Aha! That seems to do it. If I interpret correctly, it doesn't set it quite to full power, though, but it's certainly an improvement:
07: core 405 MHz memory 810 MHz 0a: core 270-1124 MHz memory 1600 MHz 0f: core 270-1124 MHz memory 2002 MHz AC DC * AC: core 1012 MHz memory 2002 MHz A short run of glmark2 shows aver 100% improvement to ~550 FPS. Interestingly, it's still nowhere near a match for the built-in Broadwell-U with i915, which runs at ~1400 - ~1900 FPS. Thank you very much - I'll keep a look-out for future improvements :-) Best regards, Sune Mølgaard On 2016-12-08 14:14, Karol Herbst wrote: > also you can't change the clocks when there is nothing running on the > GPU. I have some patches pending for this in another series, but maybe > I may be able toe extract those fixes. > > Changing the clocks while something is running shouldn't cause any > troubles. Alternatively if you don't care about power consumption, you > can boot with nouveau.runpm=0 so that the gpu is always on. > > 2016-12-08 13:25 GMT+01:00 Sune Mølgaard <s...@translucent.dk>: >> Hi, >> >> With drm-next from >> http://kernel.ubuntu.com/~kernel-ppa/mainline/drm-next/2016-12-08/ >> >> I don't get the error messages, but I still get a soft cpu lockup. >> >> What info would you need from me to get it working? >> >> Best regards, >> >> Sune Mølgaard >> >> >> On 2016-12-08 08:10, Karol Herbst wrote: >>> hi, >>> >>> give the drm-next kernel tree a try. Sadly the reclocking improvements >>> didn't land with 4.9, so 4.10 is required. >>> >>> Greetings. >>> >>> On 7 December 2016 10:26:44 a.m. GMT+01:00, "Sune Mølgaard" >>> <s...@translucent.dk> wrote: >>>> Hi again, >>>> >>>> It works :-) >>>> >>>> Reclocking, however, is another kettle of fish. >>>> >>>> Trying #echo 0f > /sys/kernel/debug/dri/0/pstate hangs X. >>>> >>>> Trying the same with no X running reveals: >>>> >>>> Dec 7 10:08:42 dell-smo kernel: [ 728.831020] nouveau 0000:08:00.0: >>>> clk: unable to find matching pll values >>>> >>>> a number of time as then soft lockup. >>>> >>>> Very much akin to >>>> https://people.freedesktop.org/~cbrill/dri-log/?channel=nouveau&date=2016-04-14 >>>> , actually, so what I gather from that is that I need to provide you >>>> guys with some info about the card, so which do you need, and how do I >>>> extract them? >>>> >>>> Best regards, >>>> >>>> Sune Mølgaard >>>> >>>> On 2016-10-27 11:06, Pierre Moreau wrote: >>>>> Hello, >>>>> >>>>> The idea was to use the modesetting DDX instead of Nouveau’s one for >>>> Maxwell+ >>>>> as EXA was [broken][1]. But you can give a try at Ilia’s >>>> [patches][2], which >>>>> fix the Nouveau DDX for GM10x and GM20x (I don’t think it has been >>>> tested on a >>>>> GM108 yet). >>>>> >>>>> Best regards, >>>>> Pierre Moreau >>>>> >>>>> [1]: >>>> https://cgit.freedesktop.org/nouveau/xf86-video-nouveau/commit/?id=3e2e0faa2ee1cce9c1bb5c7ad80d0592460f3edc >>>>> [2]: https://github.com/imirkin/xf86-video-nouveau/ >>>>> >>>>> >>>>> On 11:29 am - Oct 18 2016, Sune Mølgaard wrote: >>>>>> Hi, >>>>>> >>>>>> It would seem like it (attachments are from 4.9-rc1, btw), but it >>>>>> doesn't look like there is any support in the Xorg driver. >>>>>> >>>>>> How can I help with that? >>>>>> >>>>>> Best regards, >>>>>> >>>>>> Sune Mølgaard >>>>>> Translucent ApS >>>>>> >>>>>> On 2016-04-22 09:33, Pierre Moreau wrote: >>>>>>> Hello, >>>>>>> >>>>>>> A patch was merged yesterday to recognise GM108 (see >>>>>>> >>>> https://github.com/skeggsb/nouveau/commit/3da1f2a19e5e8dc8d68a4400d9cca01c64ecd59e). >>>>>>> I guess it will make it into 4.7. >>>>>>> >>>>>>> Pierre >>>>>> >>>>> >>>>>> lspci -vvvv >>>>>> 00:00.0 Host bridge: Intel Corporation Broadwell-U Host Bridge -OPI >>>> (rev 09) >>>>>> Subsystem: Lenovo Broadwell-U Host Bridge -OPI >>>>>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >>>> Stepping- SERR- FastB2B- DisINTx- >>>>>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- >>>> <TAbort- <MAbort+ >SERR- <PERR- INTx- >>>>>> Latency: 0 >>>>>> Capabilities: <access denied> >>>>>> Kernel driver in use: bdw_uncore >>>>>> >>>>>> 00:02.0 VGA compatible controller: Intel Corporation Broadwell-U >>>> Integrated Graphics (rev 09) (prog-if 00 [VGA controller]) >>>>>> Subsystem: Lenovo Broadwell-U Integrated Graphics >>>>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >>>> Stepping- SERR- FastB2B- DisINTx+ >>>>>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- >>>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>>>> Latency: 0 >>>>>> Interrupt: pin A routed to IRQ 49 >>>>>> Region 0: Memory at f2000000 (64-bit, non-prefetchable) [size=16M] >>>>>> Region 2: Memory at c0000000 (64-bit, prefetchable) [size=512M] >>>>>> Region 4: I/O ports at 4000 [size=64] >>>>>> [virtual] Expansion ROM at 000c0000 [disabled] [size=128K] >>>>>> Capabilities: <access denied> >>>>>> Kernel driver in use: i915 >>>>>> Kernel modules: i915 >>>>>> >>>>>> 00:03.0 Audio device: Intel Corporation Broadwell-U Audio Controller >>>> (rev 09) >>>>>> Subsystem: Lenovo Broadwell-U Audio Controller >>>>>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >>>> Stepping- SERR- FastB2B- DisINTx+ >>>>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >>>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>>>> Latency: 0, Cache Line Size: 64 bytes >>>>>> Interrupt: pin A routed to IRQ 50 >>>>>> Region 0: Memory at f4230000 (64-bit, non-prefetchable) [size=16K] >>>>>> Capabilities: <access denied> >>>>>> Kernel driver in use: snd_hda_intel >>>>>> Kernel modules: snd_hda_intel >>>>>> >>>>>> 00:14.0 USB controller: Intel Corporation Wildcat Point-LP USB xHCI >>>> Controller (rev 03) (prog-if 30 [XHCI]) >>>>>> Subsystem: Lenovo Wildcat Point-LP USB xHCI Controller >>>>>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >>>> Stepping- SERR- FastB2B- DisINTx+ >>>>>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- >>>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>>>> Latency: 0 >>>>>> Interrupt: pin A routed to IRQ 42 >>>>>> Region 0: Memory at f4220000 (64-bit, non-prefetchable) [size=64K] >>>>>> Capabilities: <access denied> >>>>>> Kernel driver in use: xhci_hcd >>>>>> >>>>>> 00:16.0 Communication controller: Intel Corporation Wildcat Point-LP >>>> MEI Controller #1 (rev 03) >>>>>> Subsystem: Lenovo Wildcat Point-LP MEI Controller >>>>>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >>>> Stepping- SERR- FastB2B- DisINTx+ >>>>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >>>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>>>> Latency: 0 >>>>>> Interrupt: pin A routed to IRQ 46 >>>>>> Region 0: Memory at f4239000 (64-bit, non-prefetchable) [size=32] >>>>>> Capabilities: <access denied> >>>>>> Kernel driver in use: mei_me >>>>>> Kernel modules: mei_me >>>>>> >>>>>> 00:19.0 Ethernet controller: Intel Corporation Ethernet Connection >>>> (3) I218-V (rev 03) >>>>>> Subsystem: Lenovo Ethernet Connection (3) I218-V >>>>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >>>> Stepping- SERR- FastB2B- DisINTx+ >>>>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >>>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>>>> Latency: 0 >>>>>> Interrupt: pin A routed to IRQ 43 >>>>>> Region 0: Memory at f4200000 (32-bit, non-prefetchable) [size=128K] >>>>>> Region 1: Memory at f423e000 (32-bit, non-prefetchable) [size=4K] >>>>>> Region 2: I/O ports at 4080 [size=32] >>>>>> Capabilities: <access denied> >>>>>> Kernel driver in use: e1000e >>>>>> Kernel modules: e1000e >>>>>> >>>>>> 00:1b.0 Audio device: Intel Corporation Wildcat Point-LP High >>>> Definition Audio Controller (rev 03) >>>>>> Subsystem: Lenovo Wildcat Point-LP High Definition Audio Controller >>>>>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >>>> Stepping- SERR- FastB2B- DisINTx+ >>>>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >>>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>>>> Latency: 32, Cache Line Size: 64 bytes >>>>>> Interrupt: pin A routed to IRQ 47 >>>>>> Region 0: Memory at f4234000 (64-bit, non-prefetchable) [size=16K] >>>>>> Capabilities: <access denied> >>>>>> Kernel driver in use: snd_hda_intel >>>>>> Kernel modules: snd_hda_intel >>>>>> >>>>>> 00:1c.0 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express >>>> Root Port #6 (rev e3) (prog-if 00 [Normal decode]) >>>>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >>>> Stepping- SERR- FastB2B- DisINTx- >>>>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >>>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>>>> Latency: 0, Cache Line Size: 64 bytes >>>>>> Interrupt: pin B routed to IRQ 17 >>>>>> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 >>>>>> I/O behind bridge: 0000f000-00000fff >>>>>> Memory behind bridge: f4100000-f41fffff >>>>>> Prefetchable memory behind bridge: >>>> 00000000fff00000-00000000000fffff >>>>>> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- >>>> <TAbort- <MAbort+ <SERR- <PERR- >>>>>> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- >>>>>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- >>>>>> Capabilities: <access denied> >>>>>> Kernel driver in use: pcieport >>>>>> Kernel modules: shpchp >>>>>> >>>>>> 00:1c.1 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express >>>> Root Port #3 (rev e3) (prog-if 00 [Normal decode]) >>>>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >>>> Stepping- SERR- FastB2B- DisINTx- >>>>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >>>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>>>> Latency: 0, Cache Line Size: 64 bytes >>>>>> Interrupt: pin C routed to IRQ 18 >>>>>> Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 >>>>>> I/O behind bridge: 0000f000-00000fff >>>>>> Memory behind bridge: f4000000-f40fffff >>>>>> Prefetchable memory behind bridge: >>>> 00000000fff00000-00000000000fffff >>>>>> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- >>>> <TAbort- <MAbort+ <SERR- <PERR- >>>>>> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- >>>>>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- >>>>>> Capabilities: <access denied> >>>>>> Kernel driver in use: pcieport >>>>>> Kernel modules: shpchp >>>>>> >>>>>> 00:1c.4 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express >>>> Root Port #5 (rev e3) (prog-if 00 [Normal decode]) >>>>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >>>> Stepping- SERR- FastB2B- DisINTx- >>>>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >>>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>>>> Latency: 0, Cache Line Size: 64 bytes >>>>>> Interrupt: pin A routed to IRQ 16 >>>>>> Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 >>>>>> I/O behind bridge: 00003000-00003fff >>>>>> Memory behind bridge: f3000000-f3ffffff >>>>>> Prefetchable memory behind bridge: >>>> 00000000e0000000-00000000f1ffffff >>>>>> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- >>>> <TAbort- <MAbort+ <SERR- <PERR- >>>>>> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- >>>>>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- >>>>>> Capabilities: <access denied> >>>>>> Kernel driver in use: pcieport >>>>>> Kernel modules: shpchp >>>>>> >>>>>> 00:1d.0 USB controller: Intel Corporation Wildcat Point-LP USB EHCI >>>> Controller (rev 03) (prog-if 20 [EHCI]) >>>>>> Subsystem: Lenovo Wildcat Point-LP USB EHCI Controller >>>>>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >>>> Stepping- SERR- FastB2B- DisINTx- >>>>>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- >>>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>>>> Latency: 0 >>>>>> Interrupt: pin A routed to IRQ 23 >>>>>> Region 0: Memory at f423d000 (32-bit, non-prefetchable) [size=1K] >>>>>> Capabilities: <access denied> >>>>>> Kernel driver in use: ehci-pci >>>>>> >>>>>> 00:1f.0 ISA bridge: Intel Corporation Wildcat Point-LP LPC >>>> Controller (rev 03) >>>>>> Subsystem: Lenovo Wildcat Point-LP LPC Controller >>>>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >>>> Stepping- SERR- FastB2B- DisINTx- >>>>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- >>>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>>>> Latency: 0 >>>>>> Capabilities: <access denied> >>>>>> Kernel driver in use: lpc_ich >>>>>> Kernel modules: lpc_ich >>>>>> >>>>>> 00:1f.2 SATA controller: Intel Corporation Wildcat Point-LP SATA >>>> Controller [AHCI Mode] (rev 03) (prog-if 01 [AHCI 1.0]) >>>>>> Subsystem: Lenovo Wildcat Point-LP SATA Controller [AHCI Mode] >>>>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >>>> Stepping- SERR- FastB2B- DisINTx- >>>>>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- >>>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>>>> Latency: 0 >>>>>> Interrupt: pin B routed to IRQ 19 >>>>>> Region 0: I/O ports at 40a8 [size=8] >>>>>> Region 1: I/O ports at 40b4 [size=4] >>>>>> Region 2: I/O ports at 40a0 [size=8] >>>>>> Region 3: I/O ports at 40b0 [size=4] >>>>>> Region 4: I/O ports at 4060 [size=32] >>>>>> Region 5: Memory at f423c000 (32-bit, non-prefetchable) [size=2K] >>>>>> Capabilities: <access denied> >>>>>> Kernel driver in use: ahci >>>>>> Kernel modules: ahci >>>>>> >>>>>> 00:1f.3 SMBus: Intel Corporation Wildcat Point-LP SMBus Controller >>>> (rev 03) >>>>>> Subsystem: Lenovo Wildcat Point-LP SMBus Controller >>>>>> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- >>>> Stepping- SERR- FastB2B- DisINTx- >>>>>> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- >>>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>>>> Interrupt: pin C routed to IRQ 10 >>>>>> Region 0: Memory at f4238000 (64-bit, non-prefetchable) [size=256] >>>>>> Region 4: I/O ports at efa0 [size=32] >>>>>> Kernel modules: i2c_i801 >>>>>> >>>>>> 00:1f.6 Signal processing controller: Intel Corporation Wildcat >>>> Point-LP Thermal Management Controller (rev 03) >>>>>> Subsystem: Lenovo Wildcat Point-LP Thermal Management Controller >>>>>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >>>> Stepping- SERR- FastB2B- DisINTx- >>>>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >>>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>>>> Latency: 0 >>>>>> Interrupt: pin C routed to IRQ 18 >>>>>> Region 0: Memory at f423b000 (64-bit, non-prefetchable) [size=4K] >>>>>> Capabilities: <access denied> >>>>>> Kernel driver in use: intel_pch_thermal >>>>>> Kernel modules: intel_pch_thermal >>>>>> >>>>>> 02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. >>>> RTS5227 PCI Express Card Reader (rev 01) >>>>>> Subsystem: Lenovo RTS5227 PCI Express Card Reader >>>>>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >>>> Stepping- SERR- FastB2B- DisINTx+ >>>>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >>>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>>>> Latency: 0, Cache Line Size: 64 bytes >>>>>> Interrupt: pin A routed to IRQ 44 >>>>>> Region 0: Memory at f4100000 (32-bit, non-prefetchable) [size=4K] >>>>>> Capabilities: <access denied> >>>>>> Kernel driver in use: rtsx_pci >>>>>> Kernel modules: rtsx_pci >>>>>> >>>>>> 03:00.0 Network controller: Intel Corporation Wireless 7265 (rev 99) >>>>>> Subsystem: Intel Corporation Dual Band Wireless-AC 7265 >>>>>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >>>> Stepping- SERR- FastB2B- DisINTx+ >>>>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >>>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>>>> Latency: 0, Cache Line Size: 64 bytes >>>>>> Interrupt: pin A routed to IRQ 48 >>>>>> Region 0: Memory at f4000000 (64-bit, non-prefetchable) [size=8K] >>>>>> Capabilities: <access denied> >>>>>> Kernel driver in use: iwlwifi >>>>>> Kernel modules: iwlwifi >>>>>> >>>>>> 08:00.0 3D controller: NVIDIA Corporation GM108GLM [Quadro K620M] >>>> (rev a2) >>>>>> Subsystem: Lenovo GM108GLM [Quadro K620M] >>>>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >>>> Stepping- SERR- FastB2B- DisINTx+ >>>>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >>>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>>>> Latency: 0, Cache Line Size: 64 bytes >>>>>> Interrupt: pin A routed to IRQ 45 >>>>>> Region 0: Memory at f3000000 (32-bit, non-prefetchable) [size=16M] >>>>>> Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M] >>>>>> Region 3: Memory at f0000000 (64-bit, prefetchable) [size=32M] >>>>>> Region 5: I/O ports at 3000 [size=128] >>>>>> Expansion ROM at <ignored> [disabled] >>>>>> Capabilities: <access denied> >>>>>> Kernel driver in use: nouveau >>>>>> Kernel modules: nvidiafb, nouveau >>>>>> >>>>> >>>>>> dmesg |egrep -i "nouveau|nvidia" >>>>>> [ 1.893467] nouveau: detected PR support, will not use DSM >>>>>> [ 1.893677] nouveau 0000:08:00.0: NVIDIA GM108 (1183a0a2) >>>>>> [ 1.907342] nouveau 0000:08:00.0: bios: version 82.08.1f.00.03 >>>>>> [ 1.991211] nouveau 0000:08:00.0: priv: HUB0: 6013d4 badf573f >>>> (1d408200) >>>>>> [ 1.991212] nouveau 0000:08:00.0: fb: 2048 MiB DDR3 >>>>>> [ 3.269352] nouveau 0000:08:00.0: DRM: VRAM: 2048 MiB >>>>>> [ 3.269408] nouveau 0000:08:00.0: DRM: GART: 1048576 MiB >>>>>> [ 3.269465] nouveau 0000:08:00.0: DRM: Pointer to TMDS table >>>> invalid >>>>>> [ 3.269523] nouveau 0000:08:00.0: DRM: DCB version 4.0 >>>>>> [ 3.269579] nouveau 0000:08:00.0: DRM: Pointer to flat panel >>>> table invalid >>>>>> [ 3.451054] nouveau 0000:08:00.0: DRM: MM: using COPY for buffer >>>> copies >>>>>> [ 3.451117] [drm] Initialized nouveau 1.3.1 20120801 for >>>> 0000:08:00.0 on minor 0 >>>>>> [ 8.925115] nouveau 0000:08:00.0: DRM: evicting buffers... >>>>>> [ 8.925189] nouveau 0000:08:00.0: DRM: waiting for kernel >>>> channels to go idle... >>>>>> [ 8.925283] nouveau 0000:08:00.0: DRM: suspending client object >>>> trees... >>>>>> [ 8.929091] nouveau 0000:08:00.0: DRM: suspending kernel object >>>> tree... >>>>>> [ 17.449259] hid_logitech_hidpp hid_logitech_dj usbhid hid >>>> crct10dif_pclmul rtsx_pci_sdmmc crc32_pclmul crc32c_intel mmc_core >>>> nouveau ghash_clmulni_intel aesni_intel mxm_wmi i2c_algo_bit aes_x86_64 >>>> ttm lrw gf128mul glue_helper drm_kms_helper ablk_helper cryptd >>>> syscopyarea sysfillrect psmouse sysimgblt fb_sys_fops drm ahci libahci >>>> rtsx_pci e1000e ptp pps_core thermal wmi fjes video button >>>>>> [ 18.641499] nouveau 0000:08:00.0: DRM: resuming kernel object >>>> tree... >>>>>> [ 18.724503] nouveau 0000:08:00.0: priv: HUB0: 6013d4 badf573f >>>> (1f408200) >>>>>> [ 18.761491] nouveau 0000:08:00.0: priv: HUB0: 10ecc0 ffffffff >>>> (1d40822c) >>>>>> [ 18.761992] nouveau 0000:08:00.0: DRM: resuming client object >>>> trees... >>>>>> [ 26.025637] nouveau 0000:08:00.0: DRM: evicting buffers... >>>>>> [ 26.025639] nouveau 0000:08:00.0: DRM: waiting for kernel >>>> channels to go idle... >>>>>> [ 26.025662] nouveau 0000:08:00.0: DRM: suspending client object >>>> trees... >>>>>> [ 26.029451] nouveau 0000:08:00.0: DRM: suspending kernel object >>>> tree... >>>>> >>>>>> [ 20.874] >>>>>> X.Org X Server 1.18.4 >>>>>> Release Date: 2016-07-19 >>>>>> [ 20.874] X Protocol Version 11, Revision 0 >>>>>> [ 20.874] Build Operating System: Linux 3.13.0-95-generic x86_64 >>>> Ubuntu >>>>>> [ 20.874] Current Operating System: Linux dell-smo >>>> 4.9.0-040900rc1-generic #201610151630 SMP Sat Oct 15 20:33:39 UTC 2016 >>>> x86_64 >>>>>> [ 20.874] Kernel command line: >>>> BOOT_IMAGE=/vmlinuz-4.9.0-040900rc1-generic >>>> root=UUID=a9421b5e-ff3f-4ebd-8f9f-13d24c76ba34 ro >>>> cryptopts=target=sda6_crypt,source=/dev/disk/by-uuid/64096e82-f7f4-4917-80df-e123aa15a022,discard >>>> vt.handoff=7 >>>>>> [ 20.874] Build Date: 14 September 2016 03:33:24PM >>>>>> [ 20.874] xorg-server 2:1.18.4-0ubuntu0.1 (For technical support >>>> please see http://www.ubuntu.com/support) >>>>>> [ 20.874] Current version of pixman: 0.33.6 >>>>>> [ 20.874] Before reporting problems, check http://wiki.x.org >>>>>> to make sure that you have the latest version. >>>>>> [ 20.874] Markers: (--) probed, (**) from config file, (==) >>>> default setting, >>>>>> (++) from command line, (!!) notice, (II) informational, >>>>>> (WW) warning, (EE) error, (NI) not implemented, (??) unknown. >>>>>> [ 20.874] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 18 >>>> 09:21:13 2016 >>>>>> [ 20.877] (==) Using system config directory >>>> "/usr/share/X11/xorg.conf.d" >>>>>> [ 20.881] (==) No Layout section. Using the first Screen >>>> section. >>>>>> [ 20.881] (==) No screen section available. Using defaults. >>>>>> [ 20.881] (**) |-->Screen "Default Screen Section" (0) >>>>>> [ 20.881] (**) | |-->Monitor "<default monitor>" >>>>>> [ 20.882] (==) No monitor specified for screen "Default Screen >>>> Section". >>>>>> Using a default monitor configuration. >>>>>> [ 20.882] (==) Automatically adding devices >>>>>> [ 20.882] (==) Automatically enabling devices >>>>>> [ 20.882] (==) Automatically adding GPU devices >>>>>> [ 20.882] (==) Max clients allowed: 256, resource mask: 0x1fffff >>>>>> [ 20.889] (WW) The directory "/usr/share/fonts/X11/cyrillic" does >>>> not exist. >>>>>> [ 20.889] Entry deleted from font path. >>>>>> [ 20.892] (WW) The directory "/usr/share/fonts/X11/75dpi/" does >>>> not exist. >>>>>> [ 20.892] Entry deleted from font path. >>>>>> [ 20.893] (WW) The directory "/usr/share/fonts/X11/75dpi" does >>>> not exist. >>>>>> [ 20.893] Entry deleted from font path. >>>>>> [ 20.893] (==) FontPath set to: >>>>>> /usr/share/fonts/X11/misc, >>>>>> /usr/share/fonts/X11/100dpi/:unscaled, >>>>>> /usr/share/fonts/X11/Type1, >>>>>> /usr/share/fonts/X11/100dpi, >>>>>> built-ins >>>>>> [ 20.893] (==) ModulePath set to >>>> "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" >>>>>> [ 20.893] (II) The server relies on udev to provide the list of >>>> input devices. >>>>>> If no devices become available, reconfigure udev or disable >>>> AutoAddDevices. >>>>>> [ 20.894] (II) Loader magic: 0x563366d65dc0 >>>>>> [ 20.894] (II) Module ABI versions: >>>>>> [ 20.894] X.Org ANSI C Emulation: 0.4 >>>>>> [ 20.894] X.Org Video Driver: 20.0 >>>>>> [ 20.894] X.Org XInput driver : 22.1 >>>>>> [ 20.894] X.Org Server Extension : 9.0 >>>>>> [ 20.895] (++) using VT number 7 >>>>>> >>>>>> [ 20.895] (II) systemd-logind: logind integration requires >>>> -keeptty and -keeptty was not provided, disabling logind integration >>>>>> [ 20.895] (II) xfree86: Adding drm device (/dev/dri/card1) >>>>>> [ 20.910] (II) xfree86: Adding drm device (/dev/dri/card0) >>>>>> [ 20.912] (--) PCI:*(0:0:2:0) 8086:1616:17aa:2225 rev 9, Mem @ >>>> 0xf2000000/16777216, 0xc0000000/536870912, I/O @ 0x00004000/64, BIOS @ >>>> 0x????????/131072 >>>>>> [ 20.912] (--) PCI: (0:8:0:0) 10de:137a:17aa:2225 rev 162, Mem @ >>>> 0xf3000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ >>>> 0x00003000/128 >>>>>> [ 20.912] (II) LoadModule: "glx" >>>>>> [ 20.936] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so >>>>>> [ 20.980] (II) Module glx: vendor="X.Org Foundation" >>>>>> [ 20.980] compiled for 1.18.4, module version = 1.0.0 >>>>>> [ 20.980] ABI class: X.Org Server Extension, version 9.0 >>>>>> [ 20.980] (==) AIGLX enabled >>>>>> [ 20.980] (==) Matched intel as autoconfigured driver 0 >>>>>> [ 20.980] (==) Matched nvidia as autoconfigured driver 1 >>>>>> [ 20.980] (==) Matched nouveau as autoconfigured driver 2 >>>>>> [ 20.980] (==) Matched intel as autoconfigured driver 3 >>>>>> [ 20.980] (==) Matched modesetting as autoconfigured driver 4 >>>>>> [ 20.980] (==) Matched fbdev as autoconfigured driver 5 >>>>>> [ 20.980] (==) Matched vesa as autoconfigured driver 6 >>>>>> [ 20.980] (==) Assigned the driver to the xf86ConfigLayout >>>>>> [ 20.980] (II) LoadModule: "intel" >>>>>> [ 20.983] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so >>>>>> [ 20.988] (II) Module intel: vendor="X.Org Foundation" >>>>>> [ 20.988] compiled for 1.18.4, module version = 2.99.917 >>>>>> [ 20.988] Module class: X.Org Video Driver >>>>>> [ 20.988] ABI class: X.Org Video Driver, version 20.0 >>>>>> [ 20.988] (II) LoadModule: "nvidia" >>>>>> [ 20.991] (WW) Warning, couldn't open module nvidia >>>>>> [ 20.991] (II) UnloadModule: "nvidia" >>>>>> [ 20.991] (II) Unloading nvidia >>>>>> [ 20.991] (EE) Failed to load module "nvidia" (module does not >>>> exist, 0) >>>>>> [ 20.991] (II) LoadModule: "nouveau" >>>>>> [ 20.991] (II) Loading >>>> /usr/lib/xorg/modules/drivers/nouveau_drv.so >>>>>> [ 20.994] (II) Module nouveau: vendor="X.Org Foundation" >>>>>> [ 20.994] compiled for 1.18.3, module version = 1.0.13 >>>>>> [ 20.994] Module class: X.Org Video Driver >>>>>> [ 20.994] ABI class: X.Org Video Driver, version 20.0 >>>>>> [ 20.994] (II) LoadModule: "modesetting" >>>>>> [ 20.994] (II) Loading >>>> /usr/lib/xorg/modules/drivers/modesetting_drv.so >>>>>> [ 20.995] (II) Module modesetting: vendor="X.Org Foundation" >>>>>> [ 20.995] compiled for 1.18.4, module version = 1.18.4 >>>>>> [ 20.995] Module class: X.Org Video Driver >>>>>> [ 20.995] ABI class: X.Org Video Driver, version 20.0 >>>>>> [ 20.995] (II) LoadModule: "fbdev" >>>>>> [ 20.995] (WW) Warning, couldn't open module fbdev >>>>>> [ 20.995] (II) UnloadModule: "fbdev" >>>>>> [ 20.995] (II) Unloading fbdev >>>>>> [ 20.995] (EE) Failed to load module "fbdev" (module does not >>>> exist, 0) >>>>>> [ 20.995] (II) LoadModule: "vesa" >>>>>> [ 20.995] (WW) Warning, couldn't open module vesa >>>>>> [ 20.995] (II) UnloadModule: "vesa" >>>>>> [ 20.995] (II) Unloading vesa >>>>>> [ 20.995] (EE) Failed to load module "vesa" (module does not >>>> exist, 0) >>>>>> [ 20.995] (==) Matched intel as autoconfigured driver 0 >>>>>> [ 20.995] (==) Matched nvidia as autoconfigured driver 1 >>>>>> [ 20.995] (==) Matched nouveau as autoconfigured driver 2 >>>>>> [ 20.995] (==) Matched intel as autoconfigured driver 3 >>>>>> [ 20.995] (==) Matched modesetting as autoconfigured driver 4 >>>>>> [ 20.995] (==) Matched fbdev as autoconfigured driver 5 >>>>>> [ 20.995] (==) Matched vesa as autoconfigured driver 6 >>>>>> [ 20.995] (==) Assigned the driver to the xf86ConfigLayout >>>>>> [ 20.995] (II) LoadModule: "intel" >>>>>> [ 20.996] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so >>>>>> [ 20.996] (II) Module intel: vendor="X.Org Foundation" >>>>>> [ 20.996] compiled for 1.18.4, module version = 2.99.917 >>>>>> [ 20.996] Module class: X.Org Video Driver >>>>>> [ 20.996] ABI class: X.Org Video Driver, version 20.0 >>>>>> [ 20.996] (II) UnloadModule: "intel" >>>>>> [ 20.996] (II) Unloading intel >>>>>> [ 20.996] (II) Failed to load module "intel" (already loaded, >>>> 22067) >>>>>> [ 20.996] (II) LoadModule: "nvidia" >>>>>> [ 20.996] (WW) Warning, couldn't open module nvidia >>>>>> [ 20.996] (II) UnloadModule: "nvidia" >>>>>> [ 20.996] (II) Unloading nvidia >>>>>> [ 20.996] (EE) Failed to load module "nvidia" (module does not >>>> exist, 0) >>>>>> [ 20.996] (II) LoadModule: "nouveau" >>>>>> [ 20.996] (II) Loading >>>> /usr/lib/xorg/modules/drivers/nouveau_drv.so >>>>>> [ 20.996] (II) Module nouveau: vendor="X.Org Foundation" >>>>>> [ 20.996] compiled for 1.18.3, module version = 1.0.13 >>>>>> [ 20.996] Module class: X.Org Video Driver >>>>>> [ 20.996] ABI class: X.Org Video Driver, version 20.0 >>>>>> [ 20.996] (II) UnloadModule: "nouveau" >>>>>> [ 20.996] (II) Unloading nouveau >>>>>> [ 20.996] (II) Failed to load module "nouveau" (already loaded, >>>> 0) >>>>>> [ 20.996] (II) LoadModule: "modesetting" >>>>>> [ 20.996] (II) Loading >>>> /usr/lib/xorg/modules/drivers/modesetting_drv.so >>>>>> [ 20.996] (II) Module modesetting: vendor="X.Org Foundation" >>>>>> [ 20.996] compiled for 1.18.4, module version = 1.18.4 >>>>>> [ 20.996] Module class: X.Org Video Driver >>>>>> [ 20.996] ABI class: X.Org Video Driver, version 20.0 >>>>>> [ 20.996] (II) UnloadModule: "modesetting" >>>>>> [ 20.996] (II) Unloading modesetting >>>>>> [ 20.996] (II) Failed to load module "modesetting" (already >>>> loaded, 0) >>>>>> [ 20.996] (II) LoadModule: "fbdev" >>>>>> [ 20.996] (WW) Warning, couldn't open module fbdev >>>>>> [ 20.996] (II) UnloadModule: "fbdev" >>>>>> [ 20.996] (II) Unloading fbdev >>>>>> [ 20.996] (EE) Failed to load module "fbdev" (module does not >>>> exist, 0) >>>>>> [ 20.996] (II) LoadModule: "vesa" >>>>>> [ 20.997] (WW) Warning, couldn't open module vesa >>>>>> [ 20.997] (II) UnloadModule: "vesa" >>>>>> [ 20.997] (II) Unloading vesa >>>>>> [ 20.997] (EE) Failed to load module "vesa" (module does not >>>> exist, 0) >>>>>> [ 20.997] (II) intel: Driver for Intel(R) Integrated Graphics >>>> Chipsets: >>>>>> i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, >>>>>> 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, >>>>>> Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, >>>> Q33, >>>>>> GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 >>>>>> [ 20.997] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000 >>>>>> [ 20.997] (II) intel: Driver for Intel(R) Iris(TM) Graphics: >>>> 5100, 6100 >>>>>> [ 20.997] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: >>>> 5200, 6200, P6300 >>>>>> [ 20.997] (II) NOUVEAU driver >>>>>> [ 20.997] (II) NOUVEAU driver for NVIDIA chipset families : >>>>>> [ 20.997] RIVA TNT (NV04) >>>>>> [ 20.997] RIVA TNT2 (NV05) >>>>>> [ 20.997] GeForce 256 (NV10) >>>>>> [ 20.997] GeForce 2 (NV11, NV15) >>>>>> [ 20.997] GeForce 4MX (NV17, NV18) >>>>>> [ 20.997] GeForce 3 (NV20) >>>>>> [ 20.997] GeForce 4Ti (NV25, NV28) >>>>>> [ 20.997] GeForce FX (NV3x) >>>>>> [ 20.997] GeForce 6 (NV4x) >>>>>> [ 20.997] GeForce 7 (G7x) >>>>>> [ 20.997] GeForce 8 (G8x) >>>>>> [ 20.997] GeForce GTX 200 (NVA0) >>>>>> [ 20.997] GeForce GTX 400 (NVC0) >>>>>> [ 20.997] (II) modesetting: Driver for Modesetting Kernel >>>> Drivers: kms >>>>>> [ 21.020] (II) intel(0): Using Kernel Mode Setting driver: i915, >>>> version 1.6.0 20160919 >>>>>> [ 21.020] (II) intel(0): SNA compiled: xserver-xorg-video-intel >>>> 2:2.99.917+git1610121931.eb01cc~gd~x (Oibaf <fmrum...@gmail.com>) >>>>>> [ 21.020] (II) intel(0): SNA compiled for use with valgrind >>>>>> [ 21.022] (II) [drm] nouveau interface version: 1.3.1 >>>>>> [ 21.022] (EE) Unknown chipset: NV118 >>>>>> [ 21.022] (WW) Falling back to old probe method for modesetting >>>>>> [ 21.024] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD >>>> Graphics 5500 >>>>>> [ 21.024] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, >>>> sse4.2, avx, avx2; using a maximum of 2 threads >>>>>> [ 21.024] (II) intel(0): Creating default Display subsection in >>>> Screen section >>>>>> "Default Screen Section" for depth/fbbpp 24/32 >>>>>> [ 21.024] (==) intel(0): Depth 24, (--) framebuffer bpp 32 >>>>>> [ 21.024] (==) intel(0): RGB weight 888 >>>>>> [ 21.024] (==) intel(0): Default visual is TrueColor >>>>>> [ 21.024] (II) intel(0): Output eDP1 has no monitor section >>>>>> [ 21.052] (--) intel(0): Found backlight control interface >>>> intel_backlight (type 'raw') for output eDP1 >>>>>> [ 21.052] (II) intel(0): Enabled output eDP1 >>>>>> [ 21.052] (II) intel(0): Output DP1 has no monitor section >>>>>> [ 21.052] (II) intel(0): Enabled output DP1 >>>>>> [ 21.052] (II) intel(0): Output HDMI1 has no monitor section >>>>>> [ 21.052] (II) intel(0): Enabled output HDMI1 >>>>>> [ 21.052] (II) intel(0): Output DP2 has no monitor section >>>>>> [ 21.052] (II) intel(0): Enabled output DP2 >>>>>> [ 21.052] (II) intel(0): Output HDMI2 has no monitor section >>>>>> [ 21.052] (II) intel(0): Enabled output HDMI2 >>>>>> [ 21.052] (--) intel(0): Using a maximum size of 256x256 for >>>> hardware cursors >>>>>> [ 21.052] (II) intel(0): Output VIRTUAL1 has no monitor section >>>>>> [ 21.052] (II) intel(0): Enabled output VIRTUAL1 >>>>>> [ 21.052] (--) intel(0): Output eDP1 using initial mode 2880x1620 >>>> on pipe 0 >>>>>> [ 21.052] (--) intel(0): Output DP1 using initial mode 2560x1440 >>>> on pipe 1 >>>>>> [ 21.052] (==) intel(0): TearFree enabled >>>>>> [ 21.052] (==) intel(0): DPI set to (96, 96) >>>>>> [ 21.052] (II) Loading sub module "dri2" >>>>>> [ 21.052] (II) LoadModule: "dri2" >>>>>> [ 21.053] (II) Module "dri2" already built-in >>>>>> [ 21.053] (II) Loading sub module "present" >>>>>> [ 21.053] (II) LoadModule: "present" >>>>>> [ 21.053] (II) Module "present" already built-in >>>>>> [ 21.053] (==) Depth 24 pixmap format is 32 bpp >>>>>> [ 21.058] (II) intel(0): SNA initialized with Broadwell (gen8) >>>> backend >>>>>> [ 21.058] (==) intel(0): Backing store enabled >>>>>> [ 21.058] (==) intel(0): Silken mouse enabled >>>>>> [ 21.060] (II) intel(0): HW Cursor enabled >>>>>> [ 21.060] (II) intel(0): RandR 1.2 enabled, ignore the following >>>> RandR disabled message. >>>>>> [ 21.061] (==) intel(0): DPMS enabled >>>>>> [ 21.061] (==) intel(0): Display hotplug detection enabled >>>>>> [ 21.061] (II) intel(0): [DRI2] Setup complete >>>>>> [ 21.061] (II) intel(0): [DRI2] DRI driver: i965 >>>>>> [ 21.061] (II) intel(0): [DRI2] VDPAU driver: va_gl >>>>>> [ 21.061] (II) intel(0): direct rendering: DRI2 enabled >>>>>> [ 21.061] (II) intel(0): hardware support for Present enabled >>>>>> [ 21.061] (--) RandR disabled >>>>>> [ 21.067] (II) SELinux: Disabled on system >>>>>> [ 21.115] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer >>>>>> [ 21.115] (II) AIGLX: enabled GLX_ARB_create_context >>>>>> [ 21.115] (II) AIGLX: enabled GLX_ARB_create_context_profile >>>>>> [ 21.115] (II) AIGLX: enabled >>>> GLX_EXT_create_context_es{,2}_profile >>>>>> [ 21.115] (II) AIGLX: enabled GLX_INTEL_swap_event >>>>>> [ 21.115] (II) AIGLX: enabled GLX_SGI_swap_control and >>>> GLX_MESA_swap_control >>>>>> [ 21.115] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB >>>>>> [ 21.115] (II) AIGLX: enabled GLX_ARB_fbconfig_float >>>>>> [ 21.115] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float >>>>>> [ 21.115] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by >>>> buffer objects >>>>>> [ 21.115] (II) AIGLX: enabled GLX_ARB_create_context_robustness >>>>>> [ 21.116] (II) AIGLX: Loaded and initialized i965 >>>>>> [ 21.116] (II) GLX: Initialized DRI2 GL provider for screen 0 >>>>>> [ 21.125] (II) intel(0): switch to mode 2880x1620@60.0 on eDP1 >>>> using pipe 0, position (0, 0), rotation normal, reflection none >>>>>> [ 21.126] (II) intel(0): switch to mode 2560x1440@60.0 on DP1 >>>> using pipe 1, position (0, 0), rotation normal, reflection none >>>>>> [ 21.127] (II) intel(0): Setting screen physical size to 762 x >>>> 428 >>>>>> [ 21.271] (II) config/udev: Adding input device Power Button >>>> (/dev/input/event3) >>>>>> [ 21.276] (**) Power Button: Applying InputClass "evdev keyboard >>>> catchall" >>>>>> [ 21.276] (II) LoadModule: "evdev" >>>>>> [ 21.276] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so >>>>>> [ 21.279] (II) Module evdev: vendor="X.Org Foundation" >>>>>> [ 21.280] compiled for 1.18.1, module version = 2.10.1 >>>>>> [ 21.280] Module class: X.Org XInput Driver >>>>>> [ 21.280] ABI class: X.Org XInput driver, version 22.1 >>>>>> [ 21.280] (II) Using input driver 'evdev' for 'Power Button' >>>>>> [ 21.280] (**) Power Button: always reports core events >>>>>> [ 21.280] (**) evdev: Power Button: Device: "/dev/input/event3" >>>>>> [ 21.280] (--) evdev: Power Button: Vendor 0 Product 0x1 >>>>>> [ 21.280] (--) evdev: Power Button: Found keys >>>>>> [ 21.280] (II) evdev: Power Button: Configuring as keyboard >>>>>> [ 21.280] (**) Option "config_info" >>>> "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3" >>>>>> [ 21.280] (II) XINPUT: Adding extended input device "Power >>>> Button" (type: KEYBOARD, id 6) >>>>>> [ 21.280] (**) Option "xkb_rules" "evdev" >>>>>> [ 21.280] (**) Option "xkb_model" "pc105" >>>>>> [ 21.280] (**) Option "xkb_layout" "dk" >>>>>> [ 21.359] (II) config/udev: Adding input device Video Bus >>>> (/dev/input/event15) >>>>>> [ 21.359] (**) Video Bus: Applying InputClass "evdev keyboard >>>> catchall" >>>>>> [ 21.359] (II) Using input driver 'evdev' for 'Video Bus' >>>>>> [ 21.359] (**) Video Bus: always reports core events >>>>>> [ 21.359] (**) evdev: Video Bus: Device: "/dev/input/event15" >>>>>> [ 21.359] (--) evdev: Video Bus: Vendor 0 Product 0x6 >>>>>> [ 21.359] (--) evdev: Video Bus: Found keys >>>>>> [ 21.359] (II) evdev: Video Bus: Configuring as keyboard >>>>>> [ 21.359] (**) Option "config_info" >>>> "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16/event15" >>>>>> [ 21.359] (II) XINPUT: Adding extended input device "Video Bus" >>>> (type: KEYBOARD, id 7) >>>>>> [ 21.359] (**) Option "xkb_rules" "evdev" >>>>>> [ 21.359] (**) Option "xkb_model" "pc105" >>>>>> [ 21.359] (**) Option "xkb_layout" "dk" >>>>>> [ 21.359] (II) config/udev: Adding input device Video Bus >>>> (/dev/input/event16) >>>>>> [ 21.359] (**) Video Bus: Applying InputClass "evdev keyboard >>>> catchall" >>>>>> [ 21.361] (II) Using input driver 'evdev' for 'Video Bus' >>>>>> [ 21.361] (**) Video Bus: always reports core events >>>>>> [ 21.361] (**) evdev: Video Bus: Device: "/dev/input/event16" >>>>>> [ 21.361] (--) evdev: Video Bus: Vendor 0 Product 0x6 >>>>>> [ 21.361] (--) evdev: Video Bus: Found keys >>>>>> [ 21.361] (II) evdev: Video Bus: Configuring as keyboard >>>>>> [ 21.361] (**) Option "config_info" >>>> "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input17/event16" >>>>>> [ 21.361] (II) XINPUT: Adding extended input device "Video Bus" >>>> (type: KEYBOARD, id 8) >>>>>> [ 21.361] (**) Option "xkb_rules" "evdev" >>>>>> [ 21.361] (**) Option "xkb_model" "pc105" >>>>>> [ 21.361] (**) Option "xkb_layout" "dk" >>>>>> [ 21.362] (II) config/udev: Adding input device Lid Switch >>>> (/dev/input/event1) >>>>>> [ 21.362] (II) No input driver specified, ignoring this device. >>>>>> [ 21.362] (II) This device may have been added with another >>>> device file. >>>>>> [ 21.362] (II) config/udev: Adding input device Sleep Button >>>> (/dev/input/event2) >>>>>> [ 21.362] (**) Sleep Button: Applying InputClass "evdev keyboard >>>> catchall" >>>>>> [ 21.362] (II) Using input driver 'evdev' for 'Sleep Button' >>>>>> [ 21.362] (**) Sleep Button: always reports core events >>>>>> [ 21.362] (**) evdev: Sleep Button: Device: "/dev/input/event2" >>>>>> [ 21.362] (--) evdev: Sleep Button: Vendor 0 Product 0x3 >>>>>> [ 21.364] (--) evdev: Sleep Button: Found keys >>>>>> [ 21.364] (II) evdev: Sleep Button: Configuring as keyboard >>>>>> [ 21.364] (**) Option "config_info" >>>> "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event2" >>>>>> [ 21.364] (II) XINPUT: Adding extended input device "Sleep >>>> Button" (type: KEYBOARD, id 9) >>>>>> [ 21.364] (**) Option "xkb_rules" "evdev" >>>>>> [ 21.364] (**) Option "xkb_model" "pc105" >>>>>> [ 21.364] (**) Option "xkb_layout" "dk" >>>>>> [ 21.365] (II) config/udev: Adding input device HDA Intel HDMI >>>> HDMI/DP,pcm=3 (/dev/input/event18) >>>>>> [ 21.365] (II) No input driver specified, ignoring this device. >>>>>> [ 21.365] (II) This device may have been added with another >>>> device file. >>>>>> [ 21.365] (II) config/udev: Adding input device HDA Intel HDMI >>>> HDMI/DP,pcm=7 (/dev/input/event19) >>>>>> [ 21.365] (II) No input driver specified, ignoring this device. >>>>>> [ 21.365] (II) This device may have been added with another >>>> device file. >>>>>> [ 21.365] (II) config/udev: Adding input device HDA Intel HDMI >>>> HDMI/DP,pcm=8 (/dev/input/event20) >>>>>> [ 21.365] (II) No input driver specified, ignoring this device. >>>>>> [ 21.365] (II) This device may have been added with another >>>> device file. >>>>>> [ 21.366] (II) config/udev: Adding input device Logitech M705 >>>> (/dev/input/event4) >>>>>> [ 21.366] (**) Logitech M705: Applying InputClass "evdev pointer >>>> catchall" >>>>>> [ 21.366] (II) Using input driver 'evdev' for 'Logitech M705' >>>>>> [ 21.366] (**) Logitech M705: always reports core events >>>>>> [ 21.366] (**) evdev: Logitech M705: Device: "/dev/input/event4" >>>>>> [ 21.366] (--) evdev: Logitech M705: Vendor 0x46d Product 0x101b >>>>>> [ 21.366] (--) evdev: Logitech M705: Found 20 mouse buttons >>>>>> [ 21.366] (--) evdev: Logitech M705: Found scroll wheel(s) >>>>>> [ 21.366] (--) evdev: Logitech M705: Found relative axes >>>>>> [ 21.366] (--) evdev: Logitech M705: Found x and y relative axes >>>>>> [ 21.366] (II) evdev: Logitech M705: Configuring as mouse >>>>>> [ 21.366] (II) evdev: Logitech M705: Adding scrollwheel support >>>>>> [ 21.366] (**) evdev: Logitech M705: YAxisMapping: buttons 4 and >>>> 5 >>>>>> [ 21.366] (**) evdev: Logitech M705: EmulateWheelButton: 4, >>>> EmulateWheelInertia: 10, EmulateWheelTimeout: 200 >>>>>> [ 21.366] (**) Option "config_info" >>>> "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.2/0003:046D:C52B.0003/0003:046D:101B.0004/input/input6/event4" >>>>>> [ 21.366] (II) XINPUT: Adding extended input device "Logitech >>>> M705" (type: MOUSE, id 10) >>>>>> [ 21.366] (II) evdev: Logitech M705: initialized for relative >>>> axes. >>>>>> [ 21.366] (**) Logitech M705: (accel) keeping acceleration scheme >>>> 1 >>>>>> [ 21.366] (**) Logitech M705: (accel) acceleration profile 0 >>>>>> [ 21.366] (**) Logitech M705: (accel) acceleration factor: 2.000 >>>>>> [ 21.366] (**) Logitech M705: (accel) acceleration threshold: 4 >>>>>> [ 21.367] (II) config/udev: Adding input device Logitech M705 >>>> (/dev/input/mouse0) >>>>>> [ 21.367] (II) No input driver specified, ignoring this device. >>>>>> [ 21.367] (II) This device may have been added with another >>>> device file. >>>>>> [ 21.367] (II) config/udev: Adding input device Lite-On >>>> Technology USB Productivity Option Keyboard( has the hub in # 1 ) >>>> (/dev/input/event6) >>>>>> [ 21.367] (**) Lite-On Technology USB Productivity Option >>>> Keyboard( has the hub in # 1 ): Applying InputClass "evdev keyboard >>>> catchall" >>>>>> [ 21.367] (II) Using input driver 'evdev' for 'Lite-On Technology >>>> USB Productivity Option Keyboard( has the hub in # 1 )' >>>>>> [ 21.367] (**) Lite-On Technology USB Productivity Option >>>> Keyboard( has the hub in # 1 ): always reports core events >>>>>> [ 21.367] (**) evdev: Lite-On Technology USB Productivity Option >>>> Keyboard( has the hub in # 1 ): Device: "/dev/input/event6" >>>>>> [ 21.367] (--) evdev: Lite-On Technology USB Productivity Option >>>> Keyboard( has the hub in # 1 ): Vendor 0x4b3 Product 0x301b >>>>>> [ 21.367] (--) evdev: Lite-On Technology USB Productivity Option >>>> Keyboard( has the hub in # 1 ): Found keys >>>>>> [ 21.367] (II) evdev: Lite-On Technology USB Productivity Option >>>> Keyboard( has the hub in # 1 ): Configuring as keyboard >>>>>> [ 21.367] (**) Option "config_info" >>>> "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.2/2-2.2.1/2-2.2.1:1.0/0003:04B3:301B.0005/input/input8/event6" >>>>>> [ 21.367] (II) XINPUT: Adding extended input device "Lite-On >>>> Technology USB Productivity Option Keyboard( has the hub in # 1 )" >>>> (type: KEYBOARD, id 11) >>>>>> [ 21.367] (**) Option "xkb_rules" "evdev" >>>>>> [ 21.367] (**) Option "xkb_model" "pc105" >>>>>> [ 21.367] (**) Option "xkb_layout" "dk" >>>>>> [ 21.368] (II) config/udev: Adding input device Lite-On >>>> Technology USB Productivity Option Keyboard( has the hub in # 1 ) >>>> (/dev/input/event7) >>>>>> [ 21.368] (**) Lite-On Technology USB Productivity Option >>>> Keyboard( has the hub in # 1 ): Applying InputClass "evdev keyboard >>>> catchall" >>>>>> [ 21.368] (II) Using input driver 'evdev' for 'Lite-On Technology >>>> USB Productivity Option Keyboard( has the hub in # 1 )' >>>>>> [ 21.368] (**) Lite-On Technology USB Productivity Option >>>> Keyboard( has the hub in # 1 ): always reports core events >>>>>> [ 21.368] (**) evdev: Lite-On Technology USB Productivity Option >>>> Keyboard( has the hub in # 1 ): Device: "/dev/input/event7" >>>>>> [ 21.368] (--) evdev: Lite-On Technology USB Productivity Option >>>> Keyboard( has the hub in # 1 ): Vendor 0x4b3 Product 0x301b >>>>>> [ 21.368] (--) evdev: Lite-On Technology USB Productivity Option >>>> Keyboard( has the hub in # 1 ): Found keys >>>>>> [ 21.368] (II) evdev: Lite-On Technology USB Productivity Option >>>> Keyboard( has the hub in # 1 ): Configuring as keyboard >>>>>> [ 21.368] (**) Option "config_info" >>>> "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.2/2-2.2.1/2-2.2.1:1.1/0003:04B3:301B.0006/input/input9/event7" >>>>>> [ 21.368] (II) XINPUT: Adding extended input device "Lite-On >>>> Technology USB Productivity Option Keyboard( has the hub in # 1 )" >>>> (type: KEYBOARD, id 12) >>>>>> [ 21.368] (**) Option "xkb_rules" "evdev" >>>>>> [ 21.368] (**) Option "xkb_model" "pc105" >>>>>> [ 21.368] (**) Option "xkb_layout" "dk" >>>>>> [ 21.369] (II) config/udev: Adding input device Integrated Camera >>>> (/dev/input/event17) >>>>>> [ 21.369] (**) Integrated Camera: Applying InputClass "evdev >>>> keyboard catchall" >>>>>> [ 21.369] (II) Using input driver 'evdev' for 'Integrated Camera' >>>>>> [ 21.369] (**) Integrated Camera: always reports core events >>>>>> [ 21.369] (**) evdev: Integrated Camera: Device: >>>> "/dev/input/event17" >>>>>> [ 21.369] (--) evdev: Integrated Camera: Vendor 0x5986 Product >>>> 0x366 >>>>>> [ 21.369] (--) evdev: Integrated Camera: Found keys >>>>>> [ 21.369] (II) evdev: Integrated Camera: Configuring as keyboard >>>>>> [ 21.369] (**) Option "config_info" >>>> "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input18/event17" >>>>>> [ 21.369] (II) XINPUT: Adding extended input device "Integrated >>>> Camera" (type: KEYBOARD, id 13) >>>>>> [ 21.369] (**) Option "xkb_rules" "evdev" >>>>>> [ 21.369] (**) Option "xkb_model" "pc105" >>>>>> [ 21.369] (**) Option "xkb_layout" "dk" >>>>>> [ 21.370] (II) config/udev: Adding input device HDA Digital >>>> PCBeep (/dev/input/event10) >>>>>> [ 21.370] (II) No input driver specified, ignoring this device. >>>>>> [ 21.370] (II) This device may have been added with another >>>> device file. >>>>>> [ 21.370] (II) config/udev: Adding input device HDA Intel PCH >>>> Dock Mic (/dev/input/event11) >>>>>> [ 21.370] (II) No input driver specified, ignoring this device. >>>>>> [ 21.370] (II) This device may have been added with another >>>> device file. >>>>>> [ 21.370] (II) config/udev: Adding input device HDA Intel PCH Mic >>>> (/dev/input/event12) >>>>>> [ 21.370] (II) No input driver specified, ignoring this device. >>>>>> [ 21.370] (II) This device may have been added with another >>>> device file. >>>>>> [ 21.370] (II) config/udev: Adding input device HDA Intel PCH >>>> Dock Headphone (/dev/input/event13) >>>>>> [ 21.370] (II) No input driver specified, ignoring this device. >>>>>> [ 21.370] (II) This device may have been added with another >>>> device file. >>>>>> [ 21.375] (II) config/udev: Adding input device HDA Intel PCH >>>> Headphone (/dev/input/event14) >>>>>> [ 21.375] (II) No input driver specified, ignoring this device. >>>>>> [ 21.375] (II) This device may have been added with another >>>> device file. >>>>>> [ 21.375] (II) config/udev: Adding input device AT Translated Set >>>> 2 keyboard (/dev/input/event0) >>>>>> [ 21.375] (**) AT Translated Set 2 keyboard: Applying InputClass >>>> "evdev keyboard catchall" >>>>>> [ 21.375] (II) Using input driver 'evdev' for 'AT Translated Set >>>> 2 keyboard' >>>>>> [ 21.375] (**) AT Translated Set 2 keyboard: always reports core >>>> events >>>>>> [ 21.375] (**) evdev: AT Translated Set 2 keyboard: Device: >>>> "/dev/input/event0" >>>>>> [ 21.375] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 >>>> Product 0x1 >>>>>> [ 21.375] (--) evdev: AT Translated Set 2 keyboard: Found keys >>>>>> [ 21.375] (II) evdev: AT Translated Set 2 keyboard: Configuring >>>> as keyboard >>>>>> [ 21.375] (**) Option "config_info" >>>> "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" >>>>>> [ 21.375] (II) XINPUT: Adding extended input device "AT >>>> Translated Set 2 keyboard" (type: KEYBOARD, id 14) >>>>>> [ 21.375] (**) Option "xkb_rules" "evdev" >>>>>> [ 21.375] (**) Option "xkb_model" "pc105" >>>>>> [ 21.375] (**) Option "xkb_layout" "dk" >>>>>> [ 21.376] (II) config/udev: Adding input device SynPS/2 Synaptics >>>> TouchPad (/dev/input/event5) >>>>>> [ 21.376] (**) SynPS/2 Synaptics TouchPad: Applying InputClass >>>> "evdev touchpad catchall" >>>>>> [ 21.376] (**) SynPS/2 Synaptics TouchPad: Applying InputClass >>>> "evdev touchscreen catchall" >>>>>> [ 21.376] (**) SynPS/2 Synaptics TouchPad: Applying InputClass >>>> "touchpad catchall" >>>>>> [ 21.376] (**) SynPS/2 Synaptics TouchPad: Applying InputClass >>>> "Default clickpad buttons" >>>>>> [ 21.376] (II) LoadModule: "synaptics" >>>>>> [ 21.376] (II) Loading >>>> /usr/lib/xorg/modules/input/synaptics_drv.so >>>>>> [ 21.381] (II) Module synaptics: vendor="X.Org Foundation" >>>>>> [ 21.381] compiled for 1.18.1, module version = 1.8.2 >>>>>> [ 21.381] Module class: X.Org XInput Driver >>>>>> [ 21.381] ABI class: X.Org XInput driver, version 22.1 >>>>>> [ 21.381] (II) Using input driver 'synaptics' for 'SynPS/2 >>>> Synaptics TouchPad' >>>>>> [ 21.381] (**) SynPS/2 Synaptics TouchPad: always reports core >>>> events >>>>>> [ 21.381] (**) Option "Device" "/dev/input/event5" >>>>>> [ 21.464] (II) synaptics: SynPS/2 Synaptics TouchPad: found >>>> clickpad property >>>>>> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis >>>> range 1266 - 5676 (res 45) >>>>>> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis >>>> range 1096 - 4758 (res 68) >>>>>> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure >>>> range 0 - 255 >>>>>> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: finger >>>> width range 0 - 15 >>>>>> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: >>>> left double triple >>>>>> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 >>>> Product 0x7 >>>>>> [ 21.464] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0" >>>>>> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad >>>> found >>>>>> [ 21.464] (**) SynPS/2 Synaptics TouchPad: always reports core >>>> events >>>>>> [ 21.500] (**) Option "config_info" >>>> "udev:/sys/devices/platform/i8042/serio1/input/input5/event5" >>>>>> [ 21.500] (II) XINPUT: Adding extended input device "SynPS/2 >>>> Synaptics TouchPad" (type: TOUCHPAD, id 15) >>>>>> [ 21.500] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) >>>> MinSpeed is now constant deceleration 2.5 >>>>>> [ 21.500] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) >>>> MaxSpeed is now 1.75 >>>>>> [ 21.500] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) >>>> AccelFactor is now 0.035 >>>>>> [ 21.500] (**) SynPS/2 Synaptics TouchPad: (accel) keeping >>>> acceleration scheme 1 >>>>>> [ 21.500] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration >>>> profile 1 >>>>>> [ 21.500] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration >>>> factor: 2.000 >>>>>> [ 21.500] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration >>>> threshold: 4 >>>>>> [ 21.500] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad >>>> found >>>>>> [ 21.500] (II) config/udev: Adding input device SynPS/2 Synaptics >>>> TouchPad (/dev/input/mouse1) >>>>>> [ 21.500] (**) SynPS/2 Synaptics TouchPad: Ignoring device from >>>> InputClass "touchpad ignore duplicates" >>>>>> [ 21.501] (II) config/udev: Adding input device TPPS/2 IBM >>>> TrackPoint (/dev/input/event8) >>>>>> [ 21.501] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev >>>> pointer catchall" >>>>>> [ 21.501] (**) TPPS/2 IBM TrackPoint: Applying InputClass >>>> "trackpoint catchall" >>>>>> [ 21.501] (II) Using input driver 'evdev' for 'TPPS/2 IBM >>>> TrackPoint' >>>>>> [ 21.501] (**) TPPS/2 IBM TrackPoint: always reports core events >>>>>> [ 21.501] (**) evdev: TPPS/2 IBM TrackPoint: Device: >>>> "/dev/input/event8" >>>>>> [ 21.501] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product >>>> 0xa >>>>>> [ 21.501] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse >>>> buttons >>>>>> [ 21.501] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes >>>>>> [ 21.501] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y >>>> relative axes >>>>>> [ 21.501] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse >>>>>> [ 21.501] (**) Option "Emulate3Buttons" "true" >>>>>> [ 21.501] (**) Option "EmulateWheel" "true" >>>>>> [ 21.501] (**) Option "EmulateWheelButton" "2" >>>>>> [ 21.501] (**) Option "YAxisMapping" "4 5" >>>>>> [ 21.501] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: >>>> buttons 4 and 5 >>>>>> [ 21.501] (**) Option "XAxisMapping" "6 7" >>>>>> [ 21.501] (**) evdev: TPPS/2 IBM TrackPoint: XAxisMapping: >>>> buttons 6 and 7 >>>>>> [ 21.501] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: >>>> 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 >>>>>> [ 21.501] (**) Option "config_info" >>>> "udev:/sys/devices/platform/i8042/serio1/serio2/input/input7/event8" >>>>>> [ 21.501] (II) XINPUT: Adding extended input device "TPPS/2 IBM >>>> TrackPoint" (type: MOUSE, id 16) >>>>>> [ 21.501] (II) evdev: TPPS/2 IBM TrackPoint: initialized for >>>> relative axes. >>>>>> [ 21.501] (**) TPPS/2 IBM TrackPoint: (accel) keeping >>>> acceleration scheme 1 >>>>>> [ 21.501] (**) TPPS/2 IBM TrackPoint: (accel) acceleration >>>> profile 0 >>>>>> [ 21.501] (**) TPPS/2 IBM TrackPoint: (accel) acceleration >>>> factor: 2.000 >>>>>> [ 21.501] (**) TPPS/2 IBM TrackPoint: (accel) acceleration >>>> threshold: 4 >>>>>> [ 21.501] (II) config/udev: Adding input device TPPS/2 IBM >>>> TrackPoint (/dev/input/mouse2) >>>>>> [ 21.501] (II) No input driver specified, ignoring this device. >>>>>> [ 21.501] (II) This device may have been added with another >>>> device file. >>>>>> [ 21.502] (II) config/udev: Adding input device ThinkPad Extra >>>> Buttons (/dev/input/event9) >>>>>> [ 21.502] (**) ThinkPad Extra Buttons: Applying InputClass "evdev >>>> keyboard catchall" >>>>>> [ 21.502] (II) Using input driver 'evdev' for 'ThinkPad Extra >>>> Buttons' >>>>>> [ 21.502] (**) ThinkPad Extra Buttons: always reports core events >>>>>> [ 21.502] (**) evdev: ThinkPad Extra Buttons: Device: >>>> "/dev/input/event9" >>>>>> [ 21.502] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa >>>> Product 0x5054 >>>>>> [ 21.502] (--) evdev: ThinkPad Extra Buttons: Found keys >>>>>> [ 21.502] (II) evdev: ThinkPad Extra Buttons: Configuring as >>>> keyboard >>>>>> [ 21.502] (**) Option "config_info" >>>> "udev:/sys/devices/platform/thinkpad_acpi/input/input10/event9" >>>>>> [ 21.502] (II) XINPUT: Adding extended input device "ThinkPad >>>> Extra Buttons" (type: KEYBOARD, id 17) >>>>>> [ 21.502] (**) Option "xkb_rules" "evdev" >>>>>> [ 21.502] (**) Option "xkb_model" "pc105" >>>>>> [ 21.502] (**) Option "xkb_layout" "dk" >>>>>> [ 23.053] (II) intel(0): EDID vendor "MEI", prod id 38562 >>>>>> [ 23.053] (II) intel(0): EDID quirk: Use maximum size instead >>>> of detailed timing sizes. >>>>>> [ 23.053] (II) intel(0): Using EDID range info for horizontal >>>> sync >>>>>> [ 23.053] (II) intel(0): Using EDID range info for vertical >>>> refresh >>>>>> [ 23.053] (II) intel(0): Printing DDC gathered Modelines: >>>>>> [ 23.053] (II) intel(0): Modeline "2880x1620"x0.0 302.50 2880 >>>> 2924 2928 3076 1620 1629 1630 1640 +hsync +vsync (98.3 kHz eP) >>>>>> [ 23.053] (II) intel(0): Modeline "2880x1620"x0.0 302.50 2880 >>>> 2924 2928 3076 1620 1629 1630 1967 +hsync +vsync (98.3 kHz e) >>>>>> [ 23.909] (II) intel(0): resizing framebuffer to 5440x1620 >>>>>> [ 23.960] (II) intel(0): switch to mode 2560x1440@60.0 on DP1 >>>> using pipe 1, position (2880, 0), rotation normal, reflection none >>>>> >>>>> >>>>> >>>>> >>>>> >>>>>> _______________________________________________ >>>>>> Nouveau mailing list >>>>>> Nouveau@lists.freedesktop.org >>>>>> https://lists.freedesktop.org/mailman/listinfo/nouveau >>>>> >>>> >>>> >>>> >>>> >>>> ------------------------------------------------------------------------ >>>> >>>> _______________________________________________ >>>> Nouveau mailing list >>>> Nouveau@lists.freedesktop.org >>>> https://lists.freedesktop.org/mailman/listinfo/nouveau >>> >> _______________________________________________ Nouveau mailing list Nouveau@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/nouveau
