Jump the selenoid with a screwdriver. It should crank if the battery is good. Sent via BlackBerry by AT&T
-----Original Message----- From: Jeff <[email protected]> Sender: [email protected] Date: Wed, 21 Aug 2013 13:38:02 To: <[email protected]> Reply-To: [email protected] Subject: [Nighthawk Lovers] Re: Finished putting together the bike but it won't start Ok this is starting to annoy me. Suddenly it stopped cranking. I double checked the starter motor and it's fine, it works when directly connected. There are no clicking noise. Its like when you have it on gear or have the kickstand on and try to start. I know that can be bypassed by holding the clutch. Any idea on what it could be? -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/nighthawk_lovers. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/nighthawk_lovers. For more options, visit https://groups.google.com/groups/opt_out.
