I remove the baffles entirely and have a shop tack weld > > > > in a piece of steel into the muffler to maintain back pressure. I kind > > > > of like this idea because I'm really looking for as much noise and > > > > rumble as possible. > > > > > This is a commuter bike and I want people to hear me coming on the San > > > > Diego freeways... > > > > > Thanks! > > > > Ryan > > > > > PS Any replies are appreciated. I will report back on what I find once > > > > I apply the mods. It will probably be a couple weeks. Thanks again! > > > > > -- > > > > You received this message because you are subscribed to the Google > > Groups > > > > "Nighthawk Motorcycle Lovers!" group. > > > > To post to this group, send email to [email protected] > > . > > > > To unsubscribe from this group, send email to > > > > [email protected]. > > > > For more options, visit this group at > > > >http://groups.google.com/group/nighthawk_lovers?hl=en. > > > > > -- > > > > You received this message because you are subscribed to the Google > > Groups > > > > "Nighthawk Motorcycle Lovers!" group. > > > > To post to this group, send email to [email protected] > > . > > > > To unsubscribe from this group, send email to > > > > [email protected]. > > > > For more options, visit this group at > > > >http://groups.google.com/group/nighthawk_lovers?hl=en. > > > > -- > > > You received this message because you are subscribed to the Google > > Groups "Nighthawk Motorcycle Lovers!" group. > > > To post to this group, send email to [email protected]. > > > To unsubscribe from this group, send email to > > [email protected]. > > > For more options, visit this group athttp:// > > groups.google.com/group/nighthawk_lovers?hl=en.- Hide quoted text - > > > > - Show quoted text - > > > -- > > You received this message because you are subscribed to the Google Groups > > "Nighthawk Motorcycle Lovers!" group. > > To post to this group, send email to [email protected]. > > To unsubscribe from this group, send email to > > [email protected]. > > For more options, visit this group at > >http://groups.google.com/group/nighthawk_lovers?hl=en.- Hide quoted text - > > - Show quoted text - -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en.
