Has it ever run right to your knowledge. Did you do anything else done besides cleaning the carbs? Did you count the turns on the fuel screws before removing them? Will it start without the choke? Sent via BlackBerry by AT&T
-----Original Message----- From: Ralf Oehlerich <[email protected]> Sender: [email protected] Date: Tue, 28 Feb 2012 03:17:39 To: <[email protected]> Reply-To: [email protected] Subject: [Nighthawk Lovers] 81 CB750C Carbs idling at 3500??? Working on a 81 CB750 custom and just cleaned the jets on the carbs. Put everything back on the bike and she idles at 3500 rpm. Could that be a bad fit/too much air? Cables are free and idle screw is all the way out. Air box and filter are in place. Plugs are NOT new. She runs fine, just WAY too high even with choke off when cold. -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en. -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en.
