> > Finally, I think it would be awesome to have a 60 or 92 or 120 pin Gumstix > > interface: > > www.gumstix.com. The 60 is probably easiest for you guys to achieve, given > > you only > > have 60 IO, but the 92 is faster and you don't need to have all the signals > > connected. > > These are really small molex connectors that you might be able to fit. The > > obvious > > advantage of this is that it would be the _only_ 3D accelerator for the > > Gumstix and also > > that it would allow the gumstix+ODG system to be operated without a > > computer in a > > custom case. >
Actually, the 92-way connector is really low-profile (2mm) and could be accommodated on the back of a PCI board (2.67mm allowed). The problem is that most of the gumstix expansion boards are designed to mechanically integrate with the tiny gumstix motherboards and the connectors on them would clash with the back of our board. Still, the 92 way connector is nice, even if we can't fully populate it with signals. _______________________________________________ Open-graphics mailing list [email protected] http://lists.duskglow.com/mailman/listinfo/open-graphics List service provided by Duskglow Consulting, LLC (www.duskglow.com)
