hi, give the drm-next kernel tree a try. Sadly the reclocking improvements didn't land with 4.9, so 4.10 is required.
Greetings. On 7 December 2016 10:26:44 a.m. GMT+01:00, "Sune Mølgaard" <[email protected]> wrote: >Hi again, > >It works :-) > >Reclocking, however, is another kettle of fish. > >Trying #echo 0f > /sys/kernel/debug/dri/0/pstate hangs X. > >Trying the same with no X running reveals: > >Dec 7 10:08:42 dell-smo kernel: [ 728.831020] nouveau 0000:08:00.0: >clk: unable to find matching pll values > >a number of time as then soft lockup. > >Very much akin to >https://people.freedesktop.org/~cbrill/dri-log/?channel=nouveau&date=2016-04-14 >, actually, so what I gather from that is that I need to provide you >guys with some info about the card, so which do you need, and how do I >extract them? > >Best regards, > >Sune Mølgaard > >On 2016-10-27 11:06, Pierre Moreau wrote: >> Hello, >> >> The idea was to use the modesetting DDX instead of Nouveau’s one for >Maxwell+ >> as EXA was [broken][1]. But you can give a try at Ilia’s >[patches][2], which >> fix the Nouveau DDX for GM10x and GM20x (I don’t think it has been >tested on a >> GM108 yet). >> >> Best regards, >> Pierre Moreau >> >> [1]: >https://cgit.freedesktop.org/nouveau/xf86-video-nouveau/commit/?id=3e2e0faa2ee1cce9c1bb5c7ad80d0592460f3edc >> [2]: https://github.com/imirkin/xf86-video-nouveau/ >> >> >> On 11:29 am - Oct 18 2016, Sune Mølgaard wrote: >>> Hi, >>> >>> It would seem like it (attachments are from 4.9-rc1, btw), but it >>> doesn't look like there is any support in the Xorg driver. >>> >>> How can I help with that? >>> >>> Best regards, >>> >>> Sune Mølgaard >>> Translucent ApS >>> >>> On 2016-04-22 09:33, Pierre Moreau wrote: >>>> Hello, >>>> >>>> A patch was merged yesterday to recognise GM108 (see >>>> >https://github.com/skeggsb/nouveau/commit/3da1f2a19e5e8dc8d68a4400d9cca01c64ecd59e). >>>> I guess it will make it into 4.7. >>>> >>>> Pierre >>> >> >>> lspci -vvvv >>> 00:00.0 Host bridge: Intel Corporation Broadwell-U Host Bridge -OPI >(rev 09) >>> Subsystem: Lenovo Broadwell-U Host Bridge -OPI >>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- DisINTx- >>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- ><TAbort- <MAbort+ >SERR- <PERR- INTx- >>> Latency: 0 >>> Capabilities: <access denied> >>> Kernel driver in use: bdw_uncore >>> >>> 00:02.0 VGA compatible controller: Intel Corporation Broadwell-U >Integrated Graphics (rev 09) (prog-if 00 [VGA controller]) >>> Subsystem: Lenovo Broadwell-U Integrated Graphics >>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- DisINTx+ >>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- ><TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0 >>> Interrupt: pin A routed to IRQ 49 >>> Region 0: Memory at f2000000 (64-bit, non-prefetchable) [size=16M] >>> Region 2: Memory at c0000000 (64-bit, prefetchable) [size=512M] >>> Region 4: I/O ports at 4000 [size=64] >>> [virtual] Expansion ROM at 000c0000 [disabled] [size=128K] >>> Capabilities: <access denied> >>> Kernel driver in use: i915 >>> Kernel modules: i915 >>> >>> 00:03.0 Audio device: Intel Corporation Broadwell-U Audio Controller >(rev 09) >>> Subsystem: Lenovo Broadwell-U Audio Controller >>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- DisINTx+ >>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- ><TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0, Cache Line Size: 64 bytes >>> Interrupt: pin A routed to IRQ 50 >>> Region 0: Memory at f4230000 (64-bit, non-prefetchable) [size=16K] >>> Capabilities: <access denied> >>> Kernel driver in use: snd_hda_intel >>> Kernel modules: snd_hda_intel >>> >>> 00:14.0 USB controller: Intel Corporation Wildcat Point-LP USB xHCI >Controller (rev 03) (prog-if 30 [XHCI]) >>> Subsystem: Lenovo Wildcat Point-LP USB xHCI Controller >>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- DisINTx+ >>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- ><TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0 >>> Interrupt: pin A routed to IRQ 42 >>> Region 0: Memory at f4220000 (64-bit, non-prefetchable) [size=64K] >>> Capabilities: <access denied> >>> Kernel driver in use: xhci_hcd >>> >>> 00:16.0 Communication controller: Intel Corporation Wildcat Point-LP >MEI Controller #1 (rev 03) >>> Subsystem: Lenovo Wildcat Point-LP MEI Controller >>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- DisINTx+ >>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- ><TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0 >>> Interrupt: pin A routed to IRQ 46 >>> Region 0: Memory at f4239000 (64-bit, non-prefetchable) [size=32] >>> Capabilities: <access denied> >>> Kernel driver in use: mei_me >>> Kernel modules: mei_me >>> >>> 00:19.0 Ethernet controller: Intel Corporation Ethernet Connection >(3) I218-V (rev 03) >>> Subsystem: Lenovo Ethernet Connection (3) I218-V >>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- DisINTx+ >>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- ><TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0 >>> Interrupt: pin A routed to IRQ 43 >>> Region 0: Memory at f4200000 (32-bit, non-prefetchable) [size=128K] >>> Region 1: Memory at f423e000 (32-bit, non-prefetchable) [size=4K] >>> Region 2: I/O ports at 4080 [size=32] >>> Capabilities: <access denied> >>> Kernel driver in use: e1000e >>> Kernel modules: e1000e >>> >>> 00:1b.0 Audio device: Intel Corporation Wildcat Point-LP High >Definition Audio Controller (rev 03) >>> Subsystem: Lenovo Wildcat Point-LP High Definition Audio Controller >>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- DisINTx+ >>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- ><TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 32, Cache Line Size: 64 bytes >>> Interrupt: pin A routed to IRQ 47 >>> Region 0: Memory at f4234000 (64-bit, non-prefetchable) [size=16K] >>> Capabilities: <access denied> >>> Kernel driver in use: snd_hda_intel >>> Kernel modules: snd_hda_intel >>> >>> 00:1c.0 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express >Root Port #6 (rev e3) (prog-if 00 [Normal decode]) >>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- DisINTx- >>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- ><TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0, Cache Line Size: 64 bytes >>> Interrupt: pin B routed to IRQ 17 >>> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 >>> I/O behind bridge: 0000f000-00000fff >>> Memory behind bridge: f4100000-f41fffff >>> Prefetchable memory behind bridge: >00000000fff00000-00000000000fffff >>> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- ><TAbort- <MAbort+ <SERR- <PERR- >>> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- >>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- >>> Capabilities: <access denied> >>> Kernel driver in use: pcieport >>> Kernel modules: shpchp >>> >>> 00:1c.1 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express >Root Port #3 (rev e3) (prog-if 00 [Normal decode]) >>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- DisINTx- >>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- ><TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0, Cache Line Size: 64 bytes >>> Interrupt: pin C routed to IRQ 18 >>> Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 >>> I/O behind bridge: 0000f000-00000fff >>> Memory behind bridge: f4000000-f40fffff >>> Prefetchable memory behind bridge: >00000000fff00000-00000000000fffff >>> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- ><TAbort- <MAbort+ <SERR- <PERR- >>> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- >>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- >>> Capabilities: <access denied> >>> Kernel driver in use: pcieport >>> Kernel modules: shpchp >>> >>> 00:1c.4 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express >Root Port #5 (rev e3) (prog-if 00 [Normal decode]) >>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- DisINTx- >>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- ><TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0, Cache Line Size: 64 bytes >>> Interrupt: pin A routed to IRQ 16 >>> Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 >>> I/O behind bridge: 00003000-00003fff >>> Memory behind bridge: f3000000-f3ffffff >>> Prefetchable memory behind bridge: >00000000e0000000-00000000f1ffffff >>> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- ><TAbort- <MAbort+ <SERR- <PERR- >>> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- >>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- >>> Capabilities: <access denied> >>> Kernel driver in use: pcieport >>> Kernel modules: shpchp >>> >>> 00:1d.0 USB controller: Intel Corporation Wildcat Point-LP USB EHCI >Controller (rev 03) (prog-if 20 [EHCI]) >>> Subsystem: Lenovo Wildcat Point-LP USB EHCI Controller >>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- DisINTx- >>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- ><TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0 >>> Interrupt: pin A routed to IRQ 23 >>> Region 0: Memory at f423d000 (32-bit, non-prefetchable) [size=1K] >>> Capabilities: <access denied> >>> Kernel driver in use: ehci-pci >>> >>> 00:1f.0 ISA bridge: Intel Corporation Wildcat Point-LP LPC >Controller (rev 03) >>> Subsystem: Lenovo Wildcat Point-LP LPC Controller >>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- DisINTx- >>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- ><TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0 >>> Capabilities: <access denied> >>> Kernel driver in use: lpc_ich >>> Kernel modules: lpc_ich >>> >>> 00:1f.2 SATA controller: Intel Corporation Wildcat Point-LP SATA >Controller [AHCI Mode] (rev 03) (prog-if 01 [AHCI 1.0]) >>> Subsystem: Lenovo Wildcat Point-LP SATA Controller [AHCI Mode] >>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- DisINTx- >>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- ><TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0 >>> Interrupt: pin B routed to IRQ 19 >>> Region 0: I/O ports at 40a8 [size=8] >>> Region 1: I/O ports at 40b4 [size=4] >>> Region 2: I/O ports at 40a0 [size=8] >>> Region 3: I/O ports at 40b0 [size=4] >>> Region 4: I/O ports at 4060 [size=32] >>> Region 5: Memory at f423c000 (32-bit, non-prefetchable) [size=2K] >>> Capabilities: <access denied> >>> Kernel driver in use: ahci >>> Kernel modules: ahci >>> >>> 00:1f.3 SMBus: Intel Corporation Wildcat Point-LP SMBus Controller >(rev 03) >>> Subsystem: Lenovo Wildcat Point-LP SMBus Controller >>> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- DisINTx- >>> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- ><TAbort- <MAbort- >SERR- <PERR- INTx- >>> Interrupt: pin C routed to IRQ 10 >>> Region 0: Memory at f4238000 (64-bit, non-prefetchable) [size=256] >>> Region 4: I/O ports at efa0 [size=32] >>> Kernel modules: i2c_i801 >>> >>> 00:1f.6 Signal processing controller: Intel Corporation Wildcat >Point-LP Thermal Management Controller (rev 03) >>> Subsystem: Lenovo Wildcat Point-LP Thermal Management Controller >>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- DisINTx- >>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- ><TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0 >>> Interrupt: pin C routed to IRQ 18 >>> Region 0: Memory at f423b000 (64-bit, non-prefetchable) [size=4K] >>> Capabilities: <access denied> >>> Kernel driver in use: intel_pch_thermal >>> Kernel modules: intel_pch_thermal >>> >>> 02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. >RTS5227 PCI Express Card Reader (rev 01) >>> Subsystem: Lenovo RTS5227 PCI Express Card Reader >>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- DisINTx+ >>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- ><TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0, Cache Line Size: 64 bytes >>> Interrupt: pin A routed to IRQ 44 >>> Region 0: Memory at f4100000 (32-bit, non-prefetchable) [size=4K] >>> Capabilities: <access denied> >>> Kernel driver in use: rtsx_pci >>> Kernel modules: rtsx_pci >>> >>> 03:00.0 Network controller: Intel Corporation Wireless 7265 (rev 99) >>> Subsystem: Intel Corporation Dual Band Wireless-AC 7265 >>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- DisINTx+ >>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- ><TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0, Cache Line Size: 64 bytes >>> Interrupt: pin A routed to IRQ 48 >>> Region 0: Memory at f4000000 (64-bit, non-prefetchable) [size=8K] >>> Capabilities: <access denied> >>> Kernel driver in use: iwlwifi >>> Kernel modules: iwlwifi >>> >>> 08:00.0 3D controller: NVIDIA Corporation GM108GLM [Quadro K620M] >(rev a2) >>> Subsystem: Lenovo GM108GLM [Quadro K620M] >>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- DisINTx+ >>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- ><TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 0, Cache Line Size: 64 bytes >>> Interrupt: pin A routed to IRQ 45 >>> Region 0: Memory at f3000000 (32-bit, non-prefetchable) [size=16M] >>> Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M] >>> Region 3: Memory at f0000000 (64-bit, prefetchable) [size=32M] >>> Region 5: I/O ports at 3000 [size=128] >>> Expansion ROM at <ignored> [disabled] >>> Capabilities: <access denied> >>> Kernel driver in use: nouveau >>> Kernel modules: nvidiafb, nouveau >>> >> >>> dmesg |egrep -i "nouveau|nvidia" >>> [ 1.893467] nouveau: detected PR support, will not use DSM >>> [ 1.893677] nouveau 0000:08:00.0: NVIDIA GM108 (1183a0a2) >>> [ 1.907342] nouveau 0000:08:00.0: bios: version 82.08.1f.00.03 >>> [ 1.991211] nouveau 0000:08:00.0: priv: HUB0: 6013d4 badf573f >(1d408200) >>> [ 1.991212] nouveau 0000:08:00.0: fb: 2048 MiB DDR3 >>> [ 3.269352] nouveau 0000:08:00.0: DRM: VRAM: 2048 MiB >>> [ 3.269408] nouveau 0000:08:00.0: DRM: GART: 1048576 MiB >>> [ 3.269465] nouveau 0000:08:00.0: DRM: Pointer to TMDS table >invalid >>> [ 3.269523] nouveau 0000:08:00.0: DRM: DCB version 4.0 >>> [ 3.269579] nouveau 0000:08:00.0: DRM: Pointer to flat panel >table invalid >>> [ 3.451054] nouveau 0000:08:00.0: DRM: MM: using COPY for buffer >copies >>> [ 3.451117] [drm] Initialized nouveau 1.3.1 20120801 for >0000:08:00.0 on minor 0 >>> [ 8.925115] nouveau 0000:08:00.0: DRM: evicting buffers... >>> [ 8.925189] nouveau 0000:08:00.0: DRM: waiting for kernel >channels to go idle... >>> [ 8.925283] nouveau 0000:08:00.0: DRM: suspending client object >trees... >>> [ 8.929091] nouveau 0000:08:00.0: DRM: suspending kernel object >tree... >>> [ 17.449259] hid_logitech_hidpp hid_logitech_dj usbhid hid >crct10dif_pclmul rtsx_pci_sdmmc crc32_pclmul crc32c_intel mmc_core >nouveau ghash_clmulni_intel aesni_intel mxm_wmi i2c_algo_bit aes_x86_64 >ttm lrw gf128mul glue_helper drm_kms_helper ablk_helper cryptd >syscopyarea sysfillrect psmouse sysimgblt fb_sys_fops drm ahci libahci >rtsx_pci e1000e ptp pps_core thermal wmi fjes video button >>> [ 18.641499] nouveau 0000:08:00.0: DRM: resuming kernel object >tree... >>> [ 18.724503] nouveau 0000:08:00.0: priv: HUB0: 6013d4 badf573f >(1f408200) >>> [ 18.761491] nouveau 0000:08:00.0: priv: HUB0: 10ecc0 ffffffff >(1d40822c) >>> [ 18.761992] nouveau 0000:08:00.0: DRM: resuming client object >trees... >>> [ 26.025637] nouveau 0000:08:00.0: DRM: evicting buffers... >>> [ 26.025639] nouveau 0000:08:00.0: DRM: waiting for kernel >channels to go idle... >>> [ 26.025662] nouveau 0000:08:00.0: DRM: suspending client object >trees... >>> [ 26.029451] nouveau 0000:08:00.0: DRM: suspending kernel object >tree... >> >>> [ 20.874] >>> X.Org X Server 1.18.4 >>> Release Date: 2016-07-19 >>> [ 20.874] X Protocol Version 11, Revision 0 >>> [ 20.874] Build Operating System: Linux 3.13.0-95-generic x86_64 >Ubuntu >>> [ 20.874] Current Operating System: Linux dell-smo >4.9.0-040900rc1-generic #201610151630 SMP Sat Oct 15 20:33:39 UTC 2016 >x86_64 >>> [ 20.874] Kernel command line: >BOOT_IMAGE=/vmlinuz-4.9.0-040900rc1-generic >root=UUID=a9421b5e-ff3f-4ebd-8f9f-13d24c76ba34 ro >cryptopts=target=sda6_crypt,source=/dev/disk/by-uuid/64096e82-f7f4-4917-80df-e123aa15a022,discard >vt.handoff=7 >>> [ 20.874] Build Date: 14 September 2016 03:33:24PM >>> [ 20.874] xorg-server 2:1.18.4-0ubuntu0.1 (For technical support >please see http://www.ubuntu.com/support) >>> [ 20.874] Current version of pixman: 0.33.6 >>> [ 20.874] Before reporting problems, check http://wiki.x.org >>> to make sure that you have the latest version. >>> [ 20.874] Markers: (--) probed, (**) from config file, (==) >default setting, >>> (++) from command line, (!!) notice, (II) informational, >>> (WW) warning, (EE) error, (NI) not implemented, (??) unknown. >>> [ 20.874] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 18 >09:21:13 2016 >>> [ 20.877] (==) Using system config directory >"/usr/share/X11/xorg.conf.d" >>> [ 20.881] (==) No Layout section. Using the first Screen >section. >>> [ 20.881] (==) No screen section available. Using defaults. >>> [ 20.881] (**) |-->Screen "Default Screen Section" (0) >>> [ 20.881] (**) | |-->Monitor "<default monitor>" >>> [ 20.882] (==) No monitor specified for screen "Default Screen >Section". >>> Using a default monitor configuration. >>> [ 20.882] (==) Automatically adding devices >>> [ 20.882] (==) Automatically enabling devices >>> [ 20.882] (==) Automatically adding GPU devices >>> [ 20.882] (==) Max clients allowed: 256, resource mask: 0x1fffff >>> [ 20.889] (WW) The directory "/usr/share/fonts/X11/cyrillic" does >not exist. >>> [ 20.889] Entry deleted from font path. >>> [ 20.892] (WW) The directory "/usr/share/fonts/X11/75dpi/" does >not exist. >>> [ 20.892] Entry deleted from font path. >>> [ 20.893] (WW) The directory "/usr/share/fonts/X11/75dpi" does >not exist. >>> [ 20.893] Entry deleted from font path. >>> [ 20.893] (==) FontPath set to: >>> /usr/share/fonts/X11/misc, >>> /usr/share/fonts/X11/100dpi/:unscaled, >>> /usr/share/fonts/X11/Type1, >>> /usr/share/fonts/X11/100dpi, >>> built-ins >>> [ 20.893] (==) ModulePath set to >"/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" >>> [ 20.893] (II) The server relies on udev to provide the list of >input devices. >>> If no devices become available, reconfigure udev or disable >AutoAddDevices. >>> [ 20.894] (II) Loader magic: 0x563366d65dc0 >>> [ 20.894] (II) Module ABI versions: >>> [ 20.894] X.Org ANSI C Emulation: 0.4 >>> [ 20.894] X.Org Video Driver: 20.0 >>> [ 20.894] X.Org XInput driver : 22.1 >>> [ 20.894] X.Org Server Extension : 9.0 >>> [ 20.895] (++) using VT number 7 >>> >>> [ 20.895] (II) systemd-logind: logind integration requires >-keeptty and -keeptty was not provided, disabling logind integration >>> [ 20.895] (II) xfree86: Adding drm device (/dev/dri/card1) >>> [ 20.910] (II) xfree86: Adding drm device (/dev/dri/card0) >>> [ 20.912] (--) PCI:*(0:0:2:0) 8086:1616:17aa:2225 rev 9, Mem @ >0xf2000000/16777216, 0xc0000000/536870912, I/O @ 0x00004000/64, BIOS @ >0x????????/131072 >>> [ 20.912] (--) PCI: (0:8:0:0) 10de:137a:17aa:2225 rev 162, Mem @ >0xf3000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ >0x00003000/128 >>> [ 20.912] (II) LoadModule: "glx" >>> [ 20.936] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so >>> [ 20.980] (II) Module glx: vendor="X.Org Foundation" >>> [ 20.980] compiled for 1.18.4, module version = 1.0.0 >>> [ 20.980] ABI class: X.Org Server Extension, version 9.0 >>> [ 20.980] (==) AIGLX enabled >>> [ 20.980] (==) Matched intel as autoconfigured driver 0 >>> [ 20.980] (==) Matched nvidia as autoconfigured driver 1 >>> [ 20.980] (==) Matched nouveau as autoconfigured driver 2 >>> [ 20.980] (==) Matched intel as autoconfigured driver 3 >>> [ 20.980] (==) Matched modesetting as autoconfigured driver 4 >>> [ 20.980] (==) Matched fbdev as autoconfigured driver 5 >>> [ 20.980] (==) Matched vesa as autoconfigured driver 6 >>> [ 20.980] (==) Assigned the driver to the xf86ConfigLayout >>> [ 20.980] (II) LoadModule: "intel" >>> [ 20.983] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so >>> [ 20.988] (II) Module intel: vendor="X.Org Foundation" >>> [ 20.988] compiled for 1.18.4, module version = 2.99.917 >>> [ 20.988] Module class: X.Org Video Driver >>> [ 20.988] ABI class: X.Org Video Driver, version 20.0 >>> [ 20.988] (II) LoadModule: "nvidia" >>> [ 20.991] (WW) Warning, couldn't open module nvidia >>> [ 20.991] (II) UnloadModule: "nvidia" >>> [ 20.991] (II) Unloading nvidia >>> [ 20.991] (EE) Failed to load module "nvidia" (module does not >exist, 0) >>> [ 20.991] (II) LoadModule: "nouveau" >>> [ 20.991] (II) Loading >/usr/lib/xorg/modules/drivers/nouveau_drv.so >>> [ 20.994] (II) Module nouveau: vendor="X.Org Foundation" >>> [ 20.994] compiled for 1.18.3, module version = 1.0.13 >>> [ 20.994] Module class: X.Org Video Driver >>> [ 20.994] ABI class: X.Org Video Driver, version 20.0 >>> [ 20.994] (II) LoadModule: "modesetting" >>> [ 20.994] (II) Loading >/usr/lib/xorg/modules/drivers/modesetting_drv.so >>> [ 20.995] (II) Module modesetting: vendor="X.Org Foundation" >>> [ 20.995] compiled for 1.18.4, module version = 1.18.4 >>> [ 20.995] Module class: X.Org Video Driver >>> [ 20.995] ABI class: X.Org Video Driver, version 20.0 >>> [ 20.995] (II) LoadModule: "fbdev" >>> [ 20.995] (WW) Warning, couldn't open module fbdev >>> [ 20.995] (II) UnloadModule: "fbdev" >>> [ 20.995] (II) Unloading fbdev >>> [ 20.995] (EE) Failed to load module "fbdev" (module does not >exist, 0) >>> [ 20.995] (II) LoadModule: "vesa" >>> [ 20.995] (WW) Warning, couldn't open module vesa >>> [ 20.995] (II) UnloadModule: "vesa" >>> [ 20.995] (II) Unloading vesa >>> [ 20.995] (EE) Failed to load module "vesa" (module does not >exist, 0) >>> [ 20.995] (==) Matched intel as autoconfigured driver 0 >>> [ 20.995] (==) Matched nvidia as autoconfigured driver 1 >>> [ 20.995] (==) Matched nouveau as autoconfigured driver 2 >>> [ 20.995] (==) Matched intel as autoconfigured driver 3 >>> [ 20.995] (==) Matched modesetting as autoconfigured driver 4 >>> [ 20.995] (==) Matched fbdev as autoconfigured driver 5 >>> [ 20.995] (==) Matched vesa as autoconfigured driver 6 >>> [ 20.995] (==) Assigned the driver to the xf86ConfigLayout >>> [ 20.995] (II) LoadModule: "intel" >>> [ 20.996] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so >>> [ 20.996] (II) Module intel: vendor="X.Org Foundation" >>> [ 20.996] compiled for 1.18.4, module version = 2.99.917 >>> [ 20.996] Module class: X.Org Video Driver >>> [ 20.996] ABI class: X.Org Video Driver, version 20.0 >>> [ 20.996] (II) UnloadModule: "intel" >>> [ 20.996] (II) Unloading intel >>> [ 20.996] (II) Failed to load module "intel" (already loaded, >22067) >>> [ 20.996] (II) LoadModule: "nvidia" >>> [ 20.996] (WW) Warning, couldn't open module nvidia >>> [ 20.996] (II) UnloadModule: "nvidia" >>> [ 20.996] (II) Unloading nvidia >>> [ 20.996] (EE) Failed to load module "nvidia" (module does not >exist, 0) >>> [ 20.996] (II) LoadModule: "nouveau" >>> [ 20.996] (II) Loading >/usr/lib/xorg/modules/drivers/nouveau_drv.so >>> [ 20.996] (II) Module nouveau: vendor="X.Org Foundation" >>> [ 20.996] compiled for 1.18.3, module version = 1.0.13 >>> [ 20.996] Module class: X.Org Video Driver >>> [ 20.996] ABI class: X.Org Video Driver, version 20.0 >>> [ 20.996] (II) UnloadModule: "nouveau" >>> [ 20.996] (II) Unloading nouveau >>> [ 20.996] (II) Failed to load module "nouveau" (already loaded, >0) >>> [ 20.996] (II) LoadModule: "modesetting" >>> [ 20.996] (II) Loading >/usr/lib/xorg/modules/drivers/modesetting_drv.so >>> [ 20.996] (II) Module modesetting: vendor="X.Org Foundation" >>> [ 20.996] compiled for 1.18.4, module version = 1.18.4 >>> [ 20.996] Module class: X.Org Video Driver >>> [ 20.996] ABI class: X.Org Video Driver, version 20.0 >>> [ 20.996] (II) UnloadModule: "modesetting" >>> [ 20.996] (II) Unloading modesetting >>> [ 20.996] (II) Failed to load module "modesetting" (already >loaded, 0) >>> [ 20.996] (II) LoadModule: "fbdev" >>> [ 20.996] (WW) Warning, couldn't open module fbdev >>> [ 20.996] (II) UnloadModule: "fbdev" >>> [ 20.996] (II) Unloading fbdev >>> [ 20.996] (EE) Failed to load module "fbdev" (module does not >exist, 0) >>> [ 20.996] (II) LoadModule: "vesa" >>> [ 20.997] (WW) Warning, couldn't open module vesa >>> [ 20.997] (II) UnloadModule: "vesa" >>> [ 20.997] (II) Unloading vesa >>> [ 20.997] (EE) Failed to load module "vesa" (module does not >exist, 0) >>> [ 20.997] (II) intel: Driver for Intel(R) Integrated Graphics >Chipsets: >>> i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, >>> 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, >>> Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, >Q33, >>> GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 >>> [ 20.997] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000 >>> [ 20.997] (II) intel: Driver for Intel(R) Iris(TM) Graphics: >5100, 6100 >>> [ 20.997] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: >5200, 6200, P6300 >>> [ 20.997] (II) NOUVEAU driver >>> [ 20.997] (II) NOUVEAU driver for NVIDIA chipset families : >>> [ 20.997] RIVA TNT (NV04) >>> [ 20.997] RIVA TNT2 (NV05) >>> [ 20.997] GeForce 256 (NV10) >>> [ 20.997] GeForce 2 (NV11, NV15) >>> [ 20.997] GeForce 4MX (NV17, NV18) >>> [ 20.997] GeForce 3 (NV20) >>> [ 20.997] GeForce 4Ti (NV25, NV28) >>> [ 20.997] GeForce FX (NV3x) >>> [ 20.997] GeForce 6 (NV4x) >>> [ 20.997] GeForce 7 (G7x) >>> [ 20.997] GeForce 8 (G8x) >>> [ 20.997] GeForce GTX 200 (NVA0) >>> [ 20.997] GeForce GTX 400 (NVC0) >>> [ 20.997] (II) modesetting: Driver for Modesetting Kernel >Drivers: kms >>> [ 21.020] (II) intel(0): Using Kernel Mode Setting driver: i915, >version 1.6.0 20160919 >>> [ 21.020] (II) intel(0): SNA compiled: xserver-xorg-video-intel >2:2.99.917+git1610121931.eb01cc~gd~x (Oibaf <[email protected]>) >>> [ 21.020] (II) intel(0): SNA compiled for use with valgrind >>> [ 21.022] (II) [drm] nouveau interface version: 1.3.1 >>> [ 21.022] (EE) Unknown chipset: NV118 >>> [ 21.022] (WW) Falling back to old probe method for modesetting >>> [ 21.024] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD >Graphics 5500 >>> [ 21.024] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, >sse4.2, avx, avx2; using a maximum of 2 threads >>> [ 21.024] (II) intel(0): Creating default Display subsection in >Screen section >>> "Default Screen Section" for depth/fbbpp 24/32 >>> [ 21.024] (==) intel(0): Depth 24, (--) framebuffer bpp 32 >>> [ 21.024] (==) intel(0): RGB weight 888 >>> [ 21.024] (==) intel(0): Default visual is TrueColor >>> [ 21.024] (II) intel(0): Output eDP1 has no monitor section >>> [ 21.052] (--) intel(0): Found backlight control interface >intel_backlight (type 'raw') for output eDP1 >>> [ 21.052] (II) intel(0): Enabled output eDP1 >>> [ 21.052] (II) intel(0): Output DP1 has no monitor section >>> [ 21.052] (II) intel(0): Enabled output DP1 >>> [ 21.052] (II) intel(0): Output HDMI1 has no monitor section >>> [ 21.052] (II) intel(0): Enabled output HDMI1 >>> [ 21.052] (II) intel(0): Output DP2 has no monitor section >>> [ 21.052] (II) intel(0): Enabled output DP2 >>> [ 21.052] (II) intel(0): Output HDMI2 has no monitor section >>> [ 21.052] (II) intel(0): Enabled output HDMI2 >>> [ 21.052] (--) intel(0): Using a maximum size of 256x256 for >hardware cursors >>> [ 21.052] (II) intel(0): Output VIRTUAL1 has no monitor section >>> [ 21.052] (II) intel(0): Enabled output VIRTUAL1 >>> [ 21.052] (--) intel(0): Output eDP1 using initial mode 2880x1620 >on pipe 0 >>> [ 21.052] (--) intel(0): Output DP1 using initial mode 2560x1440 >on pipe 1 >>> [ 21.052] (==) intel(0): TearFree enabled >>> [ 21.052] (==) intel(0): DPI set to (96, 96) >>> [ 21.052] (II) Loading sub module "dri2" >>> [ 21.052] (II) LoadModule: "dri2" >>> [ 21.053] (II) Module "dri2" already built-in >>> [ 21.053] (II) Loading sub module "present" >>> [ 21.053] (II) LoadModule: "present" >>> [ 21.053] (II) Module "present" already built-in >>> [ 21.053] (==) Depth 24 pixmap format is 32 bpp >>> [ 21.058] (II) intel(0): SNA initialized with Broadwell (gen8) >backend >>> [ 21.058] (==) intel(0): Backing store enabled >>> [ 21.058] (==) intel(0): Silken mouse enabled >>> [ 21.060] (II) intel(0): HW Cursor enabled >>> [ 21.060] (II) intel(0): RandR 1.2 enabled, ignore the following >RandR disabled message. >>> [ 21.061] (==) intel(0): DPMS enabled >>> [ 21.061] (==) intel(0): Display hotplug detection enabled >>> [ 21.061] (II) intel(0): [DRI2] Setup complete >>> [ 21.061] (II) intel(0): [DRI2] DRI driver: i965 >>> [ 21.061] (II) intel(0): [DRI2] VDPAU driver: va_gl >>> [ 21.061] (II) intel(0): direct rendering: DRI2 enabled >>> [ 21.061] (II) intel(0): hardware support for Present enabled >>> [ 21.061] (--) RandR disabled >>> [ 21.067] (II) SELinux: Disabled on system >>> [ 21.115] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer >>> [ 21.115] (II) AIGLX: enabled GLX_ARB_create_context >>> [ 21.115] (II) AIGLX: enabled GLX_ARB_create_context_profile >>> [ 21.115] (II) AIGLX: enabled >GLX_EXT_create_context_es{,2}_profile >>> [ 21.115] (II) AIGLX: enabled GLX_INTEL_swap_event >>> [ 21.115] (II) AIGLX: enabled GLX_SGI_swap_control and >GLX_MESA_swap_control >>> [ 21.115] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB >>> [ 21.115] (II) AIGLX: enabled GLX_ARB_fbconfig_float >>> [ 21.115] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float >>> [ 21.115] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by >buffer objects >>> [ 21.115] (II) AIGLX: enabled GLX_ARB_create_context_robustness >>> [ 21.116] (II) AIGLX: Loaded and initialized i965 >>> [ 21.116] (II) GLX: Initialized DRI2 GL provider for screen 0 >>> [ 21.125] (II) intel(0): switch to mode [email protected] on eDP1 >using pipe 0, position (0, 0), rotation normal, reflection none >>> [ 21.126] (II) intel(0): switch to mode [email protected] on DP1 >using pipe 1, position (0, 0), rotation normal, reflection none >>> [ 21.127] (II) intel(0): Setting screen physical size to 762 x >428 >>> [ 21.271] (II) config/udev: Adding input device Power Button >(/dev/input/event3) >>> [ 21.276] (**) Power Button: Applying InputClass "evdev keyboard >catchall" >>> [ 21.276] (II) LoadModule: "evdev" >>> [ 21.276] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so >>> [ 21.279] (II) Module evdev: vendor="X.Org Foundation" >>> [ 21.280] compiled for 1.18.1, module version = 2.10.1 >>> [ 21.280] Module class: X.Org XInput Driver >>> [ 21.280] ABI class: X.Org XInput driver, version 22.1 >>> [ 21.280] (II) Using input driver 'evdev' for 'Power Button' >>> [ 21.280] (**) Power Button: always reports core events >>> [ 21.280] (**) evdev: Power Button: Device: "/dev/input/event3" >>> [ 21.280] (--) evdev: Power Button: Vendor 0 Product 0x1 >>> [ 21.280] (--) evdev: Power Button: Found keys >>> [ 21.280] (II) evdev: Power Button: Configuring as keyboard >>> [ 21.280] (**) Option "config_info" >"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3" >>> [ 21.280] (II) XINPUT: Adding extended input device "Power >Button" (type: KEYBOARD, id 6) >>> [ 21.280] (**) Option "xkb_rules" "evdev" >>> [ 21.280] (**) Option "xkb_model" "pc105" >>> [ 21.280] (**) Option "xkb_layout" "dk" >>> [ 21.359] (II) config/udev: Adding input device Video Bus >(/dev/input/event15) >>> [ 21.359] (**) Video Bus: Applying InputClass "evdev keyboard >catchall" >>> [ 21.359] (II) Using input driver 'evdev' for 'Video Bus' >>> [ 21.359] (**) Video Bus: always reports core events >>> [ 21.359] (**) evdev: Video Bus: Device: "/dev/input/event15" >>> [ 21.359] (--) evdev: Video Bus: Vendor 0 Product 0x6 >>> [ 21.359] (--) evdev: Video Bus: Found keys >>> [ 21.359] (II) evdev: Video Bus: Configuring as keyboard >>> [ 21.359] (**) Option "config_info" >"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16/event15" >>> [ 21.359] (II) XINPUT: Adding extended input device "Video Bus" >(type: KEYBOARD, id 7) >>> [ 21.359] (**) Option "xkb_rules" "evdev" >>> [ 21.359] (**) Option "xkb_model" "pc105" >>> [ 21.359] (**) Option "xkb_layout" "dk" >>> [ 21.359] (II) config/udev: Adding input device Video Bus >(/dev/input/event16) >>> [ 21.359] (**) Video Bus: Applying InputClass "evdev keyboard >catchall" >>> [ 21.361] (II) Using input driver 'evdev' for 'Video Bus' >>> [ 21.361] (**) Video Bus: always reports core events >>> [ 21.361] (**) evdev: Video Bus: Device: "/dev/input/event16" >>> [ 21.361] (--) evdev: Video Bus: Vendor 0 Product 0x6 >>> [ 21.361] (--) evdev: Video Bus: Found keys >>> [ 21.361] (II) evdev: Video Bus: Configuring as keyboard >>> [ 21.361] (**) Option "config_info" >"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input17/event16" >>> [ 21.361] (II) XINPUT: Adding extended input device "Video Bus" >(type: KEYBOARD, id 8) >>> [ 21.361] (**) Option "xkb_rules" "evdev" >>> [ 21.361] (**) Option "xkb_model" "pc105" >>> [ 21.361] (**) Option "xkb_layout" "dk" >>> [ 21.362] (II) config/udev: Adding input device Lid Switch >(/dev/input/event1) >>> [ 21.362] (II) No input driver specified, ignoring this device. >>> [ 21.362] (II) This device may have been added with another >device file. >>> [ 21.362] (II) config/udev: Adding input device Sleep Button >(/dev/input/event2) >>> [ 21.362] (**) Sleep Button: Applying InputClass "evdev keyboard >catchall" >>> [ 21.362] (II) Using input driver 'evdev' for 'Sleep Button' >>> [ 21.362] (**) Sleep Button: always reports core events >>> [ 21.362] (**) evdev: Sleep Button: Device: "/dev/input/event2" >>> [ 21.362] (--) evdev: Sleep Button: Vendor 0 Product 0x3 >>> [ 21.364] (--) evdev: Sleep Button: Found keys >>> [ 21.364] (II) evdev: Sleep Button: Configuring as keyboard >>> [ 21.364] (**) Option "config_info" >"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event2" >>> [ 21.364] (II) XINPUT: Adding extended input device "Sleep >Button" (type: KEYBOARD, id 9) >>> [ 21.364] (**) Option "xkb_rules" "evdev" >>> [ 21.364] (**) Option "xkb_model" "pc105" >>> [ 21.364] (**) Option "xkb_layout" "dk" >>> [ 21.365] (II) config/udev: Adding input device HDA Intel HDMI >HDMI/DP,pcm=3 (/dev/input/event18) >>> [ 21.365] (II) No input driver specified, ignoring this device. >>> [ 21.365] (II) This device may have been added with another >device file. >>> [ 21.365] (II) config/udev: Adding input device HDA Intel HDMI >HDMI/DP,pcm=7 (/dev/input/event19) >>> [ 21.365] (II) No input driver specified, ignoring this device. >>> [ 21.365] (II) This device may have been added with another >device file. >>> [ 21.365] (II) config/udev: Adding input device HDA Intel HDMI >HDMI/DP,pcm=8 (/dev/input/event20) >>> [ 21.365] (II) No input driver specified, ignoring this device. >>> [ 21.365] (II) This device may have been added with another >device file. >>> [ 21.366] (II) config/udev: Adding input device Logitech M705 >(/dev/input/event4) >>> [ 21.366] (**) Logitech M705: Applying InputClass "evdev pointer >catchall" >>> [ 21.366] (II) Using input driver 'evdev' for 'Logitech M705' >>> [ 21.366] (**) Logitech M705: always reports core events >>> [ 21.366] (**) evdev: Logitech M705: Device: "/dev/input/event4" >>> [ 21.366] (--) evdev: Logitech M705: Vendor 0x46d Product 0x101b >>> [ 21.366] (--) evdev: Logitech M705: Found 20 mouse buttons >>> [ 21.366] (--) evdev: Logitech M705: Found scroll wheel(s) >>> [ 21.366] (--) evdev: Logitech M705: Found relative axes >>> [ 21.366] (--) evdev: Logitech M705: Found x and y relative axes >>> [ 21.366] (II) evdev: Logitech M705: Configuring as mouse >>> [ 21.366] (II) evdev: Logitech M705: Adding scrollwheel support >>> [ 21.366] (**) evdev: Logitech M705: YAxisMapping: buttons 4 and >5 >>> [ 21.366] (**) evdev: Logitech M705: EmulateWheelButton: 4, >EmulateWheelInertia: 10, EmulateWheelTimeout: 200 >>> [ 21.366] (**) Option "config_info" >"udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.2/0003:046D:C52B.0003/0003:046D:101B.0004/input/input6/event4" >>> [ 21.366] (II) XINPUT: Adding extended input device "Logitech >M705" (type: MOUSE, id 10) >>> [ 21.366] (II) evdev: Logitech M705: initialized for relative >axes. >>> [ 21.366] (**) Logitech M705: (accel) keeping acceleration scheme >1 >>> [ 21.366] (**) Logitech M705: (accel) acceleration profile 0 >>> [ 21.366] (**) Logitech M705: (accel) acceleration factor: 2.000 >>> [ 21.366] (**) Logitech M705: (accel) acceleration threshold: 4 >>> [ 21.367] (II) config/udev: Adding input device Logitech M705 >(/dev/input/mouse0) >>> [ 21.367] (II) No input driver specified, ignoring this device. >>> [ 21.367] (II) This device may have been added with another >device file. >>> [ 21.367] (II) config/udev: Adding input device Lite-On >Technology USB Productivity Option Keyboard( has the hub in # 1 ) >(/dev/input/event6) >>> [ 21.367] (**) Lite-On Technology USB Productivity Option >Keyboard( has the hub in # 1 ): Applying InputClass "evdev keyboard >catchall" >>> [ 21.367] (II) Using input driver 'evdev' for 'Lite-On Technology >USB Productivity Option Keyboard( has the hub in # 1 )' >>> [ 21.367] (**) Lite-On Technology USB Productivity Option >Keyboard( has the hub in # 1 ): always reports core events >>> [ 21.367] (**) evdev: Lite-On Technology USB Productivity Option >Keyboard( has the hub in # 1 ): Device: "/dev/input/event6" >>> [ 21.367] (--) evdev: Lite-On Technology USB Productivity Option >Keyboard( has the hub in # 1 ): Vendor 0x4b3 Product 0x301b >>> [ 21.367] (--) evdev: Lite-On Technology USB Productivity Option >Keyboard( has the hub in # 1 ): Found keys >>> [ 21.367] (II) evdev: Lite-On Technology USB Productivity Option >Keyboard( has the hub in # 1 ): Configuring as keyboard >>> [ 21.367] (**) Option "config_info" >"udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.2/2-2.2.1/2-2.2.1:1.0/0003:04B3:301B.0005/input/input8/event6" >>> [ 21.367] (II) XINPUT: Adding extended input device "Lite-On >Technology USB Productivity Option Keyboard( has the hub in # 1 )" >(type: KEYBOARD, id 11) >>> [ 21.367] (**) Option "xkb_rules" "evdev" >>> [ 21.367] (**) Option "xkb_model" "pc105" >>> [ 21.367] (**) Option "xkb_layout" "dk" >>> [ 21.368] (II) config/udev: Adding input device Lite-On >Technology USB Productivity Option Keyboard( has the hub in # 1 ) >(/dev/input/event7) >>> [ 21.368] (**) Lite-On Technology USB Productivity Option >Keyboard( has the hub in # 1 ): Applying InputClass "evdev keyboard >catchall" >>> [ 21.368] (II) Using input driver 'evdev' for 'Lite-On Technology >USB Productivity Option Keyboard( has the hub in # 1 )' >>> [ 21.368] (**) Lite-On Technology USB Productivity Option >Keyboard( has the hub in # 1 ): always reports core events >>> [ 21.368] (**) evdev: Lite-On Technology USB Productivity Option >Keyboard( has the hub in # 1 ): Device: "/dev/input/event7" >>> [ 21.368] (--) evdev: Lite-On Technology USB Productivity Option >Keyboard( has the hub in # 1 ): Vendor 0x4b3 Product 0x301b >>> [ 21.368] (--) evdev: Lite-On Technology USB Productivity Option >Keyboard( has the hub in # 1 ): Found keys >>> [ 21.368] (II) evdev: Lite-On Technology USB Productivity Option >Keyboard( has the hub in # 1 ): Configuring as keyboard >>> [ 21.368] (**) Option "config_info" >"udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.2/2-2.2.1/2-2.2.1:1.1/0003:04B3:301B.0006/input/input9/event7" >>> [ 21.368] (II) XINPUT: Adding extended input device "Lite-On >Technology USB Productivity Option Keyboard( has the hub in # 1 )" >(type: KEYBOARD, id 12) >>> [ 21.368] (**) Option "xkb_rules" "evdev" >>> [ 21.368] (**) Option "xkb_model" "pc105" >>> [ 21.368] (**) Option "xkb_layout" "dk" >>> [ 21.369] (II) config/udev: Adding input device Integrated Camera >(/dev/input/event17) >>> [ 21.369] (**) Integrated Camera: Applying InputClass "evdev >keyboard catchall" >>> [ 21.369] (II) Using input driver 'evdev' for 'Integrated Camera' >>> [ 21.369] (**) Integrated Camera: always reports core events >>> [ 21.369] (**) evdev: Integrated Camera: Device: >"/dev/input/event17" >>> [ 21.369] (--) evdev: Integrated Camera: Vendor 0x5986 Product >0x366 >>> [ 21.369] (--) evdev: Integrated Camera: Found keys >>> [ 21.369] (II) evdev: Integrated Camera: Configuring as keyboard >>> [ 21.369] (**) Option "config_info" >"udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input18/event17" >>> [ 21.369] (II) XINPUT: Adding extended input device "Integrated >Camera" (type: KEYBOARD, id 13) >>> [ 21.369] (**) Option "xkb_rules" "evdev" >>> [ 21.369] (**) Option "xkb_model" "pc105" >>> [ 21.369] (**) Option "xkb_layout" "dk" >>> [ 21.370] (II) config/udev: Adding input device HDA Digital >PCBeep (/dev/input/event10) >>> [ 21.370] (II) No input driver specified, ignoring this device. >>> [ 21.370] (II) This device may have been added with another >device file. >>> [ 21.370] (II) config/udev: Adding input device HDA Intel PCH >Dock Mic (/dev/input/event11) >>> [ 21.370] (II) No input driver specified, ignoring this device. >>> [ 21.370] (II) This device may have been added with another >device file. >>> [ 21.370] (II) config/udev: Adding input device HDA Intel PCH Mic >(/dev/input/event12) >>> [ 21.370] (II) No input driver specified, ignoring this device. >>> [ 21.370] (II) This device may have been added with another >device file. >>> [ 21.370] (II) config/udev: Adding input device HDA Intel PCH >Dock Headphone (/dev/input/event13) >>> [ 21.370] (II) No input driver specified, ignoring this device. >>> [ 21.370] (II) This device may have been added with another >device file. >>> [ 21.375] (II) config/udev: Adding input device HDA Intel PCH >Headphone (/dev/input/event14) >>> [ 21.375] (II) No input driver specified, ignoring this device. >>> [ 21.375] (II) This device may have been added with another >device file. >>> [ 21.375] (II) config/udev: Adding input device AT Translated Set >2 keyboard (/dev/input/event0) >>> [ 21.375] (**) AT Translated Set 2 keyboard: Applying InputClass >"evdev keyboard catchall" >>> [ 21.375] (II) Using input driver 'evdev' for 'AT Translated Set >2 keyboard' >>> [ 21.375] (**) AT Translated Set 2 keyboard: always reports core >events >>> [ 21.375] (**) evdev: AT Translated Set 2 keyboard: Device: >"/dev/input/event0" >>> [ 21.375] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 >Product 0x1 >>> [ 21.375] (--) evdev: AT Translated Set 2 keyboard: Found keys >>> [ 21.375] (II) evdev: AT Translated Set 2 keyboard: Configuring >as keyboard >>> [ 21.375] (**) Option "config_info" >"udev:/sys/devices/platform/i8042/serio0/input/input0/event0" >>> [ 21.375] (II) XINPUT: Adding extended input device "AT >Translated Set 2 keyboard" (type: KEYBOARD, id 14) >>> [ 21.375] (**) Option "xkb_rules" "evdev" >>> [ 21.375] (**) Option "xkb_model" "pc105" >>> [ 21.375] (**) Option "xkb_layout" "dk" >>> [ 21.376] (II) config/udev: Adding input device SynPS/2 Synaptics >TouchPad (/dev/input/event5) >>> [ 21.376] (**) SynPS/2 Synaptics TouchPad: Applying InputClass >"evdev touchpad catchall" >>> [ 21.376] (**) SynPS/2 Synaptics TouchPad: Applying InputClass >"evdev touchscreen catchall" >>> [ 21.376] (**) SynPS/2 Synaptics TouchPad: Applying InputClass >"touchpad catchall" >>> [ 21.376] (**) SynPS/2 Synaptics TouchPad: Applying InputClass >"Default clickpad buttons" >>> [ 21.376] (II) LoadModule: "synaptics" >>> [ 21.376] (II) Loading >/usr/lib/xorg/modules/input/synaptics_drv.so >>> [ 21.381] (II) Module synaptics: vendor="X.Org Foundation" >>> [ 21.381] compiled for 1.18.1, module version = 1.8.2 >>> [ 21.381] Module class: X.Org XInput Driver >>> [ 21.381] ABI class: X.Org XInput driver, version 22.1 >>> [ 21.381] (II) Using input driver 'synaptics' for 'SynPS/2 >Synaptics TouchPad' >>> [ 21.381] (**) SynPS/2 Synaptics TouchPad: always reports core >events >>> [ 21.381] (**) Option "Device" "/dev/input/event5" >>> [ 21.464] (II) synaptics: SynPS/2 Synaptics TouchPad: found >clickpad property >>> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis >range 1266 - 5676 (res 45) >>> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis >range 1096 - 4758 (res 68) >>> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure >range 0 - 255 >>> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: finger >width range 0 - 15 >>> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: >left double triple >>> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 >Product 0x7 >>> [ 21.464] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0" >>> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad >found >>> [ 21.464] (**) SynPS/2 Synaptics TouchPad: always reports core >events >>> [ 21.500] (**) Option "config_info" >"udev:/sys/devices/platform/i8042/serio1/input/input5/event5" >>> [ 21.500] (II) XINPUT: Adding extended input device "SynPS/2 >Synaptics TouchPad" (type: TOUCHPAD, id 15) >>> [ 21.500] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) >MinSpeed is now constant deceleration 2.5 >>> [ 21.500] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) >MaxSpeed is now 1.75 >>> [ 21.500] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) >AccelFactor is now 0.035 >>> [ 21.500] (**) SynPS/2 Synaptics TouchPad: (accel) keeping >acceleration scheme 1 >>> [ 21.500] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration >profile 1 >>> [ 21.500] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration >factor: 2.000 >>> [ 21.500] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration >threshold: 4 >>> [ 21.500] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad >found >>> [ 21.500] (II) config/udev: Adding input device SynPS/2 Synaptics >TouchPad (/dev/input/mouse1) >>> [ 21.500] (**) SynPS/2 Synaptics TouchPad: Ignoring device from >InputClass "touchpad ignore duplicates" >>> [ 21.501] (II) config/udev: Adding input device TPPS/2 IBM >TrackPoint (/dev/input/event8) >>> [ 21.501] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev >pointer catchall" >>> [ 21.501] (**) TPPS/2 IBM TrackPoint: Applying InputClass >"trackpoint catchall" >>> [ 21.501] (II) Using input driver 'evdev' for 'TPPS/2 IBM >TrackPoint' >>> [ 21.501] (**) TPPS/2 IBM TrackPoint: always reports core events >>> [ 21.501] (**) evdev: TPPS/2 IBM TrackPoint: Device: >"/dev/input/event8" >>> [ 21.501] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product >0xa >>> [ 21.501] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse >buttons >>> [ 21.501] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes >>> [ 21.501] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y >relative axes >>> [ 21.501] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse >>> [ 21.501] (**) Option "Emulate3Buttons" "true" >>> [ 21.501] (**) Option "EmulateWheel" "true" >>> [ 21.501] (**) Option "EmulateWheelButton" "2" >>> [ 21.501] (**) Option "YAxisMapping" "4 5" >>> [ 21.501] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: >buttons 4 and 5 >>> [ 21.501] (**) Option "XAxisMapping" "6 7" >>> [ 21.501] (**) evdev: TPPS/2 IBM TrackPoint: XAxisMapping: >buttons 6 and 7 >>> [ 21.501] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: >2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 >>> [ 21.501] (**) Option "config_info" >"udev:/sys/devices/platform/i8042/serio1/serio2/input/input7/event8" >>> [ 21.501] (II) XINPUT: Adding extended input device "TPPS/2 IBM >TrackPoint" (type: MOUSE, id 16) >>> [ 21.501] (II) evdev: TPPS/2 IBM TrackPoint: initialized for >relative axes. >>> [ 21.501] (**) TPPS/2 IBM TrackPoint: (accel) keeping >acceleration scheme 1 >>> [ 21.501] (**) TPPS/2 IBM TrackPoint: (accel) acceleration >profile 0 >>> [ 21.501] (**) TPPS/2 IBM TrackPoint: (accel) acceleration >factor: 2.000 >>> [ 21.501] (**) TPPS/2 IBM TrackPoint: (accel) acceleration >threshold: 4 >>> [ 21.501] (II) config/udev: Adding input device TPPS/2 IBM >TrackPoint (/dev/input/mouse2) >>> [ 21.501] (II) No input driver specified, ignoring this device. >>> [ 21.501] (II) This device may have been added with another >device file. >>> [ 21.502] (II) config/udev: Adding input device ThinkPad Extra >Buttons (/dev/input/event9) >>> [ 21.502] (**) ThinkPad Extra Buttons: Applying InputClass "evdev >keyboard catchall" >>> [ 21.502] (II) Using input driver 'evdev' for 'ThinkPad Extra >Buttons' >>> [ 21.502] (**) ThinkPad Extra Buttons: always reports core events >>> [ 21.502] (**) evdev: ThinkPad Extra Buttons: Device: >"/dev/input/event9" >>> [ 21.502] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa >Product 0x5054 >>> [ 21.502] (--) evdev: ThinkPad Extra Buttons: Found keys >>> [ 21.502] (II) evdev: ThinkPad Extra Buttons: Configuring as >keyboard >>> [ 21.502] (**) Option "config_info" >"udev:/sys/devices/platform/thinkpad_acpi/input/input10/event9" >>> [ 21.502] (II) XINPUT: Adding extended input device "ThinkPad >Extra Buttons" (type: KEYBOARD, id 17) >>> [ 21.502] (**) Option "xkb_rules" "evdev" >>> [ 21.502] (**) Option "xkb_model" "pc105" >>> [ 21.502] (**) Option "xkb_layout" "dk" >>> [ 23.053] (II) intel(0): EDID vendor "MEI", prod id 38562 >>> [ 23.053] (II) intel(0): EDID quirk: Use maximum size instead >of detailed timing sizes. >>> [ 23.053] (II) intel(0): Using EDID range info for horizontal >sync >>> [ 23.053] (II) intel(0): Using EDID range info for vertical >refresh >>> [ 23.053] (II) intel(0): Printing DDC gathered Modelines: >>> [ 23.053] (II) intel(0): Modeline "2880x1620"x0.0 302.50 2880 >2924 2928 3076 1620 1629 1630 1640 +hsync +vsync (98.3 kHz eP) >>> [ 23.053] (II) intel(0): Modeline "2880x1620"x0.0 302.50 2880 >2924 2928 3076 1620 1629 1630 1967 +hsync +vsync (98.3 kHz e) >>> [ 23.909] (II) intel(0): resizing framebuffer to 5440x1620 >>> [ 23.960] (II) intel(0): switch to mode [email protected] on DP1 >using pipe 1, position (2880, 0), rotation normal, reflection none >> >> >> >> >> >>> _______________________________________________ >>> Nouveau mailing list >>> [email protected] >>> https://lists.freedesktop.org/mailman/listinfo/nouveau >> > > > > >------------------------------------------------------------------------ > >_______________________________________________ >Nouveau mailing list >[email protected] >https://lists.freedesktop.org/mailman/listinfo/nouveau _______________________________________________ Nouveau mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/nouveau
