yeah, i suppose it is a bit more off topic than i intended...but, as long as no one really minds...
Anyway, one system is a dual P100 processor setup, the other is a dual PPC processor setup... oh, to put us slightly on topic...would Win2k run on that :p (hey, i've ran NT on 200MHZ work stations and 2k on 233Mhz workstations) thnx again all I'll try OBSD this weekend on it. ;) shane -----Original Message----- From: King, John [mailto:[EMAIL PROTECTED]] Sent: Friday, December 06, 2002 7:28 AM To: NT 2000 Discussions Subject: RE: Kinda OT -- Firewall servers and the like (home use) Well it is actually really easy. To learn about the project check out www.openbsd.org . To install via ftp you will need a boot floppy. Just pick a FTP mirror( there are lots of them, see the website for details) and navigate to here ftp://ftp3.usa.openbsd.org/pub/OpenBSD/3.2/i386/ 3.2 stands for the current release and i386 is the system arch( which I assume you run i386). Then download a floppy image floppy*.fs. This link (http://www.openbsd.org/i386.html) will help you determine which floppy image that you need depending on hardware driver requirements. Then use a simple utility like rawrite for windows, should be able to google for it. Then write the floppy image to disk and boot to it. Follow the instructions, like Roger has said the disk partitioning is really the hardest part. This FAQ, http://www.openbsd.org/faq/faq4.html , has a step by step procedure for completing the install, very helpful and well written. Now as for the firewall software, it is included in the OS. One of the major points of this OS is security. All you need to do is turn it on in /etc/rc.conf. This file controls what services run. Just set pf=YES. Then to configure your rules edit the file /etc/pf.conf. Then reload with pfctl and your filtering packets. For a brief syntax reference and examples just type man pf.conf. I know that this is way off topic for a windows list, but hey its Friday. John -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Thursday, December 05, 2002 6:18 PM To: NT 2000 Discussions Subject: RE: Kinda OT -- Firewall servers and the like (home use) Where would you direct someone who wanted to try that - re both the OS and the firewall software? -----Original Message----- From: King, John [mailto:[EMAIL PROTECTED]] Sent: Thursday, December 05, 2002 6:08 AM To: NT 2000 Discussions Subject: RE: Kinda OT -- Firewall servers and the like (home use) I totally agree. Nice to see other OBSD users on the list. I have been running OpenBSD on a P233 with 64 MB as my home Firewall/Router. OpenBSD is really the best choice for router/firewall installs. The new PF syntax is so great. It is easy to install via FTP, all you need is a boot disk and a network connection and you can have a fully functional system up in 20 minutes. The documentation is also very well done. You could even use a secure(3DES)IPsec to build your own VPN. I can't say enough good things about OpenBSD..! I used to be a Linux user through and through, until I got turned onto OpenBSD. Every thing is well designed and makes sense. Although Mozilla doesn't run natively, but I guess I can't have my cake and eat it too. I even run IceCast on my OpenBSD firewall. Runs like a champ. John -----Original Message----- From: Roger Seielstad [mailto:[EMAIL PROTECTED]] Sent: Thursday, December 05, 2002 9:01 AM To: NT 2000 Discussions Subject: RE: Kinda OT -- Firewall servers and the like (home use) I'd use the 233 and run OpenBSD. In fact, that's exactly what I do at home right now. The dual PPC 100 is going to be harder to find a supporting OS, although I'd figure Linux probably runs on it. ------------------------------------------------------ Roger D. Seielstad - MCSE Sr. Systems Administrator Inovis - Formerly Harbinger and Extricity Atlanta, GA > -----Original Message----- > From: Caraker Shane A SrA 1 CS/SCMV > [mailto:[EMAIL PROTECTED]] > Sent: Thursday, December 05, 2002 8:54 AM > To: NT 2000 Discussions > Subject: Kinda OT -- Firewall servers and the like (home use) > > > My roommate recently acquired a Dual P233 (think it was a > 233) system and a > Dual Power PC 100mhz system... (not sure the rest of the > specs off hand, i > know one system has 10 2.5gig SCSI Drives)... > > Would either of these be suited for a firewall setup? I'm > assuming some > version of *nix could handle this w/ out a problem, as well > as maybe acting > as a file server (no important files) and a few other misc tasks. > > This sound feasible? and what *nix flavor would be best > suited to something > like this? > > Neither of us are "well versed" in linux/unix, but we're both > familair with > it. > > > thnx > > shane > > > ------ > You are subscribed as [EMAIL PROTECTED] > Archives: http://www.swynk.com/sitesearch/search.asp > To unsubscribe send a blank email to %%email.unsub%% > ------ You are subscribed as [EMAIL PROTECTED] Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe send a blank email to %%email.unsub%% ------ You are subscribed as [EMAIL PROTECTED] Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe send a blank email to %%email.unsub%% ------ You are subscribed as [EMAIL PROTECTED] Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe send a blank email to %%email.unsub%% ------ You are subscribed as [EMAIL PROTECTED] Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe send a blank email to %%email.unsub%% ------ You are subscribed as [email protected] Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe send a blank email to [EMAIL PROTECTED]
