Hello,

The idea was to use the modesetting DDX instead of Nouveau’s one for Maxwell+
as EXA was [broken][1]. But you can give a try at Ilia’s [patches][2], which
fix the Nouveau DDX for GM10x and GM20x (I don’t think it has been tested on a
GM108 yet).

Best regards,
Pierre Moreau

[1]: 
https://cgit.freedesktop.org/nouveau/xf86-video-nouveau/commit/?id=3e2e0faa2ee1cce9c1bb5c7ad80d0592460f3edc
[2]: https://github.com/imirkin/xf86-video-nouveau/


On 11:29 am - Oct 18 2016, Sune Mølgaard wrote:
> Hi,
> 
> It would seem like it (attachments are from 4.9-rc1, btw), but it
> doesn't look like there is any support in the Xorg driver.
> 
> How can I help with that?
> 
> Best regards,
> 
> Sune Mølgaard
> Translucent ApS
> 
> On 2016-04-22 09:33, Pierre Moreau wrote:
> > Hello,
> > 
> > A patch was merged yesterday to recognise GM108 (see
> > https://github.com/skeggsb/nouveau/commit/3da1f2a19e5e8dc8d68a4400d9cca01c64ecd59e).
> > I guess it will make it into 4.7.
> > 
> > Pierre
> 

> lspci -vvvv
> 00:00.0 Host bridge: Intel Corporation Broadwell-U Host Bridge -OPI (rev 09)
>       Subsystem: Lenovo Broadwell-U Host Bridge -OPI
>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx-
>       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort+ >SERR- <PERR- INTx-
>       Latency: 0
>       Capabilities: <access denied>
>       Kernel driver in use: bdw_uncore
> 
> 00:02.0 VGA compatible controller: Intel Corporation Broadwell-U Integrated 
> Graphics (rev 09) (prog-if 00 [VGA controller])
>       Subsystem: Lenovo Broadwell-U Integrated Graphics
>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx+
>       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx-
>       Latency: 0
>       Interrupt: pin A routed to IRQ 49
>       Region 0: Memory at f2000000 (64-bit, non-prefetchable) [size=16M]
>       Region 2: Memory at c0000000 (64-bit, prefetchable) [size=512M]
>       Region 4: I/O ports at 4000 [size=64]
>       [virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
>       Capabilities: <access denied>
>       Kernel driver in use: i915
>       Kernel modules: i915
> 
> 00:03.0 Audio device: Intel Corporation Broadwell-U Audio Controller (rev 09)
>       Subsystem: Lenovo Broadwell-U Audio Controller
>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx+
>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx-
>       Latency: 0, Cache Line Size: 64 bytes
>       Interrupt: pin A routed to IRQ 50
>       Region 0: Memory at f4230000 (64-bit, non-prefetchable) [size=16K]
>       Capabilities: <access denied>
>       Kernel driver in use: snd_hda_intel
>       Kernel modules: snd_hda_intel
> 
> 00:14.0 USB controller: Intel Corporation Wildcat Point-LP USB xHCI 
> Controller (rev 03) (prog-if 30 [XHCI])
>       Subsystem: Lenovo Wildcat Point-LP USB xHCI Controller
>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx+
>       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>       Latency: 0
>       Interrupt: pin A routed to IRQ 42
>       Region 0: Memory at f4220000 (64-bit, non-prefetchable) [size=64K]
>       Capabilities: <access denied>
>       Kernel driver in use: xhci_hcd
> 
> 00:16.0 Communication controller: Intel Corporation Wildcat Point-LP MEI 
> Controller #1 (rev 03)
>       Subsystem: Lenovo Wildcat Point-LP MEI Controller
>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx+
>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx-
>       Latency: 0
>       Interrupt: pin A routed to IRQ 46
>       Region 0: Memory at f4239000 (64-bit, non-prefetchable) [size=32]
>       Capabilities: <access denied>
>       Kernel driver in use: mei_me
>       Kernel modules: mei_me
> 
> 00:19.0 Ethernet controller: Intel Corporation Ethernet Connection (3) I218-V 
> (rev 03)
>       Subsystem: Lenovo Ethernet Connection (3) I218-V
>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx+
>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx-
>       Latency: 0
>       Interrupt: pin A routed to IRQ 43
>       Region 0: Memory at f4200000 (32-bit, non-prefetchable) [size=128K]
>       Region 1: Memory at f423e000 (32-bit, non-prefetchable) [size=4K]
>       Region 2: I/O ports at 4080 [size=32]
>       Capabilities: <access denied>
>       Kernel driver in use: e1000e
>       Kernel modules: e1000e
> 
> 00:1b.0 Audio device: Intel Corporation Wildcat Point-LP High Definition 
> Audio Controller (rev 03)
>       Subsystem: Lenovo Wildcat Point-LP High Definition Audio Controller
>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx+
>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx-
>       Latency: 32, Cache Line Size: 64 bytes
>       Interrupt: pin A routed to IRQ 47
>       Region 0: Memory at f4234000 (64-bit, non-prefetchable) [size=16K]
>       Capabilities: <access denied>
>       Kernel driver in use: snd_hda_intel
>       Kernel modules: snd_hda_intel
> 
> 00:1c.0 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port 
> #6 (rev e3) (prog-if 00 [Normal decode])
>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx-
>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx-
>       Latency: 0, Cache Line Size: 64 bytes
>       Interrupt: pin B routed to IRQ 17
>       Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
>       I/O behind bridge: 0000f000-00000fff
>       Memory behind bridge: f4100000-f41fffff
>       Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
>       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort+ <SERR- <PERR-
>       BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>       Capabilities: <access denied>
>       Kernel driver in use: pcieport
>       Kernel modules: shpchp
> 
> 00:1c.1 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port 
> #3 (rev e3) (prog-if 00 [Normal decode])
>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx-
>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx-
>       Latency: 0, Cache Line Size: 64 bytes
>       Interrupt: pin C routed to IRQ 18
>       Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
>       I/O behind bridge: 0000f000-00000fff
>       Memory behind bridge: f4000000-f40fffff
>       Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
>       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort+ <SERR- <PERR-
>       BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>       Capabilities: <access denied>
>       Kernel driver in use: pcieport
>       Kernel modules: shpchp
> 
> 00:1c.4 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port 
> #5 (rev e3) (prog-if 00 [Normal decode])
>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx-
>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx-
>       Latency: 0, Cache Line Size: 64 bytes
>       Interrupt: pin A routed to IRQ 16
>       Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
>       I/O behind bridge: 00003000-00003fff
>       Memory behind bridge: f3000000-f3ffffff
>       Prefetchable memory behind bridge: 00000000e0000000-00000000f1ffffff
>       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort+ <SERR- <PERR-
>       BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>       Capabilities: <access denied>
>       Kernel driver in use: pcieport
>       Kernel modules: shpchp
> 
> 00:1d.0 USB controller: Intel Corporation Wildcat Point-LP USB EHCI 
> Controller (rev 03) (prog-if 20 [EHCI])
>       Subsystem: Lenovo Wildcat Point-LP USB EHCI Controller
>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx-
>       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>       Latency: 0
>       Interrupt: pin A routed to IRQ 23
>       Region 0: Memory at f423d000 (32-bit, non-prefetchable) [size=1K]
>       Capabilities: <access denied>
>       Kernel driver in use: ehci-pci
> 
> 00:1f.0 ISA bridge: Intel Corporation Wildcat Point-LP LPC Controller (rev 03)
>       Subsystem: Lenovo Wildcat Point-LP LPC Controller
>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx-
>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>       Latency: 0
>       Capabilities: <access denied>
>       Kernel driver in use: lpc_ich
>       Kernel modules: lpc_ich
> 
> 00:1f.2 SATA controller: Intel Corporation Wildcat Point-LP SATA Controller 
> [AHCI Mode] (rev 03) (prog-if 01 [AHCI 1.0])
>       Subsystem: Lenovo Wildcat Point-LP SATA Controller [AHCI Mode]
>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx-
>       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>       Latency: 0
>       Interrupt: pin B routed to IRQ 19
>       Region 0: I/O ports at 40a8 [size=8]
>       Region 1: I/O ports at 40b4 [size=4]
>       Region 2: I/O ports at 40a0 [size=8]
>       Region 3: I/O ports at 40b0 [size=4]
>       Region 4: I/O ports at 4060 [size=32]
>       Region 5: Memory at f423c000 (32-bit, non-prefetchable) [size=2K]
>       Capabilities: <access denied>
>       Kernel driver in use: ahci
>       Kernel modules: ahci
> 
> 00:1f.3 SMBus: Intel Corporation Wildcat Point-LP SMBus Controller (rev 03)
>       Subsystem: Lenovo Wildcat Point-LP SMBus Controller
>       Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx-
>       Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>       Interrupt: pin C routed to IRQ 10
>       Region 0: Memory at f4238000 (64-bit, non-prefetchable) [size=256]
>       Region 4: I/O ports at efa0 [size=32]
>       Kernel modules: i2c_i801
> 
> 00:1f.6 Signal processing controller: Intel Corporation Wildcat Point-LP 
> Thermal Management Controller (rev 03)
>       Subsystem: Lenovo Wildcat Point-LP Thermal Management Controller
>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx-
>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx-
>       Latency: 0
>       Interrupt: pin C routed to IRQ 18
>       Region 0: Memory at f423b000 (64-bit, non-prefetchable) [size=4K]
>       Capabilities: <access denied>
>       Kernel driver in use: intel_pch_thermal
>       Kernel modules: intel_pch_thermal
> 
> 02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI 
> Express Card Reader (rev 01)
>       Subsystem: Lenovo RTS5227 PCI Express Card Reader
>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx+
>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx-
>       Latency: 0, Cache Line Size: 64 bytes
>       Interrupt: pin A routed to IRQ 44
>       Region 0: Memory at f4100000 (32-bit, non-prefetchable) [size=4K]
>       Capabilities: <access denied>
>       Kernel driver in use: rtsx_pci
>       Kernel modules: rtsx_pci
> 
> 03:00.0 Network controller: Intel Corporation Wireless 7265 (rev 99)
>       Subsystem: Intel Corporation Dual Band Wireless-AC 7265
>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx+
>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx-
>       Latency: 0, Cache Line Size: 64 bytes
>       Interrupt: pin A routed to IRQ 48
>       Region 0: Memory at f4000000 (64-bit, non-prefetchable) [size=8K]
>       Capabilities: <access denied>
>       Kernel driver in use: iwlwifi
>       Kernel modules: iwlwifi
> 
> 08:00.0 3D controller: NVIDIA Corporation GM108GLM [Quadro K620M] (rev a2)
>       Subsystem: Lenovo GM108GLM [Quadro K620M]
>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx+
>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx-
>       Latency: 0, Cache Line Size: 64 bytes
>       Interrupt: pin A routed to IRQ 45
>       Region 0: Memory at f3000000 (32-bit, non-prefetchable) [size=16M]
>       Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
>       Region 3: Memory at f0000000 (64-bit, prefetchable) [size=32M]
>       Region 5: I/O ports at 3000 [size=128]
>       Expansion ROM at <ignored> [disabled]
>       Capabilities: <access denied>
>       Kernel driver in use: nouveau
>       Kernel modules: nvidiafb, nouveau
> 

> dmesg |egrep -i "nouveau|nvidia"
> [    1.893467] nouveau: detected PR support, will not use DSM
> [    1.893677] nouveau 0000:08:00.0: NVIDIA GM108 (1183a0a2)
> [    1.907342] nouveau 0000:08:00.0: bios: version 82.08.1f.00.03
> [    1.991211] nouveau 0000:08:00.0: priv: HUB0: 6013d4 badf573f (1d408200)
> [    1.991212] nouveau 0000:08:00.0: fb: 2048 MiB DDR3
> [    3.269352] nouveau 0000:08:00.0: DRM: VRAM: 2048 MiB
> [    3.269408] nouveau 0000:08:00.0: DRM: GART: 1048576 MiB
> [    3.269465] nouveau 0000:08:00.0: DRM: Pointer to TMDS table invalid
> [    3.269523] nouveau 0000:08:00.0: DRM: DCB version 4.0
> [    3.269579] nouveau 0000:08:00.0: DRM: Pointer to flat panel table invalid
> [    3.451054] nouveau 0000:08:00.0: DRM: MM: using COPY for buffer copies
> [    3.451117] [drm] Initialized nouveau 1.3.1 20120801 for 0000:08:00.0 on 
> minor 0
> [    8.925115] nouveau 0000:08:00.0: DRM: evicting buffers...
> [    8.925189] nouveau 0000:08:00.0: DRM: waiting for kernel channels to go 
> idle...
> [    8.925283] nouveau 0000:08:00.0: DRM: suspending client object trees...
> [    8.929091] nouveau 0000:08:00.0: DRM: suspending kernel object tree...
> [   17.449259]  hid_logitech_hidpp hid_logitech_dj usbhid hid 
> crct10dif_pclmul rtsx_pci_sdmmc crc32_pclmul crc32c_intel mmc_core nouveau 
> ghash_clmulni_intel aesni_intel mxm_wmi i2c_algo_bit aes_x86_64 ttm lrw 
> gf128mul glue_helper drm_kms_helper ablk_helper cryptd syscopyarea 
> sysfillrect psmouse sysimgblt fb_sys_fops drm ahci libahci rtsx_pci e1000e 
> ptp pps_core thermal wmi fjes video button
> [   18.641499] nouveau 0000:08:00.0: DRM: resuming kernel object tree...
> [   18.724503] nouveau 0000:08:00.0: priv: HUB0: 6013d4 badf573f (1f408200)
> [   18.761491] nouveau 0000:08:00.0: priv: HUB0: 10ecc0 ffffffff (1d40822c)
> [   18.761992] nouveau 0000:08:00.0: DRM: resuming client object trees...
> [   26.025637] nouveau 0000:08:00.0: DRM: evicting buffers...
> [   26.025639] nouveau 0000:08:00.0: DRM: waiting for kernel channels to go 
> idle...
> [   26.025662] nouveau 0000:08:00.0: DRM: suspending client object trees...
> [   26.029451] nouveau 0000:08:00.0: DRM: suspending kernel object tree...

> [    20.874] 
> X.Org X Server 1.18.4
> Release Date: 2016-07-19
> [    20.874] X Protocol Version 11, Revision 0
> [    20.874] Build Operating System: Linux 3.13.0-95-generic x86_64 Ubuntu
> [    20.874] Current Operating System: Linux dell-smo 4.9.0-040900rc1-generic 
> #201610151630 SMP Sat Oct 15 20:33:39 UTC 2016 x86_64
> [    20.874] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.0-040900rc1-generic 
> root=UUID=a9421b5e-ff3f-4ebd-8f9f-13d24c76ba34 ro 
> cryptopts=target=sda6_crypt,source=/dev/disk/by-uuid/64096e82-f7f4-4917-80df-e123aa15a022,discard
>  vt.handoff=7
> [    20.874] Build Date: 14 September 2016  03:33:24PM
> [    20.874] xorg-server 2:1.18.4-0ubuntu0.1 (For technical support please 
> see http://www.ubuntu.com/support) 
> [    20.874] Current version of pixman: 0.33.6
> [    20.874]  Before reporting problems, check http://wiki.x.org
>       to make sure that you have the latest version.
> [    20.874] Markers: (--) probed, (**) from config file, (==) default 
> setting,
>       (++) from command line, (!!) notice, (II) informational,
>       (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> [    20.874] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 18 09:21:13 
> 2016
> [    20.877] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
> [    20.881] (==) No Layout section.  Using the first Screen section.
> [    20.881] (==) No screen section available. Using defaults.
> [    20.881] (**) |-->Screen "Default Screen Section" (0)
> [    20.881] (**) |   |-->Monitor "<default monitor>"
> [    20.882] (==) No monitor specified for screen "Default Screen Section".
>       Using a default monitor configuration.
> [    20.882] (==) Automatically adding devices
> [    20.882] (==) Automatically enabling devices
> [    20.882] (==) Automatically adding GPU devices
> [    20.882] (==) Max clients allowed: 256, resource mask: 0x1fffff
> [    20.889] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not 
> exist.
> [    20.889]  Entry deleted from font path.
> [    20.892] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
> [    20.892]  Entry deleted from font path.
> [    20.893] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
> [    20.893]  Entry deleted from font path.
> [    20.893] (==) FontPath set to:
>       /usr/share/fonts/X11/misc,
>       /usr/share/fonts/X11/100dpi/:unscaled,
>       /usr/share/fonts/X11/Type1,
>       /usr/share/fonts/X11/100dpi,
>       built-ins
> [    20.893] (==) ModulePath set to 
> "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
> [    20.893] (II) The server relies on udev to provide the list of input 
> devices.
>       If no devices become available, reconfigure udev or disable 
> AutoAddDevices.
> [    20.894] (II) Loader magic: 0x563366d65dc0
> [    20.894] (II) Module ABI versions:
> [    20.894]  X.Org ANSI C Emulation: 0.4
> [    20.894]  X.Org Video Driver: 20.0
> [    20.894]  X.Org XInput driver : 22.1
> [    20.894]  X.Org Server Extension : 9.0
> [    20.895] (++) using VT number 7
> 
> [    20.895] (II) systemd-logind: logind integration requires -keeptty and 
> -keeptty was not provided, disabling logind integration
> [    20.895] (II) xfree86: Adding drm device (/dev/dri/card1)
> [    20.910] (II) xfree86: Adding drm device (/dev/dri/card0)
> [    20.912] (--) PCI:*(0:0:2:0) 8086:1616:17aa:2225 rev 9, Mem @ 
> 0xf2000000/16777216, 0xc0000000/536870912, I/O @ 0x00004000/64, BIOS @ 
> 0x????????/131072
> [    20.912] (--) PCI: (0:8:0:0) 10de:137a:17aa:2225 rev 162, Mem @ 
> 0xf3000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 
> 0x00003000/128
> [    20.912] (II) LoadModule: "glx"
> [    20.936] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
> [    20.980] (II) Module glx: vendor="X.Org Foundation"
> [    20.980]  compiled for 1.18.4, module version = 1.0.0
> [    20.980]  ABI class: X.Org Server Extension, version 9.0
> [    20.980] (==) AIGLX enabled
> [    20.980] (==) Matched intel as autoconfigured driver 0
> [    20.980] (==) Matched nvidia as autoconfigured driver 1
> [    20.980] (==) Matched nouveau as autoconfigured driver 2
> [    20.980] (==) Matched intel as autoconfigured driver 3
> [    20.980] (==) Matched modesetting as autoconfigured driver 4
> [    20.980] (==) Matched fbdev as autoconfigured driver 5
> [    20.980] (==) Matched vesa as autoconfigured driver 6
> [    20.980] (==) Assigned the driver to the xf86ConfigLayout
> [    20.980] (II) LoadModule: "intel"
> [    20.983] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
> [    20.988] (II) Module intel: vendor="X.Org Foundation"
> [    20.988]  compiled for 1.18.4, module version = 2.99.917
> [    20.988]  Module class: X.Org Video Driver
> [    20.988]  ABI class: X.Org Video Driver, version 20.0
> [    20.988] (II) LoadModule: "nvidia"
> [    20.991] (WW) Warning, couldn't open module nvidia
> [    20.991] (II) UnloadModule: "nvidia"
> [    20.991] (II) Unloading nvidia
> [    20.991] (EE) Failed to load module "nvidia" (module does not exist, 0)
> [    20.991] (II) LoadModule: "nouveau"
> [    20.991] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
> [    20.994] (II) Module nouveau: vendor="X.Org Foundation"
> [    20.994]  compiled for 1.18.3, module version = 1.0.13
> [    20.994]  Module class: X.Org Video Driver
> [    20.994]  ABI class: X.Org Video Driver, version 20.0
> [    20.994] (II) LoadModule: "modesetting"
> [    20.994] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
> [    20.995] (II) Module modesetting: vendor="X.Org Foundation"
> [    20.995]  compiled for 1.18.4, module version = 1.18.4
> [    20.995]  Module class: X.Org Video Driver
> [    20.995]  ABI class: X.Org Video Driver, version 20.0
> [    20.995] (II) LoadModule: "fbdev"
> [    20.995] (WW) Warning, couldn't open module fbdev
> [    20.995] (II) UnloadModule: "fbdev"
> [    20.995] (II) Unloading fbdev
> [    20.995] (EE) Failed to load module "fbdev" (module does not exist, 0)
> [    20.995] (II) LoadModule: "vesa"
> [    20.995] (WW) Warning, couldn't open module vesa
> [    20.995] (II) UnloadModule: "vesa"
> [    20.995] (II) Unloading vesa
> [    20.995] (EE) Failed to load module "vesa" (module does not exist, 0)
> [    20.995] (==) Matched intel as autoconfigured driver 0
> [    20.995] (==) Matched nvidia as autoconfigured driver 1
> [    20.995] (==) Matched nouveau as autoconfigured driver 2
> [    20.995] (==) Matched intel as autoconfigured driver 3
> [    20.995] (==) Matched modesetting as autoconfigured driver 4
> [    20.995] (==) Matched fbdev as autoconfigured driver 5
> [    20.995] (==) Matched vesa as autoconfigured driver 6
> [    20.995] (==) Assigned the driver to the xf86ConfigLayout
> [    20.995] (II) LoadModule: "intel"
> [    20.996] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
> [    20.996] (II) Module intel: vendor="X.Org Foundation"
> [    20.996]  compiled for 1.18.4, module version = 2.99.917
> [    20.996]  Module class: X.Org Video Driver
> [    20.996]  ABI class: X.Org Video Driver, version 20.0
> [    20.996] (II) UnloadModule: "intel"
> [    20.996] (II) Unloading intel
> [    20.996] (II) Failed to load module "intel" (already loaded, 22067)
> [    20.996] (II) LoadModule: "nvidia"
> [    20.996] (WW) Warning, couldn't open module nvidia
> [    20.996] (II) UnloadModule: "nvidia"
> [    20.996] (II) Unloading nvidia
> [    20.996] (EE) Failed to load module "nvidia" (module does not exist, 0)
> [    20.996] (II) LoadModule: "nouveau"
> [    20.996] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
> [    20.996] (II) Module nouveau: vendor="X.Org Foundation"
> [    20.996]  compiled for 1.18.3, module version = 1.0.13
> [    20.996]  Module class: X.Org Video Driver
> [    20.996]  ABI class: X.Org Video Driver, version 20.0
> [    20.996] (II) UnloadModule: "nouveau"
> [    20.996] (II) Unloading nouveau
> [    20.996] (II) Failed to load module "nouveau" (already loaded, 0)
> [    20.996] (II) LoadModule: "modesetting"
> [    20.996] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
> [    20.996] (II) Module modesetting: vendor="X.Org Foundation"
> [    20.996]  compiled for 1.18.4, module version = 1.18.4
> [    20.996]  Module class: X.Org Video Driver
> [    20.996]  ABI class: X.Org Video Driver, version 20.0
> [    20.996] (II) UnloadModule: "modesetting"
> [    20.996] (II) Unloading modesetting
> [    20.996] (II) Failed to load module "modesetting" (already loaded, 0)
> [    20.996] (II) LoadModule: "fbdev"
> [    20.996] (WW) Warning, couldn't open module fbdev
> [    20.996] (II) UnloadModule: "fbdev"
> [    20.996] (II) Unloading fbdev
> [    20.996] (EE) Failed to load module "fbdev" (module does not exist, 0)
> [    20.996] (II) LoadModule: "vesa"
> [    20.997] (WW) Warning, couldn't open module vesa
> [    20.997] (II) UnloadModule: "vesa"
> [    20.997] (II) Unloading vesa
> [    20.997] (EE) Failed to load module "vesa" (module does not exist, 0)
> [    20.997] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
>       i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
>       915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
>       Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
>       GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
> [    20.997] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
> [    20.997] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
> [    20.997] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 
> 6200, P6300
> [    20.997] (II) NOUVEAU driver 
> [    20.997] (II) NOUVEAU driver for NVIDIA chipset families :
> [    20.997]  RIVA TNT        (NV04)
> [    20.997]  RIVA TNT2       (NV05)
> [    20.997]  GeForce 256     (NV10)
> [    20.997]  GeForce 2       (NV11, NV15)
> [    20.997]  GeForce 4MX     (NV17, NV18)
> [    20.997]  GeForce 3       (NV20)
> [    20.997]  GeForce 4Ti     (NV25, NV28)
> [    20.997]  GeForce FX      (NV3x)
> [    20.997]  GeForce 6       (NV4x)
> [    20.997]  GeForce 7       (G7x)
> [    20.997]  GeForce 8       (G8x)
> [    20.997]  GeForce GTX 200 (NVA0)
> [    20.997]  GeForce GTX 400 (NVC0)
> [    20.997] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
> [    21.020] (II) intel(0): Using Kernel Mode Setting driver: i915, version 
> 1.6.0 20160919
> [    21.020] (II) intel(0): SNA compiled: xserver-xorg-video-intel 
> 2:2.99.917+git1610121931.eb01cc~gd~x (Oibaf <fmrum...@gmail.com>)
> [    21.020] (II) intel(0): SNA compiled for use with valgrind
> [    21.022] (II) [drm] nouveau interface version: 1.3.1
> [    21.022] (EE) Unknown chipset: NV118
> [    21.022] (WW) Falling back to old probe method for modesetting
> [    21.024] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 
> 5500
> [    21.024] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, 
> avx, avx2; using a maximum of 2 threads
> [    21.024] (II) intel(0): Creating default Display subsection in Screen 
> section
>       "Default Screen Section" for depth/fbbpp 24/32
> [    21.024] (==) intel(0): Depth 24, (--) framebuffer bpp 32
> [    21.024] (==) intel(0): RGB weight 888
> [    21.024] (==) intel(0): Default visual is TrueColor
> [    21.024] (II) intel(0): Output eDP1 has no monitor section
> [    21.052] (--) intel(0): Found backlight control interface intel_backlight 
> (type 'raw') for output eDP1
> [    21.052] (II) intel(0): Enabled output eDP1
> [    21.052] (II) intel(0): Output DP1 has no monitor section
> [    21.052] (II) intel(0): Enabled output DP1
> [    21.052] (II) intel(0): Output HDMI1 has no monitor section
> [    21.052] (II) intel(0): Enabled output HDMI1
> [    21.052] (II) intel(0): Output DP2 has no monitor section
> [    21.052] (II) intel(0): Enabled output DP2
> [    21.052] (II) intel(0): Output HDMI2 has no monitor section
> [    21.052] (II) intel(0): Enabled output HDMI2
> [    21.052] (--) intel(0): Using a maximum size of 256x256 for hardware 
> cursors
> [    21.052] (II) intel(0): Output VIRTUAL1 has no monitor section
> [    21.052] (II) intel(0): Enabled output VIRTUAL1
> [    21.052] (--) intel(0): Output eDP1 using initial mode 2880x1620 on pipe 0
> [    21.052] (--) intel(0): Output DP1 using initial mode 2560x1440 on pipe 1
> [    21.052] (==) intel(0): TearFree enabled
> [    21.052] (==) intel(0): DPI set to (96, 96)
> [    21.052] (II) Loading sub module "dri2"
> [    21.052] (II) LoadModule: "dri2"
> [    21.053] (II) Module "dri2" already built-in
> [    21.053] (II) Loading sub module "present"
> [    21.053] (II) LoadModule: "present"
> [    21.053] (II) Module "present" already built-in
> [    21.053] (==) Depth 24 pixmap format is 32 bpp
> [    21.058] (II) intel(0): SNA initialized with Broadwell (gen8) backend
> [    21.058] (==) intel(0): Backing store enabled
> [    21.058] (==) intel(0): Silken mouse enabled
> [    21.060] (II) intel(0): HW Cursor enabled
> [    21.060] (II) intel(0): RandR 1.2 enabled, ignore the following RandR 
> disabled message.
> [    21.061] (==) intel(0): DPMS enabled
> [    21.061] (==) intel(0): Display hotplug detection enabled
> [    21.061] (II) intel(0): [DRI2] Setup complete
> [    21.061] (II) intel(0): [DRI2]   DRI driver: i965
> [    21.061] (II) intel(0): [DRI2]   VDPAU driver: va_gl
> [    21.061] (II) intel(0): direct rendering: DRI2 enabled
> [    21.061] (II) intel(0): hardware support for Present enabled
> [    21.061] (--) RandR disabled
> [    21.067] (II) SELinux: Disabled on system
> [    21.115] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
> [    21.115] (II) AIGLX: enabled GLX_ARB_create_context
> [    21.115] (II) AIGLX: enabled GLX_ARB_create_context_profile
> [    21.115] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
> [    21.115] (II) AIGLX: enabled GLX_INTEL_swap_event
> [    21.115] (II) AIGLX: enabled GLX_SGI_swap_control and 
> GLX_MESA_swap_control
> [    21.115] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
> [    21.115] (II) AIGLX: enabled GLX_ARB_fbconfig_float
> [    21.115] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
> [    21.115] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
> [    21.115] (II) AIGLX: enabled GLX_ARB_create_context_robustness
> [    21.116] (II) AIGLX: Loaded and initialized i965
> [    21.116] (II) GLX: Initialized DRI2 GL provider for screen 0
> [    21.125] (II) intel(0): switch to mode 2880x1620@60.0 on eDP1 using pipe 
> 0, position (0, 0), rotation normal, reflection none
> [    21.126] (II) intel(0): switch to mode 2560x1440@60.0 on DP1 using pipe 
> 1, position (0, 0), rotation normal, reflection none
> [    21.127] (II) intel(0): Setting screen physical size to 762 x 428
> [    21.271] (II) config/udev: Adding input device Power Button 
> (/dev/input/event3)
> [    21.276] (**) Power Button: Applying InputClass "evdev keyboard catchall"
> [    21.276] (II) LoadModule: "evdev"
> [    21.276] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
> [    21.279] (II) Module evdev: vendor="X.Org Foundation"
> [    21.280]  compiled for 1.18.1, module version = 2.10.1
> [    21.280]  Module class: X.Org XInput Driver
> [    21.280]  ABI class: X.Org XInput driver, version 22.1
> [    21.280] (II) Using input driver 'evdev' for 'Power Button'
> [    21.280] (**) Power Button: always reports core events
> [    21.280] (**) evdev: Power Button: Device: "/dev/input/event3"
> [    21.280] (--) evdev: Power Button: Vendor 0 Product 0x1
> [    21.280] (--) evdev: Power Button: Found keys
> [    21.280] (II) evdev: Power Button: Configuring as keyboard
> [    21.280] (**) Option "config_info" 
> "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
> [    21.280] (II) XINPUT: Adding extended input device "Power Button" (type: 
> KEYBOARD, id 6)
> [    21.280] (**) Option "xkb_rules" "evdev"
> [    21.280] (**) Option "xkb_model" "pc105"
> [    21.280] (**) Option "xkb_layout" "dk"
> [    21.359] (II) config/udev: Adding input device Video Bus 
> (/dev/input/event15)
> [    21.359] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
> [    21.359] (II) Using input driver 'evdev' for 'Video Bus'
> [    21.359] (**) Video Bus: always reports core events
> [    21.359] (**) evdev: Video Bus: Device: "/dev/input/event15"
> [    21.359] (--) evdev: Video Bus: Vendor 0 Product 0x6
> [    21.359] (--) evdev: Video Bus: Found keys
> [    21.359] (II) evdev: Video Bus: Configuring as keyboard
> [    21.359] (**) Option "config_info" 
> "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16/event15"
> [    21.359] (II) XINPUT: Adding extended input device "Video Bus" (type: 
> KEYBOARD, id 7)
> [    21.359] (**) Option "xkb_rules" "evdev"
> [    21.359] (**) Option "xkb_model" "pc105"
> [    21.359] (**) Option "xkb_layout" "dk"
> [    21.359] (II) config/udev: Adding input device Video Bus 
> (/dev/input/event16)
> [    21.359] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
> [    21.361] (II) Using input driver 'evdev' for 'Video Bus'
> [    21.361] (**) Video Bus: always reports core events
> [    21.361] (**) evdev: Video Bus: Device: "/dev/input/event16"
> [    21.361] (--) evdev: Video Bus: Vendor 0 Product 0x6
> [    21.361] (--) evdev: Video Bus: Found keys
> [    21.361] (II) evdev: Video Bus: Configuring as keyboard
> [    21.361] (**) Option "config_info" 
> "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input17/event16"
> [    21.361] (II) XINPUT: Adding extended input device "Video Bus" (type: 
> KEYBOARD, id 8)
> [    21.361] (**) Option "xkb_rules" "evdev"
> [    21.361] (**) Option "xkb_model" "pc105"
> [    21.361] (**) Option "xkb_layout" "dk"
> [    21.362] (II) config/udev: Adding input device Lid Switch 
> (/dev/input/event1)
> [    21.362] (II) No input driver specified, ignoring this device.
> [    21.362] (II) This device may have been added with another device file.
> [    21.362] (II) config/udev: Adding input device Sleep Button 
> (/dev/input/event2)
> [    21.362] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
> [    21.362] (II) Using input driver 'evdev' for 'Sleep Button'
> [    21.362] (**) Sleep Button: always reports core events
> [    21.362] (**) evdev: Sleep Button: Device: "/dev/input/event2"
> [    21.362] (--) evdev: Sleep Button: Vendor 0 Product 0x3
> [    21.364] (--) evdev: Sleep Button: Found keys
> [    21.364] (II) evdev: Sleep Button: Configuring as keyboard
> [    21.364] (**) Option "config_info" 
> "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event2"
> [    21.364] (II) XINPUT: Adding extended input device "Sleep Button" (type: 
> KEYBOARD, id 9)
> [    21.364] (**) Option "xkb_rules" "evdev"
> [    21.364] (**) Option "xkb_model" "pc105"
> [    21.364] (**) Option "xkb_layout" "dk"
> [    21.365] (II) config/udev: Adding input device HDA Intel HDMI 
> HDMI/DP,pcm=3 (/dev/input/event18)
> [    21.365] (II) No input driver specified, ignoring this device.
> [    21.365] (II) This device may have been added with another device file.
> [    21.365] (II) config/udev: Adding input device HDA Intel HDMI 
> HDMI/DP,pcm=7 (/dev/input/event19)
> [    21.365] (II) No input driver specified, ignoring this device.
> [    21.365] (II) This device may have been added with another device file.
> [    21.365] (II) config/udev: Adding input device HDA Intel HDMI 
> HDMI/DP,pcm=8 (/dev/input/event20)
> [    21.365] (II) No input driver specified, ignoring this device.
> [    21.365] (II) This device may have been added with another device file.
> [    21.366] (II) config/udev: Adding input device Logitech M705 
> (/dev/input/event4)
> [    21.366] (**) Logitech M705: Applying InputClass "evdev pointer catchall"
> [    21.366] (II) Using input driver 'evdev' for 'Logitech M705'
> [    21.366] (**) Logitech M705: always reports core events
> [    21.366] (**) evdev: Logitech M705: Device: "/dev/input/event4"
> [    21.366] (--) evdev: Logitech M705: Vendor 0x46d Product 0x101b
> [    21.366] (--) evdev: Logitech M705: Found 20 mouse buttons
> [    21.366] (--) evdev: Logitech M705: Found scroll wheel(s)
> [    21.366] (--) evdev: Logitech M705: Found relative axes
> [    21.366] (--) evdev: Logitech M705: Found x and y relative axes
> [    21.366] (II) evdev: Logitech M705: Configuring as mouse
> [    21.366] (II) evdev: Logitech M705: Adding scrollwheel support
> [    21.366] (**) evdev: Logitech M705: YAxisMapping: buttons 4 and 5
> [    21.366] (**) evdev: Logitech M705: EmulateWheelButton: 4, 
> EmulateWheelInertia: 10, EmulateWheelTimeout: 200
> [    21.366] (**) Option "config_info" 
> "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.2/0003:046D:C52B.0003/0003:046D:101B.0004/input/input6/event4"
> [    21.366] (II) XINPUT: Adding extended input device "Logitech M705" (type: 
> MOUSE, id 10)
> [    21.366] (II) evdev: Logitech M705: initialized for relative axes.
> [    21.366] (**) Logitech M705: (accel) keeping acceleration scheme 1
> [    21.366] (**) Logitech M705: (accel) acceleration profile 0
> [    21.366] (**) Logitech M705: (accel) acceleration factor: 2.000
> [    21.366] (**) Logitech M705: (accel) acceleration threshold: 4
> [    21.367] (II) config/udev: Adding input device Logitech M705 
> (/dev/input/mouse0)
> [    21.367] (II) No input driver specified, ignoring this device.
> [    21.367] (II) This device may have been added with another device file.
> [    21.367] (II) config/udev: Adding input device Lite-On Technology USB 
> Productivity Option Keyboard( has the hub in # 1 ) (/dev/input/event6)
> [    21.367] (**) Lite-On Technology USB Productivity Option Keyboard( has 
> the hub in # 1 ): Applying InputClass "evdev keyboard catchall"
> [    21.367] (II) Using input driver 'evdev' for 'Lite-On Technology USB 
> Productivity Option Keyboard( has the hub in # 1 )'
> [    21.367] (**) Lite-On Technology USB Productivity Option Keyboard( has 
> the hub in # 1 ): always reports core events
> [    21.367] (**) evdev: Lite-On Technology USB Productivity Option Keyboard( 
> has the hub in # 1 ): Device: "/dev/input/event6"
> [    21.367] (--) evdev: Lite-On Technology USB Productivity Option Keyboard( 
> has the hub in # 1 ): Vendor 0x4b3 Product 0x301b
> [    21.367] (--) evdev: Lite-On Technology USB Productivity Option Keyboard( 
> has the hub in # 1 ): Found keys
> [    21.367] (II) evdev: Lite-On Technology USB Productivity Option Keyboard( 
> has the hub in # 1 ): Configuring as keyboard
> [    21.367] (**) Option "config_info" 
> "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.2/2-2.2.1/2-2.2.1:1.0/0003:04B3:301B.0005/input/input8/event6"
> [    21.367] (II) XINPUT: Adding extended input device "Lite-On Technology 
> USB Productivity Option Keyboard( has the hub in # 1 )" (type: KEYBOARD, id 
> 11)
> [    21.367] (**) Option "xkb_rules" "evdev"
> [    21.367] (**) Option "xkb_model" "pc105"
> [    21.367] (**) Option "xkb_layout" "dk"
> [    21.368] (II) config/udev: Adding input device Lite-On Technology USB 
> Productivity Option Keyboard( has the hub in # 1 ) (/dev/input/event7)
> [    21.368] (**) Lite-On Technology USB Productivity Option Keyboard( has 
> the hub in # 1 ): Applying InputClass "evdev keyboard catchall"
> [    21.368] (II) Using input driver 'evdev' for 'Lite-On Technology USB 
> Productivity Option Keyboard( has the hub in # 1 )'
> [    21.368] (**) Lite-On Technology USB Productivity Option Keyboard( has 
> the hub in # 1 ): always reports core events
> [    21.368] (**) evdev: Lite-On Technology USB Productivity Option Keyboard( 
> has the hub in # 1 ): Device: "/dev/input/event7"
> [    21.368] (--) evdev: Lite-On Technology USB Productivity Option Keyboard( 
> has the hub in # 1 ): Vendor 0x4b3 Product 0x301b
> [    21.368] (--) evdev: Lite-On Technology USB Productivity Option Keyboard( 
> has the hub in # 1 ): Found keys
> [    21.368] (II) evdev: Lite-On Technology USB Productivity Option Keyboard( 
> has the hub in # 1 ): Configuring as keyboard
> [    21.368] (**) Option "config_info" 
> "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.2/2-2.2.1/2-2.2.1:1.1/0003:04B3:301B.0006/input/input9/event7"
> [    21.368] (II) XINPUT: Adding extended input device "Lite-On Technology 
> USB Productivity Option Keyboard( has the hub in # 1 )" (type: KEYBOARD, id 
> 12)
> [    21.368] (**) Option "xkb_rules" "evdev"
> [    21.368] (**) Option "xkb_model" "pc105"
> [    21.368] (**) Option "xkb_layout" "dk"
> [    21.369] (II) config/udev: Adding input device Integrated Camera 
> (/dev/input/event17)
> [    21.369] (**) Integrated Camera: Applying InputClass "evdev keyboard 
> catchall"
> [    21.369] (II) Using input driver 'evdev' for 'Integrated Camera'
> [    21.369] (**) Integrated Camera: always reports core events
> [    21.369] (**) evdev: Integrated Camera: Device: "/dev/input/event17"
> [    21.369] (--) evdev: Integrated Camera: Vendor 0x5986 Product 0x366
> [    21.369] (--) evdev: Integrated Camera: Found keys
> [    21.369] (II) evdev: Integrated Camera: Configuring as keyboard
> [    21.369] (**) Option "config_info" 
> "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input18/event17"
> [    21.369] (II) XINPUT: Adding extended input device "Integrated Camera" 
> (type: KEYBOARD, id 13)
> [    21.369] (**) Option "xkb_rules" "evdev"
> [    21.369] (**) Option "xkb_model" "pc105"
> [    21.369] (**) Option "xkb_layout" "dk"
> [    21.370] (II) config/udev: Adding input device HDA Digital PCBeep 
> (/dev/input/event10)
> [    21.370] (II) No input driver specified, ignoring this device.
> [    21.370] (II) This device may have been added with another device file.
> [    21.370] (II) config/udev: Adding input device HDA Intel PCH Dock Mic 
> (/dev/input/event11)
> [    21.370] (II) No input driver specified, ignoring this device.
> [    21.370] (II) This device may have been added with another device file.
> [    21.370] (II) config/udev: Adding input device HDA Intel PCH Mic 
> (/dev/input/event12)
> [    21.370] (II) No input driver specified, ignoring this device.
> [    21.370] (II) This device may have been added with another device file.
> [    21.370] (II) config/udev: Adding input device HDA Intel PCH Dock 
> Headphone (/dev/input/event13)
> [    21.370] (II) No input driver specified, ignoring this device.
> [    21.370] (II) This device may have been added with another device file.
> [    21.375] (II) config/udev: Adding input device HDA Intel PCH Headphone 
> (/dev/input/event14)
> [    21.375] (II) No input driver specified, ignoring this device.
> [    21.375] (II) This device may have been added with another device file.
> [    21.375] (II) config/udev: Adding input device AT Translated Set 2 
> keyboard (/dev/input/event0)
> [    21.375] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev 
> keyboard catchall"
> [    21.375] (II) Using input driver 'evdev' for 'AT Translated Set 2 
> keyboard'
> [    21.375] (**) AT Translated Set 2 keyboard: always reports core events
> [    21.375] (**) evdev: AT Translated Set 2 keyboard: Device: 
> "/dev/input/event0"
> [    21.375] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
> [    21.375] (--) evdev: AT Translated Set 2 keyboard: Found keys
> [    21.375] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
> [    21.375] (**) Option "config_info" 
> "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
> [    21.375] (II) XINPUT: Adding extended input device "AT Translated Set 2 
> keyboard" (type: KEYBOARD, id 14)
> [    21.375] (**) Option "xkb_rules" "evdev"
> [    21.375] (**) Option "xkb_model" "pc105"
> [    21.375] (**) Option "xkb_layout" "dk"
> [    21.376] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad 
> (/dev/input/event5)
> [    21.376] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev 
> touchpad catchall"
> [    21.376] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev 
> touchscreen catchall"
> [    21.376] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad 
> catchall"
> [    21.376] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default 
> clickpad buttons"
> [    21.376] (II) LoadModule: "synaptics"
> [    21.376] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
> [    21.381] (II) Module synaptics: vendor="X.Org Foundation"
> [    21.381]  compiled for 1.18.1, module version = 1.8.2
> [    21.381]  Module class: X.Org XInput Driver
> [    21.381]  ABI class: X.Org XInput driver, version 22.1
> [    21.381] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics 
> TouchPad'
> [    21.381] (**) SynPS/2 Synaptics TouchPad: always reports core events
> [    21.381] (**) Option "Device" "/dev/input/event5"
> [    21.464] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad 
> property
> [    21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1266 - 
> 5676 (res 45)
> [    21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1096 - 
> 4758 (res 68)
> [    21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 
> 255
> [    21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 
> - 15
> [    21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double 
> triple
> [    21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 
> 0x7
> [    21.464] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
> [    21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
> [    21.464] (**) SynPS/2 Synaptics TouchPad: always reports core events
> [    21.500] (**) Option "config_info" 
> "udev:/sys/devices/platform/i8042/serio1/input/input5/event5"
> [    21.500] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics 
> TouchPad" (type: TOUCHPAD, id 15)
> [    21.500] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is 
> now constant deceleration 2.5
> [    21.500] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is 
> now 1.75
> [    21.500] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor 
> is now 0.035
> [    21.500] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration 
> scheme 1
> [    21.500] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
> [    21.500] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 
> 2.000
> [    21.500] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 
> 4
> [    21.500] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
> [    21.500] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad 
> (/dev/input/mouse1)
> [    21.500] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass 
> "touchpad ignore duplicates"
> [    21.501] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint 
> (/dev/input/event8)
> [    21.501] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer 
> catchall"
> [    21.501] (**) TPPS/2 IBM TrackPoint: Applying InputClass "trackpoint 
> catchall"
> [    21.501] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
> [    21.501] (**) TPPS/2 IBM TrackPoint: always reports core events
> [    21.501] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event8"
> [    21.501] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
> [    21.501] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
> [    21.501] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
> [    21.501] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
> [    21.501] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
> [    21.501] (**) Option "Emulate3Buttons" "true"
> [    21.501] (**) Option "EmulateWheel" "true"
> [    21.501] (**) Option "EmulateWheelButton" "2"
> [    21.501] (**) Option "YAxisMapping" "4 5"
> [    21.501] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
> [    21.501] (**) Option "XAxisMapping" "6 7"
> [    21.501] (**) evdev: TPPS/2 IBM TrackPoint: XAxisMapping: buttons 6 and 7
> [    21.501] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 2, 
> EmulateWheelInertia: 10, EmulateWheelTimeout: 200
> [    21.501] (**) Option "config_info" 
> "udev:/sys/devices/platform/i8042/serio1/serio2/input/input7/event8"
> [    21.501] (II) XINPUT: Adding extended input device "TPPS/2 IBM 
> TrackPoint" (type: MOUSE, id 16)
> [    21.501] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
> [    21.501] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
> [    21.501] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
> [    21.501] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
> [    21.501] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
> [    21.501] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint 
> (/dev/input/mouse2)
> [    21.501] (II) No input driver specified, ignoring this device.
> [    21.501] (II) This device may have been added with another device file.
> [    21.502] (II) config/udev: Adding input device ThinkPad Extra Buttons 
> (/dev/input/event9)
> [    21.502] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard 
> catchall"
> [    21.502] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
> [    21.502] (**) ThinkPad Extra Buttons: always reports core events
> [    21.502] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event9"
> [    21.502] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
> [    21.502] (--) evdev: ThinkPad Extra Buttons: Found keys
> [    21.502] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
> [    21.502] (**) Option "config_info" 
> "udev:/sys/devices/platform/thinkpad_acpi/input/input10/event9"
> [    21.502] (II) XINPUT: Adding extended input device "ThinkPad Extra 
> Buttons" (type: KEYBOARD, id 17)
> [    21.502] (**) Option "xkb_rules" "evdev"
> [    21.502] (**) Option "xkb_model" "pc105"
> [    21.502] (**) Option "xkb_layout" "dk"
> [    23.053] (II) intel(0): EDID vendor "MEI", prod id 38562
> [    23.053] (II) intel(0):     EDID quirk: Use maximum size instead of 
> detailed timing sizes.
> [    23.053] (II) intel(0): Using EDID range info for horizontal sync
> [    23.053] (II) intel(0): Using EDID range info for vertical refresh
> [    23.053] (II) intel(0): Printing DDC gathered Modelines:
> [    23.053] (II) intel(0): Modeline "2880x1620"x0.0  302.50  2880 2924 2928 
> 3076  1620 1629 1630 1640 +hsync +vsync (98.3 kHz eP)
> [    23.053] (II) intel(0): Modeline "2880x1620"x0.0  302.50  2880 2924 2928 
> 3076  1620 1629 1630 1967 +hsync +vsync (98.3 kHz e)
> [    23.909] (II) intel(0): resizing framebuffer to 5440x1620
> [    23.960] (II) intel(0): switch to mode 2560x1440@60.0 on DP1 using pipe 
> 1, position (2880, 0), rotation normal, reflection none





> _______________________________________________
> Nouveau mailing list
> Nouveau@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/nouveau

Attachment: signature.asc
Description: PGP signature

_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau

Reply via email to