We have some from Computype with a product number of 1038224. There's
really no other markings on these, other than the size.  We have also
ordered wax ribbon from Amazon.
https://www.amazon.com/gp/product/B009YBO4W6/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

We have had no problems with either.

On Tue, Sep 12, 2017 at 11:25 AM, Josh Stompro <stomp...@exchange.larl.org>
wrote:

> Hello Garry, do you use the wax ribbon or direct thermal?  Could you also
> tell me the product numbers of your supplies please.
>
>
>
> Thanks
>
>
>
> Josh Stompro - LARL IT Director
>
>
>
> *From:* Open-ils-general [mailto:open-ils-general-
> boun...@list.georgialibraries.org] *On Behalf Of *Garry Collum
> *Sent:* Tuesday, September 12, 2017 9:08 AM
> *To:* Evergreen Discussion Group
> *Subject:* Re: [OPEN-ILS-GENERAL] Zebra TLP2824 plus - output issue
>
>
>
> Hi Josh,
>
>
>
> We have never had this problem.  We have 5 TLP2824 plus printers.  But our
> labels are 1 x 1.5
>
>
>
> Garry
>
>
>
> On Mon, Sep 11, 2017 at 3:48 PM, Josh Stompro <stomp...@exchange.larl.org>
> wrote:
>
> Hello, does anyone use the Zebra TLP2824 plus printer for your
> spine/pocket labels?  We have two of them and they have this odd behavior
> of shading the bottom 1/3 of the first label that gets printed, like the
> print head is pre-heating and transferring the ribbon when it first starts.
>
>
>
> One of them has it very faintly, which we have just lived with, while the
> other has it worse off.  They were manufactured months apart, not from the
> same batch.
>
>
>
> I just had the worse off one sent in for repair, and it was returned, and
> the repair sheet says that parts were replaced, but the same problem is
> there still.  The testing labels that they printed out and included with it
> also show the problem.
>
>
>
> I’m just wondering if this is normal for this model… and if we should be
> looking at getting a different model printer?
>
>
>
> We are using 5319 wax ribbon and Zebra labels Z-Select 4000T 2.25x1.25.
>
>
>
> Thanks
>
> Josh
>
>
>
> Lake Agassiz Regional Library - Moorhead MN larl.org
>
> Josh Stompro     | Office 218.233.3757 EXT-139
>
> LARL IT Director | Cell 218.790.2110
>
>
>
>
>

Reply via email to