It sounds like you may have some older files - if you checkout once as root and then as another user, for example, the new files won't be overlaid. Don't worry about it, just clean out the directory (or use a new one) and try a clean checkout.
-----Burton > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Kevin > Phillips > Sent: Monday, February 02, 2004 9:48 AM > To: [EMAIL PROTECTED] > Subject: RE: [Ntop] RE:NTOP and RRD > > > When I run ./configure I get a message about ssl.h not being installed, > but I am not going to use ssh, and a message about xmldump not going to > be installed which is fine. > > When I run make it is ok until I get the following messages, which I > need help moving beyond. > > --gnu Makefile > make[2]: Leaving directory `/root/ntop-current/ntop' > Making all in plugins > make[2]: Entering directory `/root/ntop-current/ntop/plugins' > Making all in . > make[3]: Entering directory `/root/ntop-current/ntop/plugins' > source='icmpPlugin.c' object='icmpPlugin.lo' libtool=yes \ > depfile='.deps/icmpPlugin.Plo' tmpdepfile='.deps/icmpPlugin.TPlo' \ > depmode=gcc3 /bin/sh ../depcomp \ > /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. > -I/root/ntop-current/ntop/myrrd -DLINUX -I/usr/local/include > -I/root/ntop-current/ntop/myrrd -g -O2 -I/usr/local/include -Wshadow > -Wpointer-arith -Wmissing-prototypes -Wmissing-declarations > -Wnested-externs -fPIC -c -o icmpPlugin.lo `test -f 'icmpPlugin.c' || > echo './'`icmpPlugin.c > rm -f .libs/icmpPlugin.lo > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I/root/ntop-current/ntop/myrrd > -DLINUX -I/usr/local/include -I/root/ntop-current/ntop/myrrd -g -O2 > -I/usr/local/include -Wshadow -Wpointer-arith -Wmissing-prototypes > -Wmissing-declarations -Wnested-externs -fPIC -c icmpPlugin.c -MT > icmpPlugin.lo -MD -MP -MF .deps/icmpPlugin.TPlo -fPIC -DPIC -o > .libs/icmpPlugin.lo > icmpPlugin.c: In function `formatSentRcvd': > icmpPlugin.c:161: too few arguments to function `formatPkts' > icmpPlugin.c:161: too few arguments to function `formatPkts' > icmpPlugin.c: In function `handleIcmpWatchHTTPrequest': > icmpPlugin.c:288: too few arguments to function `printHTMLheader' > icmpPlugin.c:292: parse error before "STR_SHOW_PLUGINS" > icmpPlugin.c:344: too few arguments to function `makeHostLink' > icmpPlugin.c:349: too few arguments to function `formatBytes' > icmpPlugin.c:354: too few arguments to function `formatBytes' > icmpPlugin.c:402: parse error before "STR_SHOW_PLUGINS" > icmpPlugin.c: At top level: > icmpPlugin.c:428: warning: initialization makes integer from pointer > without a cast > icmpPlugin.c:429: warning: initialization from incompatible pointer type > icmpPlugin.c:431: warning: initialization from incompatible pointer type > make[3]: *** [icmpPlugin.lo] Error 1 > make[3]: Leaving directory `/root/ntop-current/ntop/plugins' > make[2]: *** [all-recursive] Error 1 > make[2]: Leaving directory `/root/ntop-current/ntop/plugins' > make[1]: *** [all-recursive] Error 1 > make[1]: Leaving directory `/root/ntop-current/ntop' > make: *** [all] Error 2 > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of > Burton M. Strauss III > Sent: Friday, January 30, 2004 9:39 AM > To: [EMAIL PROTECTED] > Subject: RE: [Ntop] RE:NTOP and RRD > > ntop versions after something in the 2.2.52 range include a static, > frozen > rrd, myrrd, and ignore any rrd installed on the system. > > So, although you might want to install rrdtool to have the command line > program (for data extract, etc.), it's not necessary nor required. > > Further, there's no such message in the source... > > setPluginStatus("Disabled - requires POSIX thread support."); > setPluginStatus("Disabled - unable to create rrd base > directory."); > setPluginStatus("Disabled - unable to create rrd > subdirectory."); > > are the only ones. > > > It sounds like you're not running the version of ntop you think you are, > but > are in fact running 2.2 or 2.2c. Maybe you have a version installed in > both > /usr/bin and /usr/local/bin..... > > -----Burton > > > > > > -----Original Message----- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of > Kevin > > Phillips > > Sent: Friday, January 30, 2004 8:17 AM > > To: [EMAIL PROTECTED] > > Subject: [Ntop] RE:NTOP and RRD > > > > > > I downloaded ntop-2.2.95.gz, compiled and installed it. > > I am running on RedHat 9. > > I am running rrdtool-1.0.45-1 > > > > > > -----Original Message----- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of > > Stephan Knabe > > Sent: Thursday, January 29, 2004 4:52 PM > > To: [EMAIL PROTECTED] > > Subject: Re: [Ntop] (no subject) > > > > On Thu, 29 Jan 2004, Kevin Phillips wrote: > > > > > I have looked through the docs that I can find, and have RRD > installed > > > but when I try to configure the rrdPlugin from the admin page I get > > told > > > that the plugin is disabled as ntop has not been compiled with RRD > > > support. > > > > What kind of ntop are you using? > > What OS? > > Prebuilt package or self compiled ? > > ... > > > > Please tell us more and use a subject. > > > > > How do I compile with RRD support? > > > > It is enabled by default. > > > > regards > > > > Stephan Knabe > > > > _______________________________________________ > > Ntop mailing list > > [EMAIL PROTECTED] > > http://listgateway.unipi.it/mailman/listinfo/ntop > > > > > > _______________________________________________ > > Ntop mailing list > > [EMAIL PROTECTED] > > http://listgateway.unipi.it/mailman/listinfo/ntop > > > > _______________________________________________ > Ntop mailing list > [EMAIL PROTECTED] > http://listgateway.unipi.it/mailman/listinfo/ntop > > > _______________________________________________ > Ntop mailing list > [EMAIL PROTECTED] > http://listgateway.unipi.it/mailman/listinfo/ntop > _______________________________________________ Ntop mailing list [EMAIL PROTECTED] http://listgateway.unipi.it/mailman/listinfo/ntop
