> > > > It appears that OGD1 will be PCI-X for some reason. I hope this doesn't > > > > carry over into OGC1. > > > > > > if the PCI-X is properly done, it should be compatible with standard 32 > > > bits PCI > > > > But not a PCI 64 bit slot? > > It is 64-bit, intended to run at 133MHz.
Upon further investigation, it looks like PCI-X uses the same connector as PCI 64 bit, aka PCI wide. Assuming these are compatable, then never mind. I was thinking the connectors were different. Sorry. > > Looks pretty long, are physical dimensions available? > > Well, I don't have them right off... they're standard for PCI-64, but > that probably doesn't tell you anything. I mean the maximum length of the card, not the connector. _______________________________________________ Open-graphics mailing list [email protected] http://lists.duskglow.com/mailman/listinfo/open-graphics List service provided by Duskglow Consulting, LLC (www.duskglow.com)
