I was with you until the last - what holder are you talking about?
At 06:41 PM 03/20/2006 -0600, you wrote: >I solved the problem of not making contact with the >printed circuit. I soldered small flexible wires about >2" long from each side of the printed circuit, to each >side of the bulb holder. Just enough slack in the wire >to allow changing the bulb. Of course if you screw >the holder in backwards, it shorts out the power. > >Bruce Roe > >20 Mar 2006 [EMAIL PROTECTED] writes: >> you could BANG YOUR HAND on the dash and >> make the intermittent right-hand speedo illumination >> come back on >
