2012/2/3 Zach La Celle <[email protected]>: > I upgraded manually to the new Nut, but still receive the same error:
I should have added: supported by the usbhid-ups driver (so USB only). > root@www:/etc/nut# /lib/nut/apcsmart -DDDDD -a rack1ups > Network UPS Tools - APC Smart protocol driver 2.03 (2.6.0) > APC command table version 2.1 > 0.000000 send_to_all: SETINFO driver.parameter.port "/dev/ttyS0" > 0.000046 debug level is '5' > 0.000607 send_to_all: SETINFO device.type "ups" > 0.000619 send_to_all: SETINFO driver.version "2.6.0" > 0.000626 send_to_all: SETINFO driver.version.internal "2.03" > 0.000633 send_to_all: SETINFO driver.name "apcsmart" > 38.542178 Unable to detect an APC Smart protocol UPS on port /dev/ttyS0 > Check the cabling, port name or model name and try again > > It's now version 2.6.0, but the apcsmart driver still will not connect. > > On the USB side of things, something seems fishy with the APC usb > connection: it's been incrementing the Device ID, up to 124 from 004. this is not a big issue, and probably due to the 2.4.3 driver. Could you please try usbhid-ups in 2.6.0, and report back if everything is ok. Since SmartUPS LCD is not in the compat. list, I would appreciate, if it works, that you send the "new report" information: http://www.networkupstools.org/stable-hcl.html#footnotes cheers, Arnaud -- Linux / Unix Expert R&D - Eaton - http://powerquality.eaton.com Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer - http://www.debian.org Free Software Developer - http://arnaud.quette.free.fr/ _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
