Measure the forks. I know the 82 650 NH has the same diameter tubes as a 82 750 but the standard 650 uses smaller tubes. As for length and brake mounts and such I don't know. So while a 650 NH fork may fit the triple clamps it could still be all wrong.
You can remove the tank sensor and clean the contacts on the float arm. You can clean up the pits in the fork tubes with aluminum foil then fill them in with epoxy if necessary. However I have been surprised before where forks that I thought would leak from pitting didn't after replacing the seals. Allen Thomas -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/nighthawk_lovers. For more options, visit https://groups.google.com/d/optout.
