Yeah, that’s been my experience as well. Frustrating. Gary Jaeger // Core Studio 249 Princeton Avenue Half Moon Bay, CA 94019 650.728.7957 (direct) 650.728.7060 (main) http://corestudio.com
> On Jul 13, 2015, at 3:56 PM, chris <[email protected]> wrote: > > hiya, > > don't have a good answer to your exact problem, but i thought i'll add that > i've done several tests between the "Video" "Film" and "RAW" recording with a > blackmagic pocket and for the life of it i couldn't find a way to match them > exactly in any application (not even in resolve, which is from the same > company!) > > i found that their provided "Log to Rec709" LUT gives quite different results > then if recorded in-camera in video mode - which is a pity because the > cameras video colours usually look better to me (but clip shadows/highlights). > > might be that i was doing something wrong all the time (and if i have, please > let me know because i'd love to solve this), but i thought i'd add this just > in case that the problem is not your workflow but rather the provided LUT > (tried several others. > > wanted to get to the bottom of this for quite a while but as always other > things come up all the time. > chris > > > > > On 7/13/15 at 12:00 AM, [email protected] (Gary Jaeger) wrote: > >> Thanks Simon. The “close enough” solution is always where I’ve ended up >> before, but I thought I’d actually try and solve it this time. Silly me. >> >> So I’m assuming you mean OCIOFileTransform, which I’ve used before for >> various things, like when I made my own via MatchGrade and exported a .csp >> file. That seems to work, but I can’t read any of the resolve luts into that >> node. They fail with an error. I do have one called “BMDFIlmToLinear.cube” >> that reads in, but doesn’t seem right either. Not sure where I got that >> file, and it’s not the same as the “BMDFIlm To Linear.cube” files that are >> installed with Resolve. >> >> It did occur to me though that it might be better to just use a MatchGrade >> node. While that seems to sort of work for .mov files, I can’t get the same >> method to work for the .dng files. >> Anyway, take a look if you have time. Curious about your thoughts. >> Gary Jaeger // Core Studio >> 249 Princeton Avenue >> Half Moon Bay, CA 94019 >> 650.728.7957 (direct) >> 650.728.7060 (main) >> http://corestudio.com > > _______________________________________________ > Nuke-users mailing list > [email protected], http://forums.thefoundry.co.uk/ > http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users _______________________________________________ Nuke-users mailing list [email protected], http://forums.thefoundry.co.uk/ http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users
