On 14/1/09 2:43 AM, Kjell Claesson wrote: > What driver do you use , upscode2 or bcmxcp ? > > Can you send the outupt of > upsc<ups> > I'm using bcmxcp for this particular (XR series) model. Here is a typical upsc list: ambient.temperature: 42 battery.charge: 95 battery.runtime: 9000 battery.voltage: 26.13 driver.name: bcmxcp driver.parameter.pollinterval: 2 driver.parameter.port: /dev/ttyS1 driver.version: 2.4.0-pre1 driver.version.internal: 0.18 input.frequency: 50.34 input.voltage: 245 output.current: 0.7 output.frequency: 50.34 output.phases: 1 output.voltage: 217 output.voltage.nominal: 230 ups.firmware: Inve:04.01 ups.load: 0.6 ups.model: T700h INT'L 700VA ups.power.nominal: 700 ups.serial: UU064A0283 ups.status: TRIM
- Mathew _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
