My bad. I'll check it out. On Sun, 2 Jun 2024 at 08:14, Roger Price < [email protected]> wrote:
> On Sat, 1 Jun 2024, Alan via Nut-upsuser wrote: > > > root@proxmox-01:~# cat nano /etc/nut/ups.conf > > If you send us hundreds of lines of comments it makes your post difficult > to > understand. Could you trim out the comments with for example > > cat /etc/nut/ups.conf | grep -v "#" > > which would show us the following, which is what we need to see. > > > maxretry = 3 > > > > offdelay = 120 > > ondelay = 240 > > > > [pve1] > > driver = "usbhid-ups" > > port = "auto" > > vendorid = "06DA" > > productid = "FFFF" > > desc = "Phoenixtec Power Co., Ltd Innova Unity" > > serial = "CPANM2436540037" > > override.battery.charge.low = 70 > > override.battery.runtime.low = 2500 > > # wait 5 minutes for ups to power off > > override.ups.delay.shutdown = 300 > > I don't see the line > > lowbatt = 70 > > which you need to make a permanent change to the value. If you use the > "override", the driver will restore the default. See chapter 2.7 in > https://rogerprice.org/NUT/ConfigExamples.A5.pdf > > Try re-running your test with lowbatt = 70 . > Roger_______________________________________________ > Nut-upsuser mailing list > [email protected] > https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser >
_______________________________________________ Nut-upsuser mailing list [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
