Hi I'm having a problem with the bcmxcp_usb driver FSD command: everything seems to work apart from:
upsmon -c fsd Environment: Ubuntu 7.04, nut 2.0.5-1, nut-usb 2.0.5-1, Powerware 3105 UPS. upsd appears to send the FSD command to the UPS, upsmon then runs my NOTIFYCMD (which halts my PC) but the UPS just doesn't turn off. Here are the /var/log/daemon.log entries: Jul 24 23:13:16 kea upsmon[5226]: Signal 10: User requested FSD Jul 24 23:13:16 kea upsd[5223]: Client [EMAIL PROTECTED] set FSD on UPS [pw3105] Jul 24 23:13:16 kea upsmon[5226]: Executing automatic power-fail shutdown Jul 24 23:13:16 kea upsmon[5226]: Auto logout and shutdown proceeding Jul 24 23:13:21 kea upsd[5223]: Host 127.0.0.1 disconnected (read failure) : Jul 24 23:13:28 kea upsd[5223]: Signal 15: exiting I might have suspected the UPS or USB interface/cable if not for the fact that the shutdown.stayoff instant command works -- turns ups off immediately and that notifications are returned from the UPS. The bcmxcp_usb driver reports the following status: # upsc [EMAIL PROTECTED] driver.name: bcmxcp_usb driver.parameter.port: auto driver.parameter.shutdown_delay: 120 driver.version: 2.0.5 driver.version.internal: 0.11 input.phases: 1 ups.firmware: 00.80 ups.model: POWERWARE UPS 500VA ups.power.nominal: 500 ups.serial: ups.status: OL ups.voltage.nominal: 240 One peculiarity -- even though the test.battery.start instant command is listed it puts this in the log: Jul 24 23:08:11 kea bcmxcp_usb[5221]: [test.battery.start] not supported Any help would be appreciated. Cheers, Stuart _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
