Try setting the ports manually. Is it possible to try connecting the printer on the same switch as the server? I had a problem with a Xerox that drove me nuts - until we ran the cable to the main switch.
On Tue, Jul 6, 2010 at 12:45 PM, Shawn Everett <[email protected]> wrote: > Hi All, > > I have a newly installed Windows 2003 R2 domain controller. There are > three locally configured network printers set up on it. > > The two Lexmark printers print just fine without issues. > > I have a Konica Minolta C353 that does not print quickly. Printing > something as simple as a Windows test page takes almost a full minute > when/if it prints. > > Both the server and the Konica printer are connected to the same switch. > A Cisco Catalyst 2960. Both ports are set to Auto Negotiate. > > Small print jobs printing from an XP workstation with the printer > configured locally rather than via the share seems to print OK 90% of the > time. Large print jobs are unreliable. > > We've tried multiple drivers without success. The printer vendor is > claiming the printer is OK. > > Any suggestions on where to look next would be appreciated. > > Shawn > > > ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ > ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ > ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~
