On 04/22/2006 05:09 AM, Carlos Rodrigues wrote:
Measuring the voltages just means letting the UPS charge completely
(until the bundled software says 100%) and then see what value NUT
reports for "battery.voltage", and then unplugging the UPS from the
wall until it goes into low battery, and check again the voltage that
NUT is reporting.
Lol, I thought you need the real values, as measured on the batteries :))
Well, the battery now is at 100% and nut reports battery.voltage: 2.3
I will unplug. discharge and let you know the second value.
PS: ref the devel version
- if I use "megatec /dev/ttyS0", it starts OK, but upsd cannot connect
to it
Apr 22 05:37:08 wolfy megatec[30742]: Startup successful
Apr 22 05:37:11 wolfy upsd[30743]: Can't connect to UPS [ablerex]
(ablerex): No such file or directory
Apr 22 05:37:16 wolfy upsd[30744]: Startup successful
- if I use megatec -a ablerex, everything is OK:
Apr 22 05:40:36 wolfy megatec[30752]: Startup successful
Apr 22 05:40:37 wolfy upsd[30753]: Connected to UPS [ablerex]: ablerex
Apr 22 05:40:38 wolfy upsd[30754]: Startup successful
Is this normal? I have made no change to the configuration files
(except for replacing the model name), and now the behavior is different...
ups.conf contains:
[ablerex]
driver = megatec
port = /dev/ttyS0
desc = "Web server"
_______________________________________________
Nut-upsuser mailing list
[email protected]
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
