On Mon, Oct 20, 2008 at 12:38 PM, Arjen de Korte <[EMAIL PROTECTED]> wrote: > Citeren Carlos Rodrigues <[EMAIL PROTECTED]>: > >> The attached patch adds a "battvoltmult" parameter to the megatec >> driver in the trunk. >> >> It should work, but I'm away from a development environment, so it is >> totally untested (it wasn't even compiled to check for syntax errors). >> The changes are mostly harmless, though. > > Not entirely. It would break the calculation of "battery.charge". I > committed a slightly modified version that works around that. Basically the > only change needed is to correct "battery.voltage". Internally the driver > should still use the raw value from the UPS.
Oh, right. I completely ignored the charge calculation when not based on the "battvolts" parameter... BTW, the patch has a small typo in one of the comments: "applied to battery.volage" :) Regards, -- Carlos Rodrigues _______________________________________________ Nut-upsdev mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsdev
