Hi Josh, We have never had this problem. We have 5 TLP2824 plus printers. But our labels are 1 x 1.5
Garry On Mon, Sep 11, 2017 at 3:48 PM, Josh Stompro <stomp...@exchange.larl.org> wrote: > Hello, does anyone use the Zebra TLP2824 plus printer for your > spine/pocket labels? We have two of them and they have this odd behavior > of shading the bottom 1/3 of the first label that gets printed, like the > print head is pre-heating and transferring the ribbon when it first starts. > > > > One of them has it very faintly, which we have just lived with, while the > other has it worse off. They were manufactured months apart, not from the > same batch. > > > > I just had the worse off one sent in for repair, and it was returned, and > the repair sheet says that parts were replaced, but the same problem is > there still. The testing labels that they printed out and included with it > also show the problem. > > > > I’m just wondering if this is normal for this model… and if we should be > looking at getting a different model printer? > > > > We are using 5319 wax ribbon and Zebra labels Z-Select 4000T 2.25x1.25. > > > > Thanks > > Josh > > > > Lake Agassiz Regional Library - Moorhead MN larl.org > > Josh Stompro | Office 218.233.3757 EXT-139 > > LARL IT Director | Cell 218.790.2110 > > >