On 02/03/2012 03:10 PM, Arnaud Quette wrote: > 2012/2/3 Zach La Celle <[email protected]>: >> I upgraded manually to the new Nut, but still receive the same error: > > I should have added: supported by the usbhid-ups driver (so USB only). > >> root@www:/etc/nut# /lib/nut/apcsmart -DDDDD -a rack1ups >> Network UPS Tools - APC Smart protocol driver 2.03 (2.6.0) >> APC command table version 2.1 >> 0.000000 send_to_all: SETINFO driver.parameter.port "/dev/ttyS0" >> 0.000046 debug level is '5' >> 0.000607 send_to_all: SETINFO device.type "ups" >> 0.000619 send_to_all: SETINFO driver.version "2.6.0" >> 0.000626 send_to_all: SETINFO driver.version.internal "2.03" >> 0.000633 send_to_all: SETINFO driver.name "apcsmart" >> 38.542178 Unable to detect an APC Smart protocol UPS on port /dev/ttyS0 >> Check the cabling, port name or model name and try again >> >> It's now version 2.6.0, but the apcsmart driver still will not connect. >> >> On the USB side of things, something seems fishy with the APC usb >> connection: it's been incrementing the Device ID, up to 124 from 004. > > this is not a big issue, and probably due to the 2.4.3 driver. > > Could you please try usbhid-ups in 2.6.0, and report back if everything is ok. > Since SmartUPS LCD is not in the compat. list, I would appreciate, if > it works, that you send the "new report" information: > http://www.networkupstools.org/stable-hcl.html#footnotes > > cheers, > Arnaud
What happens with the 2.6.0 driver: The device id keeps incrementing, and thus running the driver has two different results: First result (device present): root@www:/etc/nut# /lib/nut/usbhid-ups -a rack1ups Network UPS Tools - Generic HID driver 0.35 (2.6.0) USB communication driver 0.31 interrupt pipe disabled (add 'pollonly' flag to 'ups.conf' to get rid of this message) Using subdriver: APC HID 0.95 libusb_get_report: error sending control message: Invalid or incomplete multibyte or wide character When it's between increments of deviceid: root@www:/etc/nut# /lib/nut/usbhid-ups -a rack1ups Network UPS Tools - Generic HID driver 0.35 (2.6.0) USB communication driver 0.31 No matching HID UPS found My rack1ups config in ups.conf: [rack1ups] driver = usbhid-ups port = auto vendorid=051d productid=0003 desc = "Rack 1 UPS" Thanks for looking into this. I'm leaving work, so I won't be able to gather any new info for you until next week. Thanks! Zach _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
