Hi Mike,
Mike Christie wrote:
> Rudy Gevaert wrote:
>> Hi Mike
>>
>> Mike Christie wrote:
>>
>>> What is the version of your kernel?
>>
>> 2.6.18-6-xen-amd64
>>
>
> Make sure you are using the kernel modules from the open-iscsi.org
> release, start up iscsi, then run:
I'm not sure I understand what you are saying. I'm running a stock
Debian kernel with modules provided by Debian.
So I should compile open-iscsi (the version I'm running) against the
kernel I'm running. (And thus not using the modules in the kernel by
Debian?).
> iscsiadm -m session -P 3
> iscsiadm -m node -U all -d 8
> iscsiadm -m session -P 3
>
> And send the outpout from all 3 commands. The middle one is going to
> print out a lot of stuff, but send it all.
Attached!
Thanks in advance,
Rudy
--
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
Rudy Gevaert [EMAIL PROTECTED] tel:+32 9 264 4734
Directie ICT, afd. Infrastructuur ICT Department, Infrastructure office
Groep Systemen Systems group
Universiteit Gent Ghent University
Krijgslaan 281, gebouw S9, 9000 Gent, Belgie www.UGent.be
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups
"open-iscsi" group.
To post to this group, send email to open-iscsi@googlegroups.com
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at http://groups.google.com/group/open-iscsi
-~----------~----~----~----~------~----~------~--~---
iscsiadm -m session -P 3:
iSCSI Transport Class version 1.1-646
iscsiadm version 2.0-865
Target:
iqn.1992-08.com.netapp:sn.101194508:vf.23898710-f515-11dc-a9d9-00a09806b742
Current Portal: 172.16.223.6:3260,1007
Persistent Portal: 172.16.223.6:3260,1007
**********
Interface:
**********
Iface Name: default
Iface Transport: tcp
Iface IPaddress: default
Iface HWaddress: default
Iface Netdev: default
SID: 0
iSCSI Connection State: LOGGED IN
Internal iscsid Session State: NO CHANGE
************************
Negotiated iSCSI params:
************************
HeaderDigest: None
DataDigest: None
MaxRecvDataSegmentLength: 131072
MaxXmitDataSegmentLength: 65536
FirstBurstLength: 65536
MaxBurstLength: 65536
ImmediateData: Yes
InitialR2T: No
MaxOutstandingR2T: 1
************************
Attached SCSI devices:
************************
Host Number: 1 State: running
scsi1 Channel 00 Id 0 Lun: 0
Attached scsi disk sdb State: running
scsi1 Channel 00 Id 0 Lun: 1
Attached scsi disk sdc State: running
scsi1 Channel 00 Id 0 Lun: 2
Attached scsi disk sdd State: running
iscsiadm -m node -U all -d 8
iscsiadm: Could not open /sys/class/iscsi_host/host1/initiatorname.
iscsiadm: Could not read initiatorname for host 1. Error 2
iscsiadm: Could not open /sys/class/iscsi_host/host1/ipaddress.
iscsiadm: Could not read ipaddress for host 1. Error 2
iscsiadm: Could not open /sys/class/iscsi_host/host1/hwaddress.
iscsiadm: Could not read hwaddress for host 1. Error 2
iscsiadm: Could not open /sys/class/iscsi_host/host1/netdev.
iscsiadm: Could not read netdev for host 1. Error 2
iscsiadm: in read_transports
iscsiadm: Adding new transport iser
iscsiadm: Adding new transport tcp
iscsiadm: Could not open /sys/class/iscsi_host/host1/hwaddress.
iscsiadm: could not read hwaddress for /sys/class/iscsi_host/host1/hwaddress
iscsiadm: in read_transports
iscsiadm: Could not open /sys/class/iscsi_host/host1/ipaddress.
iscsiadm: could not read local address for /sys/class/iscsi_host/host1/ipaddress
iscsiadm: Could not open /sys/class/iscsi_host/host1/netdev.
iscsiadm: could not read netdev for /sys/class/iscsi_host/host1/netdev
iscsiadm: found targetname
iqn.1992-08.com.netapp:sn.101194508:vf.23898710-f515-11dc-a9d9-00a09806b742
address 172.16.223.6 pers address 172.16.223.6 port 3260 pers port 3260 driver
tcp iface ipaddress default netdev default hwaddress default
iscsiadm: rec read looking for config file
/etc/iscsi/nodes/iqn.1992-08.com.netapp:sn.101194508:vf.23898710-f515-11dc-a9d9-00a09806b742/172.16.223.6,3260.
iscsiadm: rec read looking for config file
/etc/iscsi/nodes/iqn.1992-08.com.netapp:sn.101194508:vf.23898710-f515-11dc-a9d9-00a09806b742/172.16.223.6,3260,1007/@B.
iscsiadm: Could not stat
/etc/iscsi/nodes/iqn.1992-08.com.netapp:sn.101194508:vf.23898710-f515-11dc-a9d9-00a09806b742/172.16.223.6,3260,1007/@B
err 2.
iscsiadm: could not read data for
[iqn.1992-08.com.netapp:sn.101194508:vf.23898710-f515-11dc-a9d9-00a09806b742,172.16.223.6.3260]
iscsiadm -m session -P 3:
iSCSI Transport Class version 1.1-646
iscsiadm version 2.0-865
Target:
iqn.1992-08.com.netapp:sn.101194508:vf.23898710-f515-11dc-a9d9-00a09806b742
Current Portal: 172.16.223.6:3260,1007
Persistent Portal: 172.16.223.6:3260,1007
**********
Interface:
**********
Iface Name: default
Iface Transport: tcp
Iface IPaddress: default
Iface HWaddress: default
Iface Netdev: default
SID: 0
iSCSI Connection State: LOGGED IN
Internal iscsid Session State: NO CHANGE
************************
Negotiated iSCSI params:
************************
HeaderDigest: None
DataDigest: None
MaxRecvDataSegmentLength: 131072
MaxXmitDataSegmentLength: 65536
FirstBurstLength: 65536
MaxBurstLength: 65536
ImmediateData: Yes
InitialR2T: No
MaxOutstandingR2T: 1
************************
Attached SCSI devices:
************************
Host Number: 1 State: running
scsi1 Channel 00 Id 0 Lun: 0
Attached scsi disk sdb State: running
scsi1 Channel 00 Id 0 Lun: 1
Attached scsi disk sdc State: running
scsi1 Channel 00 Id 0 Lun: 2
Attached scsi disk sdd State: running
