Le 2013-12-06 15:14, Angel Tsankov a écrit :
...if main power comes back within 10 seconds after the UPS has been
shut down, the UPS will power up the PC but the latter will not start.
On Fri, 6 Dec 2013, Rene Garcia wrote:
.... You can change the parameter ups.delay.start into your UPS to set
the "Interval to wait before (re)starting the load (seconds)"
use upsset to change the value.
Hi, You could also place a declaration such as
ondelay = 60
in file ups.conf.
Regards, Roger
_______________________________________________
Nut-upsuser mailing list
[email protected]
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
