Hi again, It works :-)
Reclocking, however, is another kettle of fish. Trying #echo 0f > /sys/kernel/debug/dri/0/pstate hangs X. Trying the same with no X running reveals: Dec 7 10:08:42 dell-smo kernel: [ 728.831020] nouveau 0000:08:00.0: clk: unable to find matching pll values a number of time as then soft lockup. Very much akin to https://people.freedesktop.org/~cbrill/dri-log/?channel=nouveau&date=2016-04-14 , actually, so what I gather from that is that I need to provide you guys with some info about the card, so which do you need, and how do I extract them? Best regards, Sune Mølgaard On 2016-10-27 11:06, Pierre Moreau wrote: > Hello, > > The idea was to use the modesetting DDX instead of Nouveau’s one for Maxwell+ > as EXA was [broken][1]. But you can give a try at Ilia’s [patches][2], which > fix the Nouveau DDX for GM10x and GM20x (I don’t think it has been tested on a > GM108 yet). > > Best regards, > Pierre Moreau > > [1]: > https://cgit.freedesktop.org/nouveau/xf86-video-nouveau/commit/?id=3e2e0faa2ee1cce9c1bb5c7ad80d0592460f3edc > [2]: https://github.com/imirkin/xf86-video-nouveau/ > > > On 11:29 am - Oct 18 2016, Sune Mølgaard wrote: >> Hi, >> >> It would seem like it (attachments are from 4.9-rc1, btw), but it >> doesn't look like there is any support in the Xorg driver. >> >> How can I help with that? >> >> Best regards, >> >> Sune Mølgaard >> Translucent ApS >> >> On 2016-04-22 09:33, Pierre Moreau wrote: >>> Hello, >>> >>> A patch was merged yesterday to recognise GM108 (see >>> https://github.com/skeggsb/nouveau/commit/3da1f2a19e5e8dc8d68a4400d9cca01c64ecd59e). >>> I guess it will make it into 4.7. >>> >>> Pierre >> > >> lspci -vvvv >> 00:00.0 Host bridge: Intel Corporation Broadwell-U Host Bridge -OPI (rev 09) >> Subsystem: Lenovo Broadwell-U Host Bridge -OPI >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- >> <MAbort+ >SERR- <PERR- INTx- >> Latency: 0 >> Capabilities: <access denied> >> Kernel driver in use: bdw_uncore >> >> 00:02.0 VGA compatible controller: Intel Corporation Broadwell-U Integrated >> Graphics (rev 09) (prog-if 00 [VGA controller]) >> Subsystem: Lenovo Broadwell-U Integrated Graphics >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- DisINTx+ >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- >> <MAbort- >SERR- <PERR- INTx- >> Latency: 0 >> Interrupt: pin A routed to IRQ 49 >> Region 0: Memory at f2000000 (64-bit, non-prefetchable) [size=16M] >> Region 2: Memory at c0000000 (64-bit, prefetchable) [size=512M] >> Region 4: I/O ports at 4000 [size=64] >> [virtual] Expansion ROM at 000c0000 [disabled] [size=128K] >> Capabilities: <access denied> >> Kernel driver in use: i915 >> Kernel modules: i915 >> >> 00:03.0 Audio device: Intel Corporation Broadwell-U Audio Controller (rev 09) >> Subsystem: Lenovo Broadwell-U Audio Controller >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- DisINTx+ >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- >> <MAbort- >SERR- <PERR- INTx- >> Latency: 0, Cache Line Size: 64 bytes >> Interrupt: pin A routed to IRQ 50 >> Region 0: Memory at f4230000 (64-bit, non-prefetchable) [size=16K] >> Capabilities: <access denied> >> Kernel driver in use: snd_hda_intel >> Kernel modules: snd_hda_intel >> >> 00:14.0 USB controller: Intel Corporation Wildcat Point-LP USB xHCI >> Controller (rev 03) (prog-if 30 [XHCI]) >> Subsystem: Lenovo Wildcat Point-LP USB xHCI Controller >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- DisINTx+ >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- INTx- >> Latency: 0 >> Interrupt: pin A routed to IRQ 42 >> Region 0: Memory at f4220000 (64-bit, non-prefetchable) [size=64K] >> Capabilities: <access denied> >> Kernel driver in use: xhci_hcd >> >> 00:16.0 Communication controller: Intel Corporation Wildcat Point-LP MEI >> Controller #1 (rev 03) >> Subsystem: Lenovo Wildcat Point-LP MEI Controller >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- DisINTx+ >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- >> <MAbort- >SERR- <PERR- INTx- >> Latency: 0 >> Interrupt: pin A routed to IRQ 46 >> Region 0: Memory at f4239000 (64-bit, non-prefetchable) [size=32] >> Capabilities: <access denied> >> Kernel driver in use: mei_me >> Kernel modules: mei_me >> >> 00:19.0 Ethernet controller: Intel Corporation Ethernet Connection (3) >> I218-V (rev 03) >> Subsystem: Lenovo Ethernet Connection (3) I218-V >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- DisINTx+ >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- >> <MAbort- >SERR- <PERR- INTx- >> Latency: 0 >> Interrupt: pin A routed to IRQ 43 >> Region 0: Memory at f4200000 (32-bit, non-prefetchable) [size=128K] >> Region 1: Memory at f423e000 (32-bit, non-prefetchable) [size=4K] >> Region 2: I/O ports at 4080 [size=32] >> Capabilities: <access denied> >> Kernel driver in use: e1000e >> Kernel modules: e1000e >> >> 00:1b.0 Audio device: Intel Corporation Wildcat Point-LP High Definition >> Audio Controller (rev 03) >> Subsystem: Lenovo Wildcat Point-LP High Definition Audio Controller >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- DisINTx+ >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- >> <MAbort- >SERR- <PERR- INTx- >> Latency: 32, Cache Line Size: 64 bytes >> Interrupt: pin A routed to IRQ 47 >> Region 0: Memory at f4234000 (64-bit, non-prefetchable) [size=16K] >> Capabilities: <access denied> >> Kernel driver in use: snd_hda_intel >> Kernel modules: snd_hda_intel >> >> 00:1c.0 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port >> #6 (rev e3) (prog-if 00 [Normal decode]) >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- >> <MAbort- >SERR- <PERR- INTx- >> Latency: 0, Cache Line Size: 64 bytes >> Interrupt: pin B routed to IRQ 17 >> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 >> I/O behind bridge: 0000f000-00000fff >> Memory behind bridge: f4100000-f41fffff >> Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff >> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- >> <MAbort+ <SERR- <PERR- >> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- >> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- >> Capabilities: <access denied> >> Kernel driver in use: pcieport >> Kernel modules: shpchp >> >> 00:1c.1 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port >> #3 (rev e3) (prog-if 00 [Normal decode]) >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- >> <MAbort- >SERR- <PERR- INTx- >> Latency: 0, Cache Line Size: 64 bytes >> Interrupt: pin C routed to IRQ 18 >> Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 >> I/O behind bridge: 0000f000-00000fff >> Memory behind bridge: f4000000-f40fffff >> Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff >> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- >> <MAbort+ <SERR- <PERR- >> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- >> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- >> Capabilities: <access denied> >> Kernel driver in use: pcieport >> Kernel modules: shpchp >> >> 00:1c.4 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port >> #5 (rev e3) (prog-if 00 [Normal decode]) >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- >> <MAbort- >SERR- <PERR- INTx- >> Latency: 0, Cache Line Size: 64 bytes >> Interrupt: pin A routed to IRQ 16 >> Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 >> I/O behind bridge: 00003000-00003fff >> Memory behind bridge: f3000000-f3ffffff >> Prefetchable memory behind bridge: 00000000e0000000-00000000f1ffffff >> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- >> <MAbort+ <SERR- <PERR- >> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- >> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- >> Capabilities: <access denied> >> Kernel driver in use: pcieport >> Kernel modules: shpchp >> >> 00:1d.0 USB controller: Intel Corporation Wildcat Point-LP USB EHCI >> Controller (rev 03) (prog-if 20 [EHCI]) >> Subsystem: Lenovo Wildcat Point-LP USB EHCI Controller >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- INTx- >> Latency: 0 >> Interrupt: pin A routed to IRQ 23 >> Region 0: Memory at f423d000 (32-bit, non-prefetchable) [size=1K] >> Capabilities: <access denied> >> Kernel driver in use: ehci-pci >> >> 00:1f.0 ISA bridge: Intel Corporation Wildcat Point-LP LPC Controller (rev >> 03) >> Subsystem: Lenovo Wildcat Point-LP LPC Controller >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- INTx- >> Latency: 0 >> Capabilities: <access denied> >> Kernel driver in use: lpc_ich >> Kernel modules: lpc_ich >> >> 00:1f.2 SATA controller: Intel Corporation Wildcat Point-LP SATA Controller >> [AHCI Mode] (rev 03) (prog-if 01 [AHCI 1.0]) >> Subsystem: Lenovo Wildcat Point-LP SATA Controller [AHCI Mode] >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- INTx- >> Latency: 0 >> Interrupt: pin B routed to IRQ 19 >> Region 0: I/O ports at 40a8 [size=8] >> Region 1: I/O ports at 40b4 [size=4] >> Region 2: I/O ports at 40a0 [size=8] >> Region 3: I/O ports at 40b0 [size=4] >> Region 4: I/O ports at 4060 [size=32] >> Region 5: Memory at f423c000 (32-bit, non-prefetchable) [size=2K] >> Capabilities: <access denied> >> Kernel driver in use: ahci >> Kernel modules: ahci >> >> 00:1f.3 SMBus: Intel Corporation Wildcat Point-LP SMBus Controller (rev 03) >> Subsystem: Lenovo Wildcat Point-LP SMBus Controller >> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- DisINTx- >> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- INTx- >> Interrupt: pin C routed to IRQ 10 >> Region 0: Memory at f4238000 (64-bit, non-prefetchable) [size=256] >> Region 4: I/O ports at efa0 [size=32] >> Kernel modules: i2c_i801 >> >> 00:1f.6 Signal processing controller: Intel Corporation Wildcat Point-LP >> Thermal Management Controller (rev 03) >> Subsystem: Lenovo Wildcat Point-LP Thermal Management Controller >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- >> <MAbort- >SERR- <PERR- INTx- >> Latency: 0 >> Interrupt: pin C routed to IRQ 18 >> Region 0: Memory at f423b000 (64-bit, non-prefetchable) [size=4K] >> Capabilities: <access denied> >> Kernel driver in use: intel_pch_thermal >> Kernel modules: intel_pch_thermal >> >> 02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI >> Express Card Reader (rev 01) >> Subsystem: Lenovo RTS5227 PCI Express Card Reader >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- DisINTx+ >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- >> <MAbort- >SERR- <PERR- INTx- >> Latency: 0, Cache Line Size: 64 bytes >> Interrupt: pin A routed to IRQ 44 >> Region 0: Memory at f4100000 (32-bit, non-prefetchable) [size=4K] >> Capabilities: <access denied> >> Kernel driver in use: rtsx_pci >> Kernel modules: rtsx_pci >> >> 03:00.0 Network controller: Intel Corporation Wireless 7265 (rev 99) >> Subsystem: Intel Corporation Dual Band Wireless-AC 7265 >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- DisINTx+ >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- >> <MAbort- >SERR- <PERR- INTx- >> Latency: 0, Cache Line Size: 64 bytes >> Interrupt: pin A routed to IRQ 48 >> Region 0: Memory at f4000000 (64-bit, non-prefetchable) [size=8K] >> Capabilities: <access denied> >> Kernel driver in use: iwlwifi >> Kernel modules: iwlwifi >> >> 08:00.0 3D controller: NVIDIA Corporation GM108GLM [Quadro K620M] (rev a2) >> Subsystem: Lenovo GM108GLM [Quadro K620M] >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- DisINTx+ >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- >> <MAbort- >SERR- <PERR- INTx- >> Latency: 0, Cache Line Size: 64 bytes >> Interrupt: pin A routed to IRQ 45 >> Region 0: Memory at f3000000 (32-bit, non-prefetchable) [size=16M] >> Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M] >> Region 3: Memory at f0000000 (64-bit, prefetchable) [size=32M] >> Region 5: I/O ports at 3000 [size=128] >> Expansion ROM at <ignored> [disabled] >> Capabilities: <access denied> >> Kernel driver in use: nouveau >> Kernel modules: nvidiafb, nouveau >> > >> dmesg |egrep -i "nouveau|nvidia" >> [ 1.893467] nouveau: detected PR support, will not use DSM >> [ 1.893677] nouveau 0000:08:00.0: NVIDIA GM108 (1183a0a2) >> [ 1.907342] nouveau 0000:08:00.0: bios: version 82.08.1f.00.03 >> [ 1.991211] nouveau 0000:08:00.0: priv: HUB0: 6013d4 badf573f (1d408200) >> [ 1.991212] nouveau 0000:08:00.0: fb: 2048 MiB DDR3 >> [ 3.269352] nouveau 0000:08:00.0: DRM: VRAM: 2048 MiB >> [ 3.269408] nouveau 0000:08:00.0: DRM: GART: 1048576 MiB >> [ 3.269465] nouveau 0000:08:00.0: DRM: Pointer to TMDS table invalid >> [ 3.269523] nouveau 0000:08:00.0: DRM: DCB version 4.0 >> [ 3.269579] nouveau 0000:08:00.0: DRM: Pointer to flat panel table invalid >> [ 3.451054] nouveau 0000:08:00.0: DRM: MM: using COPY for buffer copies >> [ 3.451117] [drm] Initialized nouveau 1.3.1 20120801 for 0000:08:00.0 on >> minor 0 >> [ 8.925115] nouveau 0000:08:00.0: DRM: evicting buffers... >> [ 8.925189] nouveau 0000:08:00.0: DRM: waiting for kernel channels to go >> idle... >> [ 8.925283] nouveau 0000:08:00.0: DRM: suspending client object trees... >> [ 8.929091] nouveau 0000:08:00.0: DRM: suspending kernel object tree... >> [ 17.449259] hid_logitech_hidpp hid_logitech_dj usbhid hid >> crct10dif_pclmul rtsx_pci_sdmmc crc32_pclmul crc32c_intel mmc_core nouveau >> ghash_clmulni_intel aesni_intel mxm_wmi i2c_algo_bit aes_x86_64 ttm lrw >> gf128mul glue_helper drm_kms_helper ablk_helper cryptd syscopyarea >> sysfillrect psmouse sysimgblt fb_sys_fops drm ahci libahci rtsx_pci e1000e >> ptp pps_core thermal wmi fjes video button >> [ 18.641499] nouveau 0000:08:00.0: DRM: resuming kernel object tree... >> [ 18.724503] nouveau 0000:08:00.0: priv: HUB0: 6013d4 badf573f (1f408200) >> [ 18.761491] nouveau 0000:08:00.0: priv: HUB0: 10ecc0 ffffffff (1d40822c) >> [ 18.761992] nouveau 0000:08:00.0: DRM: resuming client object trees... >> [ 26.025637] nouveau 0000:08:00.0: DRM: evicting buffers... >> [ 26.025639] nouveau 0000:08:00.0: DRM: waiting for kernel channels to go >> idle... >> [ 26.025662] nouveau 0000:08:00.0: DRM: suspending client object trees... >> [ 26.029451] nouveau 0000:08:00.0: DRM: suspending kernel object tree... > >> [ 20.874] >> X.Org X Server 1.18.4 >> Release Date: 2016-07-19 >> [ 20.874] X Protocol Version 11, Revision 0 >> [ 20.874] Build Operating System: Linux 3.13.0-95-generic x86_64 Ubuntu >> [ 20.874] Current Operating System: Linux dell-smo >> 4.9.0-040900rc1-generic #201610151630 SMP Sat Oct 15 20:33:39 UTC 2016 x86_64 >> [ 20.874] Kernel command line: >> BOOT_IMAGE=/vmlinuz-4.9.0-040900rc1-generic >> root=UUID=a9421b5e-ff3f-4ebd-8f9f-13d24c76ba34 ro >> cryptopts=target=sda6_crypt,source=/dev/disk/by-uuid/64096e82-f7f4-4917-80df-e123aa15a022,discard >> vt.handoff=7 >> [ 20.874] Build Date: 14 September 2016 03:33:24PM >> [ 20.874] xorg-server 2:1.18.4-0ubuntu0.1 (For technical support please >> see http://www.ubuntu.com/support) >> [ 20.874] Current version of pixman: 0.33.6 >> [ 20.874] Before reporting problems, check http://wiki.x.org >> to make sure that you have the latest version. >> [ 20.874] Markers: (--) probed, (**) from config file, (==) default >> setting, >> (++) from command line, (!!) notice, (II) informational, >> (WW) warning, (EE) error, (NI) not implemented, (??) unknown. >> [ 20.874] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 18 09:21:13 >> 2016 >> [ 20.877] (==) Using system config directory "/usr/share/X11/xorg.conf.d" >> [ 20.881] (==) No Layout section. Using the first Screen section. >> [ 20.881] (==) No screen section available. Using defaults. >> [ 20.881] (**) |-->Screen "Default Screen Section" (0) >> [ 20.881] (**) | |-->Monitor "<default monitor>" >> [ 20.882] (==) No monitor specified for screen "Default Screen Section". >> Using a default monitor configuration. >> [ 20.882] (==) Automatically adding devices >> [ 20.882] (==) Automatically enabling devices >> [ 20.882] (==) Automatically adding GPU devices >> [ 20.882] (==) Max clients allowed: 256, resource mask: 0x1fffff >> [ 20.889] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not >> exist. >> [ 20.889] Entry deleted from font path. >> [ 20.892] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. >> [ 20.892] Entry deleted from font path. >> [ 20.893] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. >> [ 20.893] Entry deleted from font path. >> [ 20.893] (==) FontPath set to: >> /usr/share/fonts/X11/misc, >> /usr/share/fonts/X11/100dpi/:unscaled, >> /usr/share/fonts/X11/Type1, >> /usr/share/fonts/X11/100dpi, >> built-ins >> [ 20.893] (==) ModulePath set to >> "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" >> [ 20.893] (II) The server relies on udev to provide the list of input >> devices. >> If no devices become available, reconfigure udev or disable >> AutoAddDevices. >> [ 20.894] (II) Loader magic: 0x563366d65dc0 >> [ 20.894] (II) Module ABI versions: >> [ 20.894] X.Org ANSI C Emulation: 0.4 >> [ 20.894] X.Org Video Driver: 20.0 >> [ 20.894] X.Org XInput driver : 22.1 >> [ 20.894] X.Org Server Extension : 9.0 >> [ 20.895] (++) using VT number 7 >> >> [ 20.895] (II) systemd-logind: logind integration requires -keeptty and >> -keeptty was not provided, disabling logind integration >> [ 20.895] (II) xfree86: Adding drm device (/dev/dri/card1) >> [ 20.910] (II) xfree86: Adding drm device (/dev/dri/card0) >> [ 20.912] (--) PCI:*(0:0:2:0) 8086:1616:17aa:2225 rev 9, Mem @ >> 0xf2000000/16777216, 0xc0000000/536870912, I/O @ 0x00004000/64, BIOS @ >> 0x????????/131072 >> [ 20.912] (--) PCI: (0:8:0:0) 10de:137a:17aa:2225 rev 162, Mem @ >> 0xf3000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ >> 0x00003000/128 >> [ 20.912] (II) LoadModule: "glx" >> [ 20.936] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so >> [ 20.980] (II) Module glx: vendor="X.Org Foundation" >> [ 20.980] compiled for 1.18.4, module version = 1.0.0 >> [ 20.980] ABI class: X.Org Server Extension, version 9.0 >> [ 20.980] (==) AIGLX enabled >> [ 20.980] (==) Matched intel as autoconfigured driver 0 >> [ 20.980] (==) Matched nvidia as autoconfigured driver 1 >> [ 20.980] (==) Matched nouveau as autoconfigured driver 2 >> [ 20.980] (==) Matched intel as autoconfigured driver 3 >> [ 20.980] (==) Matched modesetting as autoconfigured driver 4 >> [ 20.980] (==) Matched fbdev as autoconfigured driver 5 >> [ 20.980] (==) Matched vesa as autoconfigured driver 6 >> [ 20.980] (==) Assigned the driver to the xf86ConfigLayout >> [ 20.980] (II) LoadModule: "intel" >> [ 20.983] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so >> [ 20.988] (II) Module intel: vendor="X.Org Foundation" >> [ 20.988] compiled for 1.18.4, module version = 2.99.917 >> [ 20.988] Module class: X.Org Video Driver >> [ 20.988] ABI class: X.Org Video Driver, version 20.0 >> [ 20.988] (II) LoadModule: "nvidia" >> [ 20.991] (WW) Warning, couldn't open module nvidia >> [ 20.991] (II) UnloadModule: "nvidia" >> [ 20.991] (II) Unloading nvidia >> [ 20.991] (EE) Failed to load module "nvidia" (module does not exist, 0) >> [ 20.991] (II) LoadModule: "nouveau" >> [ 20.991] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so >> [ 20.994] (II) Module nouveau: vendor="X.Org Foundation" >> [ 20.994] compiled for 1.18.3, module version = 1.0.13 >> [ 20.994] Module class: X.Org Video Driver >> [ 20.994] ABI class: X.Org Video Driver, version 20.0 >> [ 20.994] (II) LoadModule: "modesetting" >> [ 20.994] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so >> [ 20.995] (II) Module modesetting: vendor="X.Org Foundation" >> [ 20.995] compiled for 1.18.4, module version = 1.18.4 >> [ 20.995] Module class: X.Org Video Driver >> [ 20.995] ABI class: X.Org Video Driver, version 20.0 >> [ 20.995] (II) LoadModule: "fbdev" >> [ 20.995] (WW) Warning, couldn't open module fbdev >> [ 20.995] (II) UnloadModule: "fbdev" >> [ 20.995] (II) Unloading fbdev >> [ 20.995] (EE) Failed to load module "fbdev" (module does not exist, 0) >> [ 20.995] (II) LoadModule: "vesa" >> [ 20.995] (WW) Warning, couldn't open module vesa >> [ 20.995] (II) UnloadModule: "vesa" >> [ 20.995] (II) Unloading vesa >> [ 20.995] (EE) Failed to load module "vesa" (module does not exist, 0) >> [ 20.995] (==) Matched intel as autoconfigured driver 0 >> [ 20.995] (==) Matched nvidia as autoconfigured driver 1 >> [ 20.995] (==) Matched nouveau as autoconfigured driver 2 >> [ 20.995] (==) Matched intel as autoconfigured driver 3 >> [ 20.995] (==) Matched modesetting as autoconfigured driver 4 >> [ 20.995] (==) Matched fbdev as autoconfigured driver 5 >> [ 20.995] (==) Matched vesa as autoconfigured driver 6 >> [ 20.995] (==) Assigned the driver to the xf86ConfigLayout >> [ 20.995] (II) LoadModule: "intel" >> [ 20.996] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so >> [ 20.996] (II) Module intel: vendor="X.Org Foundation" >> [ 20.996] compiled for 1.18.4, module version = 2.99.917 >> [ 20.996] Module class: X.Org Video Driver >> [ 20.996] ABI class: X.Org Video Driver, version 20.0 >> [ 20.996] (II) UnloadModule: "intel" >> [ 20.996] (II) Unloading intel >> [ 20.996] (II) Failed to load module "intel" (already loaded, 22067) >> [ 20.996] (II) LoadModule: "nvidia" >> [ 20.996] (WW) Warning, couldn't open module nvidia >> [ 20.996] (II) UnloadModule: "nvidia" >> [ 20.996] (II) Unloading nvidia >> [ 20.996] (EE) Failed to load module "nvidia" (module does not exist, 0) >> [ 20.996] (II) LoadModule: "nouveau" >> [ 20.996] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so >> [ 20.996] (II) Module nouveau: vendor="X.Org Foundation" >> [ 20.996] compiled for 1.18.3, module version = 1.0.13 >> [ 20.996] Module class: X.Org Video Driver >> [ 20.996] ABI class: X.Org Video Driver, version 20.0 >> [ 20.996] (II) UnloadModule: "nouveau" >> [ 20.996] (II) Unloading nouveau >> [ 20.996] (II) Failed to load module "nouveau" (already loaded, 0) >> [ 20.996] (II) LoadModule: "modesetting" >> [ 20.996] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so >> [ 20.996] (II) Module modesetting: vendor="X.Org Foundation" >> [ 20.996] compiled for 1.18.4, module version = 1.18.4 >> [ 20.996] Module class: X.Org Video Driver >> [ 20.996] ABI class: X.Org Video Driver, version 20.0 >> [ 20.996] (II) UnloadModule: "modesetting" >> [ 20.996] (II) Unloading modesetting >> [ 20.996] (II) Failed to load module "modesetting" (already loaded, 0) >> [ 20.996] (II) LoadModule: "fbdev" >> [ 20.996] (WW) Warning, couldn't open module fbdev >> [ 20.996] (II) UnloadModule: "fbdev" >> [ 20.996] (II) Unloading fbdev >> [ 20.996] (EE) Failed to load module "fbdev" (module does not exist, 0) >> [ 20.996] (II) LoadModule: "vesa" >> [ 20.997] (WW) Warning, couldn't open module vesa >> [ 20.997] (II) UnloadModule: "vesa" >> [ 20.997] (II) Unloading vesa >> [ 20.997] (EE) Failed to load module "vesa" (module does not exist, 0) >> [ 20.997] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: >> i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, >> 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, >> Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, >> GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 >> [ 20.997] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000 >> [ 20.997] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100 >> [ 20.997] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, >> 6200, P6300 >> [ 20.997] (II) NOUVEAU driver >> [ 20.997] (II) NOUVEAU driver for NVIDIA chipset families : >> [ 20.997] RIVA TNT (NV04) >> [ 20.997] RIVA TNT2 (NV05) >> [ 20.997] GeForce 256 (NV10) >> [ 20.997] GeForce 2 (NV11, NV15) >> [ 20.997] GeForce 4MX (NV17, NV18) >> [ 20.997] GeForce 3 (NV20) >> [ 20.997] GeForce 4Ti (NV25, NV28) >> [ 20.997] GeForce FX (NV3x) >> [ 20.997] GeForce 6 (NV4x) >> [ 20.997] GeForce 7 (G7x) >> [ 20.997] GeForce 8 (G8x) >> [ 20.997] GeForce GTX 200 (NVA0) >> [ 20.997] GeForce GTX 400 (NVC0) >> [ 20.997] (II) modesetting: Driver for Modesetting Kernel Drivers: kms >> [ 21.020] (II) intel(0): Using Kernel Mode Setting driver: i915, version >> 1.6.0 20160919 >> [ 21.020] (II) intel(0): SNA compiled: xserver-xorg-video-intel >> 2:2.99.917+git1610121931.eb01cc~gd~x (Oibaf <fmrum...@gmail.com>) >> [ 21.020] (II) intel(0): SNA compiled for use with valgrind >> [ 21.022] (II) [drm] nouveau interface version: 1.3.1 >> [ 21.022] (EE) Unknown chipset: NV118 >> [ 21.022] (WW) Falling back to old probe method for modesetting >> [ 21.024] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD >> Graphics 5500 >> [ 21.024] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, >> avx, avx2; using a maximum of 2 threads >> [ 21.024] (II) intel(0): Creating default Display subsection in Screen >> section >> "Default Screen Section" for depth/fbbpp 24/32 >> [ 21.024] (==) intel(0): Depth 24, (--) framebuffer bpp 32 >> [ 21.024] (==) intel(0): RGB weight 888 >> [ 21.024] (==) intel(0): Default visual is TrueColor >> [ 21.024] (II) intel(0): Output eDP1 has no monitor section >> [ 21.052] (--) intel(0): Found backlight control interface >> intel_backlight (type 'raw') for output eDP1 >> [ 21.052] (II) intel(0): Enabled output eDP1 >> [ 21.052] (II) intel(0): Output DP1 has no monitor section >> [ 21.052] (II) intel(0): Enabled output DP1 >> [ 21.052] (II) intel(0): Output HDMI1 has no monitor section >> [ 21.052] (II) intel(0): Enabled output HDMI1 >> [ 21.052] (II) intel(0): Output DP2 has no monitor section >> [ 21.052] (II) intel(0): Enabled output DP2 >> [ 21.052] (II) intel(0): Output HDMI2 has no monitor section >> [ 21.052] (II) intel(0): Enabled output HDMI2 >> [ 21.052] (--) intel(0): Using a maximum size of 256x256 for hardware >> cursors >> [ 21.052] (II) intel(0): Output VIRTUAL1 has no monitor section >> [ 21.052] (II) intel(0): Enabled output VIRTUAL1 >> [ 21.052] (--) intel(0): Output eDP1 using initial mode 2880x1620 on pipe >> 0 >> [ 21.052] (--) intel(0): Output DP1 using initial mode 2560x1440 on pipe 1 >> [ 21.052] (==) intel(0): TearFree enabled >> [ 21.052] (==) intel(0): DPI set to (96, 96) >> [ 21.052] (II) Loading sub module "dri2" >> [ 21.052] (II) LoadModule: "dri2" >> [ 21.053] (II) Module "dri2" already built-in >> [ 21.053] (II) Loading sub module "present" >> [ 21.053] (II) LoadModule: "present" >> [ 21.053] (II) Module "present" already built-in >> [ 21.053] (==) Depth 24 pixmap format is 32 bpp >> [ 21.058] (II) intel(0): SNA initialized with Broadwell (gen8) backend >> [ 21.058] (==) intel(0): Backing store enabled >> [ 21.058] (==) intel(0): Silken mouse enabled >> [ 21.060] (II) intel(0): HW Cursor enabled >> [ 21.060] (II) intel(0): RandR 1.2 enabled, ignore the following RandR >> disabled message. >> [ 21.061] (==) intel(0): DPMS enabled >> [ 21.061] (==) intel(0): Display hotplug detection enabled >> [ 21.061] (II) intel(0): [DRI2] Setup complete >> [ 21.061] (II) intel(0): [DRI2] DRI driver: i965 >> [ 21.061] (II) intel(0): [DRI2] VDPAU driver: va_gl >> [ 21.061] (II) intel(0): direct rendering: DRI2 enabled >> [ 21.061] (II) intel(0): hardware support for Present enabled >> [ 21.061] (--) RandR disabled >> [ 21.067] (II) SELinux: Disabled on system >> [ 21.115] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer >> [ 21.115] (II) AIGLX: enabled GLX_ARB_create_context >> [ 21.115] (II) AIGLX: enabled GLX_ARB_create_context_profile >> [ 21.115] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile >> [ 21.115] (II) AIGLX: enabled GLX_INTEL_swap_event >> [ 21.115] (II) AIGLX: enabled GLX_SGI_swap_control and >> GLX_MESA_swap_control >> [ 21.115] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB >> [ 21.115] (II) AIGLX: enabled GLX_ARB_fbconfig_float >> [ 21.115] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float >> [ 21.115] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects >> [ 21.115] (II) AIGLX: enabled GLX_ARB_create_context_robustness >> [ 21.116] (II) AIGLX: Loaded and initialized i965 >> [ 21.116] (II) GLX: Initialized DRI2 GL provider for screen 0 >> [ 21.125] (II) intel(0): switch to mode 2880x1620@60.0 on eDP1 using pipe >> 0, position (0, 0), rotation normal, reflection none >> [ 21.126] (II) intel(0): switch to mode 2560x1440@60.0 on DP1 using pipe >> 1, position (0, 0), rotation normal, reflection none >> [ 21.127] (II) intel(0): Setting screen physical size to 762 x 428 >> [ 21.271] (II) config/udev: Adding input device Power Button >> (/dev/input/event3) >> [ 21.276] (**) Power Button: Applying InputClass "evdev keyboard catchall" >> [ 21.276] (II) LoadModule: "evdev" >> [ 21.276] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so >> [ 21.279] (II) Module evdev: vendor="X.Org Foundation" >> [ 21.280] compiled for 1.18.1, module version = 2.10.1 >> [ 21.280] Module class: X.Org XInput Driver >> [ 21.280] ABI class: X.Org XInput driver, version 22.1 >> [ 21.280] (II) Using input driver 'evdev' for 'Power Button' >> [ 21.280] (**) Power Button: always reports core events >> [ 21.280] (**) evdev: Power Button: Device: "/dev/input/event3" >> [ 21.280] (--) evdev: Power Button: Vendor 0 Product 0x1 >> [ 21.280] (--) evdev: Power Button: Found keys >> [ 21.280] (II) evdev: Power Button: Configuring as keyboard >> [ 21.280] (**) Option "config_info" >> "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3" >> [ 21.280] (II) XINPUT: Adding extended input device "Power Button" (type: >> KEYBOARD, id 6) >> [ 21.280] (**) Option "xkb_rules" "evdev" >> [ 21.280] (**) Option "xkb_model" "pc105" >> [ 21.280] (**) Option "xkb_layout" "dk" >> [ 21.359] (II) config/udev: Adding input device Video Bus >> (/dev/input/event15) >> [ 21.359] (**) Video Bus: Applying InputClass "evdev keyboard catchall" >> [ 21.359] (II) Using input driver 'evdev' for 'Video Bus' >> [ 21.359] (**) Video Bus: always reports core events >> [ 21.359] (**) evdev: Video Bus: Device: "/dev/input/event15" >> [ 21.359] (--) evdev: Video Bus: Vendor 0 Product 0x6 >> [ 21.359] (--) evdev: Video Bus: Found keys >> [ 21.359] (II) evdev: Video Bus: Configuring as keyboard >> [ 21.359] (**) Option "config_info" >> "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16/event15" >> [ 21.359] (II) XINPUT: Adding extended input device "Video Bus" (type: >> KEYBOARD, id 7) >> [ 21.359] (**) Option "xkb_rules" "evdev" >> [ 21.359] (**) Option "xkb_model" "pc105" >> [ 21.359] (**) Option "xkb_layout" "dk" >> [ 21.359] (II) config/udev: Adding input device Video Bus >> (/dev/input/event16) >> [ 21.359] (**) Video Bus: Applying InputClass "evdev keyboard catchall" >> [ 21.361] (II) Using input driver 'evdev' for 'Video Bus' >> [ 21.361] (**) Video Bus: always reports core events >> [ 21.361] (**) evdev: Video Bus: Device: "/dev/input/event16" >> [ 21.361] (--) evdev: Video Bus: Vendor 0 Product 0x6 >> [ 21.361] (--) evdev: Video Bus: Found keys >> [ 21.361] (II) evdev: Video Bus: Configuring as keyboard >> [ 21.361] (**) Option "config_info" >> "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input17/event16" >> [ 21.361] (II) XINPUT: Adding extended input device "Video Bus" (type: >> KEYBOARD, id 8) >> [ 21.361] (**) Option "xkb_rules" "evdev" >> [ 21.361] (**) Option "xkb_model" "pc105" >> [ 21.361] (**) Option "xkb_layout" "dk" >> [ 21.362] (II) config/udev: Adding input device Lid Switch >> (/dev/input/event1) >> [ 21.362] (II) No input driver specified, ignoring this device. >> [ 21.362] (II) This device may have been added with another device file. >> [ 21.362] (II) config/udev: Adding input device Sleep Button >> (/dev/input/event2) >> [ 21.362] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" >> [ 21.362] (II) Using input driver 'evdev' for 'Sleep Button' >> [ 21.362] (**) Sleep Button: always reports core events >> [ 21.362] (**) evdev: Sleep Button: Device: "/dev/input/event2" >> [ 21.362] (--) evdev: Sleep Button: Vendor 0 Product 0x3 >> [ 21.364] (--) evdev: Sleep Button: Found keys >> [ 21.364] (II) evdev: Sleep Button: Configuring as keyboard >> [ 21.364] (**) Option "config_info" >> "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event2" >> [ 21.364] (II) XINPUT: Adding extended input device "Sleep Button" (type: >> KEYBOARD, id 9) >> [ 21.364] (**) Option "xkb_rules" "evdev" >> [ 21.364] (**) Option "xkb_model" "pc105" >> [ 21.364] (**) Option "xkb_layout" "dk" >> [ 21.365] (II) config/udev: Adding input device HDA Intel HDMI >> HDMI/DP,pcm=3 (/dev/input/event18) >> [ 21.365] (II) No input driver specified, ignoring this device. >> [ 21.365] (II) This device may have been added with another device file. >> [ 21.365] (II) config/udev: Adding input device HDA Intel HDMI >> HDMI/DP,pcm=7 (/dev/input/event19) >> [ 21.365] (II) No input driver specified, ignoring this device. >> [ 21.365] (II) This device may have been added with another device file. >> [ 21.365] (II) config/udev: Adding input device HDA Intel HDMI >> HDMI/DP,pcm=8 (/dev/input/event20) >> [ 21.365] (II) No input driver specified, ignoring this device. >> [ 21.365] (II) This device may have been added with another device file. >> [ 21.366] (II) config/udev: Adding input device Logitech M705 >> (/dev/input/event4) >> [ 21.366] (**) Logitech M705: Applying InputClass "evdev pointer catchall" >> [ 21.366] (II) Using input driver 'evdev' for 'Logitech M705' >> [ 21.366] (**) Logitech M705: always reports core events >> [ 21.366] (**) evdev: Logitech M705: Device: "/dev/input/event4" >> [ 21.366] (--) evdev: Logitech M705: Vendor 0x46d Product 0x101b >> [ 21.366] (--) evdev: Logitech M705: Found 20 mouse buttons >> [ 21.366] (--) evdev: Logitech M705: Found scroll wheel(s) >> [ 21.366] (--) evdev: Logitech M705: Found relative axes >> [ 21.366] (--) evdev: Logitech M705: Found x and y relative axes >> [ 21.366] (II) evdev: Logitech M705: Configuring as mouse >> [ 21.366] (II) evdev: Logitech M705: Adding scrollwheel support >> [ 21.366] (**) evdev: Logitech M705: YAxisMapping: buttons 4 and 5 >> [ 21.366] (**) evdev: Logitech M705: EmulateWheelButton: 4, >> EmulateWheelInertia: 10, EmulateWheelTimeout: 200 >> [ 21.366] (**) Option "config_info" >> "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.2/0003:046D:C52B.0003/0003:046D:101B.0004/input/input6/event4" >> [ 21.366] (II) XINPUT: Adding extended input device "Logitech M705" >> (type: MOUSE, id 10) >> [ 21.366] (II) evdev: Logitech M705: initialized for relative axes. >> [ 21.366] (**) Logitech M705: (accel) keeping acceleration scheme 1 >> [ 21.366] (**) Logitech M705: (accel) acceleration profile 0 >> [ 21.366] (**) Logitech M705: (accel) acceleration factor: 2.000 >> [ 21.366] (**) Logitech M705: (accel) acceleration threshold: 4 >> [ 21.367] (II) config/udev: Adding input device Logitech M705 >> (/dev/input/mouse0) >> [ 21.367] (II) No input driver specified, ignoring this device. >> [ 21.367] (II) This device may have been added with another device file. >> [ 21.367] (II) config/udev: Adding input device Lite-On Technology USB >> Productivity Option Keyboard( has the hub in # 1 ) (/dev/input/event6) >> [ 21.367] (**) Lite-On Technology USB Productivity Option Keyboard( has >> the hub in # 1 ): Applying InputClass "evdev keyboard catchall" >> [ 21.367] (II) Using input driver 'evdev' for 'Lite-On Technology USB >> Productivity Option Keyboard( has the hub in # 1 )' >> [ 21.367] (**) Lite-On Technology USB Productivity Option Keyboard( has >> the hub in # 1 ): always reports core events >> [ 21.367] (**) evdev: Lite-On Technology USB Productivity Option >> Keyboard( has the hub in # 1 ): Device: "/dev/input/event6" >> [ 21.367] (--) evdev: Lite-On Technology USB Productivity Option >> Keyboard( has the hub in # 1 ): Vendor 0x4b3 Product 0x301b >> [ 21.367] (--) evdev: Lite-On Technology USB Productivity Option >> Keyboard( has the hub in # 1 ): Found keys >> [ 21.367] (II) evdev: Lite-On Technology USB Productivity Option >> Keyboard( has the hub in # 1 ): Configuring as keyboard >> [ 21.367] (**) Option "config_info" >> "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.2/2-2.2.1/2-2.2.1:1.0/0003:04B3:301B.0005/input/input8/event6" >> [ 21.367] (II) XINPUT: Adding extended input device "Lite-On Technology >> USB Productivity Option Keyboard( has the hub in # 1 )" (type: KEYBOARD, id >> 11) >> [ 21.367] (**) Option "xkb_rules" "evdev" >> [ 21.367] (**) Option "xkb_model" "pc105" >> [ 21.367] (**) Option "xkb_layout" "dk" >> [ 21.368] (II) config/udev: Adding input device Lite-On Technology USB >> Productivity Option Keyboard( has the hub in # 1 ) (/dev/input/event7) >> [ 21.368] (**) Lite-On Technology USB Productivity Option Keyboard( has >> the hub in # 1 ): Applying InputClass "evdev keyboard catchall" >> [ 21.368] (II) Using input driver 'evdev' for 'Lite-On Technology USB >> Productivity Option Keyboard( has the hub in # 1 )' >> [ 21.368] (**) Lite-On Technology USB Productivity Option Keyboard( has >> the hub in # 1 ): always reports core events >> [ 21.368] (**) evdev: Lite-On Technology USB Productivity Option >> Keyboard( has the hub in # 1 ): Device: "/dev/input/event7" >> [ 21.368] (--) evdev: Lite-On Technology USB Productivity Option >> Keyboard( has the hub in # 1 ): Vendor 0x4b3 Product 0x301b >> [ 21.368] (--) evdev: Lite-On Technology USB Productivity Option >> Keyboard( has the hub in # 1 ): Found keys >> [ 21.368] (II) evdev: Lite-On Technology USB Productivity Option >> Keyboard( has the hub in # 1 ): Configuring as keyboard >> [ 21.368] (**) Option "config_info" >> "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.2/2-2.2.1/2-2.2.1:1.1/0003:04B3:301B.0006/input/input9/event7" >> [ 21.368] (II) XINPUT: Adding extended input device "Lite-On Technology >> USB Productivity Option Keyboard( has the hub in # 1 )" (type: KEYBOARD, id >> 12) >> [ 21.368] (**) Option "xkb_rules" "evdev" >> [ 21.368] (**) Option "xkb_model" "pc105" >> [ 21.368] (**) Option "xkb_layout" "dk" >> [ 21.369] (II) config/udev: Adding input device Integrated Camera >> (/dev/input/event17) >> [ 21.369] (**) Integrated Camera: Applying InputClass "evdev keyboard >> catchall" >> [ 21.369] (II) Using input driver 'evdev' for 'Integrated Camera' >> [ 21.369] (**) Integrated Camera: always reports core events >> [ 21.369] (**) evdev: Integrated Camera: Device: "/dev/input/event17" >> [ 21.369] (--) evdev: Integrated Camera: Vendor 0x5986 Product 0x366 >> [ 21.369] (--) evdev: Integrated Camera: Found keys >> [ 21.369] (II) evdev: Integrated Camera: Configuring as keyboard >> [ 21.369] (**) Option "config_info" >> "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input18/event17" >> [ 21.369] (II) XINPUT: Adding extended input device "Integrated Camera" >> (type: KEYBOARD, id 13) >> [ 21.369] (**) Option "xkb_rules" "evdev" >> [ 21.369] (**) Option "xkb_model" "pc105" >> [ 21.369] (**) Option "xkb_layout" "dk" >> [ 21.370] (II) config/udev: Adding input device HDA Digital PCBeep >> (/dev/input/event10) >> [ 21.370] (II) No input driver specified, ignoring this device. >> [ 21.370] (II) This device may have been added with another device file. >> [ 21.370] (II) config/udev: Adding input device HDA Intel PCH Dock Mic >> (/dev/input/event11) >> [ 21.370] (II) No input driver specified, ignoring this device. >> [ 21.370] (II) This device may have been added with another device file. >> [ 21.370] (II) config/udev: Adding input device HDA Intel PCH Mic >> (/dev/input/event12) >> [ 21.370] (II) No input driver specified, ignoring this device. >> [ 21.370] (II) This device may have been added with another device file. >> [ 21.370] (II) config/udev: Adding input device HDA Intel PCH Dock >> Headphone (/dev/input/event13) >> [ 21.370] (II) No input driver specified, ignoring this device. >> [ 21.370] (II) This device may have been added with another device file. >> [ 21.375] (II) config/udev: Adding input device HDA Intel PCH Headphone >> (/dev/input/event14) >> [ 21.375] (II) No input driver specified, ignoring this device. >> [ 21.375] (II) This device may have been added with another device file. >> [ 21.375] (II) config/udev: Adding input device AT Translated Set 2 >> keyboard (/dev/input/event0) >> [ 21.375] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev >> keyboard catchall" >> [ 21.375] (II) Using input driver 'evdev' for 'AT Translated Set 2 >> keyboard' >> [ 21.375] (**) AT Translated Set 2 keyboard: always reports core events >> [ 21.375] (**) evdev: AT Translated Set 2 keyboard: Device: >> "/dev/input/event0" >> [ 21.375] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 >> [ 21.375] (--) evdev: AT Translated Set 2 keyboard: Found keys >> [ 21.375] (II) evdev: AT Translated Set 2 keyboard: Configuring as >> keyboard >> [ 21.375] (**) Option "config_info" >> "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" >> [ 21.375] (II) XINPUT: Adding extended input device "AT Translated Set 2 >> keyboard" (type: KEYBOARD, id 14) >> [ 21.375] (**) Option "xkb_rules" "evdev" >> [ 21.375] (**) Option "xkb_model" "pc105" >> [ 21.375] (**) Option "xkb_layout" "dk" >> [ 21.376] (II) config/udev: Adding input device SynPS/2 Synaptics >> TouchPad (/dev/input/event5) >> [ 21.376] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev >> touchpad catchall" >> [ 21.376] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev >> touchscreen catchall" >> [ 21.376] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad >> catchall" >> [ 21.376] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default >> clickpad buttons" >> [ 21.376] (II) LoadModule: "synaptics" >> [ 21.376] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so >> [ 21.381] (II) Module synaptics: vendor="X.Org Foundation" >> [ 21.381] compiled for 1.18.1, module version = 1.8.2 >> [ 21.381] Module class: X.Org XInput Driver >> [ 21.381] ABI class: X.Org XInput driver, version 22.1 >> [ 21.381] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics >> TouchPad' >> [ 21.381] (**) SynPS/2 Synaptics TouchPad: always reports core events >> [ 21.381] (**) Option "Device" "/dev/input/event5" >> [ 21.464] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad >> property >> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1266 - >> 5676 (res 45) >> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1096 - >> 4758 (res 68) >> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - >> 255 >> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range >> 0 - 15 >> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left >> double triple >> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product >> 0x7 >> [ 21.464] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0" >> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found >> [ 21.464] (**) SynPS/2 Synaptics TouchPad: always reports core events >> [ 21.500] (**) Option "config_info" >> "udev:/sys/devices/platform/i8042/serio1/input/input5/event5" >> [ 21.500] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics >> TouchPad" (type: TOUCHPAD, id 15) >> [ 21.500] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is >> now constant deceleration 2.5 >> [ 21.500] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is >> now 1.75 >> [ 21.500] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor >> is now 0.035 >> [ 21.500] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration >> scheme 1 >> [ 21.500] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1 >> [ 21.500] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: >> 2.000 >> [ 21.500] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration >> threshold: 4 >> [ 21.500] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found >> [ 21.500] (II) config/udev: Adding input device SynPS/2 Synaptics >> TouchPad (/dev/input/mouse1) >> [ 21.500] (**) SynPS/2 Synaptics TouchPad: Ignoring device from >> InputClass "touchpad ignore duplicates" >> [ 21.501] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint >> (/dev/input/event8) >> [ 21.501] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer >> catchall" >> [ 21.501] (**) TPPS/2 IBM TrackPoint: Applying InputClass "trackpoint >> catchall" >> [ 21.501] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint' >> [ 21.501] (**) TPPS/2 IBM TrackPoint: always reports core events >> [ 21.501] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event8" >> [ 21.501] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa >> [ 21.501] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons >> [ 21.501] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes >> [ 21.501] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes >> [ 21.501] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse >> [ 21.501] (**) Option "Emulate3Buttons" "true" >> [ 21.501] (**) Option "EmulateWheel" "true" >> [ 21.501] (**) Option "EmulateWheelButton" "2" >> [ 21.501] (**) Option "YAxisMapping" "4 5" >> [ 21.501] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5 >> [ 21.501] (**) Option "XAxisMapping" "6 7" >> [ 21.501] (**) evdev: TPPS/2 IBM TrackPoint: XAxisMapping: buttons 6 and 7 >> [ 21.501] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 2, >> EmulateWheelInertia: 10, EmulateWheelTimeout: 200 >> [ 21.501] (**) Option "config_info" >> "udev:/sys/devices/platform/i8042/serio1/serio2/input/input7/event8" >> [ 21.501] (II) XINPUT: Adding extended input device "TPPS/2 IBM >> TrackPoint" (type: MOUSE, id 16) >> [ 21.501] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative >> axes. >> [ 21.501] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme >> 1 >> [ 21.501] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0 >> [ 21.501] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000 >> [ 21.501] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4 >> [ 21.501] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint >> (/dev/input/mouse2) >> [ 21.501] (II) No input driver specified, ignoring this device. >> [ 21.501] (II) This device may have been added with another device file. >> [ 21.502] (II) config/udev: Adding input device ThinkPad Extra Buttons >> (/dev/input/event9) >> [ 21.502] (**) ThinkPad Extra Buttons: Applying InputClass "evdev >> keyboard catchall" >> [ 21.502] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons' >> [ 21.502] (**) ThinkPad Extra Buttons: always reports core events >> [ 21.502] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event9" >> [ 21.502] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054 >> [ 21.502] (--) evdev: ThinkPad Extra Buttons: Found keys >> [ 21.502] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard >> [ 21.502] (**) Option "config_info" >> "udev:/sys/devices/platform/thinkpad_acpi/input/input10/event9" >> [ 21.502] (II) XINPUT: Adding extended input device "ThinkPad Extra >> Buttons" (type: KEYBOARD, id 17) >> [ 21.502] (**) Option "xkb_rules" "evdev" >> [ 21.502] (**) Option "xkb_model" "pc105" >> [ 21.502] (**) Option "xkb_layout" "dk" >> [ 23.053] (II) intel(0): EDID vendor "MEI", prod id 38562 >> [ 23.053] (II) intel(0): EDID quirk: Use maximum size instead of >> detailed timing sizes. >> [ 23.053] (II) intel(0): Using EDID range info for horizontal sync >> [ 23.053] (II) intel(0): Using EDID range info for vertical refresh >> [ 23.053] (II) intel(0): Printing DDC gathered Modelines: >> [ 23.053] (II) intel(0): Modeline "2880x1620"x0.0 302.50 2880 2924 2928 >> 3076 1620 1629 1630 1640 +hsync +vsync (98.3 kHz eP) >> [ 23.053] (II) intel(0): Modeline "2880x1620"x0.0 302.50 2880 2924 2928 >> 3076 1620 1629 1630 1967 +hsync +vsync (98.3 kHz e) >> [ 23.909] (II) intel(0): resizing framebuffer to 5440x1620 >> [ 23.960] (II) intel(0): switch to mode 2560x1440@60.0 on DP1 using pipe >> 1, position (2880, 0), rotation normal, reflection none > > > > > >> _______________________________________________ >> Nouveau mailing list >> Nouveau@lists.freedesktop.org >> https://lists.freedesktop.org/mailman/listinfo/nouveau >
signature.asc
Description: OpenPGP digital signature
_______________________________________________ Nouveau mailing list Nouveau@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/nouveau