I'm not sure its a PW5115, as the PW5115 has a USB port. I've been using a Windows box to test with HP's software and PuTTY as my Linux server doesn't have a serial port yet.. but with the PW5115 cable it doesn't work either.
I did fool around with a volt meter on the UPS serial port and found the following in case it narrows things down: Pin 5: Ground Pin 6: 12V Pin 2: -8V This is when everything is nominal, AC power on, battery OK. On 21/12/08 9:20 PM, Kjell Claesson wrote: > Den Sunday 21 December 2008 00.20.04 skrev Mathew McBride: >> Hello Kjell, > > OK Mathew, >> I've already tried the pinout mentioned in the pdf, unfortunately the >> units there are older ones pre-HP merger, the 'H' (or 'XR') series which >> I have was later branded HP.. >> >> This document from HP: >> http://h10032.www1.hp.com/ctg/Manual/c00367363.pdf lists 201092-002 as >> being the bundled cable with mine. > > Have checked my doc's and it looks like it is a re-branded PW5115. > > http://lit.powerware.com/ll_download.asp?file=PW5115_Users_manual_1015715B_E.pdf > > This pdf is only showing drawings, but the PW5115 750VA looks the same as the > HP T700H. The document is also showing a connection of the serial cable > (page 12 ). > > But then you need to try out the bcmxcp driver. As the XR models droped > the use of upscode2. > > /Kjell _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
