Sethih Nang wrote: > OK. So where do I go from here? > I thought it would work for this host also since it did for the other > two using the same kernel. > What exactly did you do? Did you just run 'make' & 'make install' from the open-iscsi dir on that machine? IF you compiled it on your machine, it should have worked.
I suggest that you do the following: * Run 'make' & 'make install' from the open-iscsi dir on the problematic machine. * Start open-iscsi. If the modules are not loaded correctly, make sure that it's trying to load the same version of modules that you built. Run 'sum kernel/scsi_transport_iscsi.ko' & 'sum /lib/modules/2.6.18-rc3DH4/kernel/drivers/scsi/scsi_transport_iscsi.ko'. See if these are really the same files. Erez --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "open-iscsi" group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/open-iscsi -~----------~----~----~----~------~----~------~--~---