Excellent. :-) On Oct 3, 2017 12:46 PM, "Josh Stompro" <stomp...@exchange.larl.org> wrote:
> Hello Garry, thanks for this info. I received a sample of the 1x1.5 > labels from Computype and they worked perfectly, not shadowing on the > bottom 1/3rd of the labels anymore. So the problem was because of the > zebra brand label stock. We will be ordering more from them. > > > > Josh Stompro - LARL IT Director > > > > *From:* Open-ils-general [mailto:open-ils-general- > boun...@list.georgialibraries.org] *On Behalf Of *Garry Collum > *Sent:* Tuesday, September 12, 2017 10:44 AM > *To:* Evergreen Discussion Group > *Subject:* Re: [OPEN-ILS-GENERAL] Zebra TLP2824 plus - output issue > > > > We have some from Computype with a product number of 1038224. There's > really no other markings on these, other than the size. We have also > ordered wax ribbon from Amazon. https://www.amazon.com/gp/ > product/B009YBO4W6/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 > > > > We have had no problems with either. > > > > On Tue, Sep 12, 2017 at 11:25 AM, Josh Stompro <stomp...@exchange.larl.org> > wrote: > > Hello Garry, do you use the wax ribbon or direct thermal? Could you also > tell me the product numbers of your supplies please. > > > > Thanks > > > > Josh Stompro - LARL IT Director > > > > *From:* Open-ils-general [mailto:open-ils-general- > boun...@list.georgialibraries.org] *On Behalf Of *Garry Collum > *Sent:* Tuesday, September 12, 2017 9:08 AM > *To:* Evergreen Discussion Group > *Subject:* Re: [OPEN-ILS-GENERAL] Zebra TLP2824 plus - output issue > > > > Hi Josh, > > > > We have never had this problem. We have 5 TLP2824 plus printers. But our > labels are 1 x 1.5 > > > > Garry > > > > On Mon, Sep 11, 2017 at 3:48 PM, Josh Stompro <stomp...@exchange.larl.org> > wrote: > > Hello, does anyone use the Zebra TLP2824 plus printer for your > spine/pocket labels? We have two of them and they have this odd behavior > of shading the bottom 1/3 of the first label that gets printed, like the > print head is pre-heating and transferring the ribbon when it first starts. > > > > One of them has it very faintly, which we have just lived with, while the > other has it worse off. They were manufactured months apart, not from the > same batch. > > > > I just had the worse off one sent in for repair, and it was returned, and > the repair sheet says that parts were replaced, but the same problem is > there still. The testing labels that they printed out and included with it > also show the problem. > > > > I’m just wondering if this is normal for this model… and if we should be > looking at getting a different model printer? > > > > We are using 5319 wax ribbon and Zebra labels Z-Select 4000T 2.25x1.25. > > > > Thanks > > Josh > > > > Lake Agassiz Regional Library - Moorhead MN larl.org > > Josh Stompro | Office 218.233.3757 EXT-139 > > LARL IT Director | Cell 218.790.2110 > > > > > > >