On 28 Jan 2009 at 11:06, PECastro wrote: > > Hi there. > > I'm mounting a standard iscsi target. > I've been doing a lot of interesting nice things, I can see the disk, > I can play with it and everything is very wonderfull ! :) Long story > short, the disk has been running fine as if it was really attached. > > The problem started when I had the need to configure a virtual IP on > lo:0 . > > My client box IP is something like 10.238.17.221 and I was trying to > configure a 10.238.17.220 IP on lo:0 with > ifconfig lo:0 10.238.17.220 netmask 255.255.255.128 broadcast > 10.238.17.255 up
Hi! I'd suggest running "netstat -rn", and I assume the kernel will route your net via "lo" now. Regards, Ulrich > > but the moment I do this I seem to lose connection to the disk whilst > iscsi is throwing errors to the log. > > Jan 28 19:00:34 vmbox kernel: connection1:0: iscsi: detected conn > error (1011) > Jan 28 19:00:34 vmbox iscsid: Kernel reported iSCSI connection 1:0 > error (1011) state (3) > Jan 28 19:00:37 vmbox iscsid: connect failed (111) > Jan 28 19:01:08 vmbox last message repeated 8 times > > Whilst trying to dd the disk I also got this > > Jan 28 19:02:34 vmbox last message repeated 6 times > Jan 28 19:02:34 vmbox kernel: session1: iscsi: session recovery timed > out after 120 secs > Jan 28 19:02:34 vmbox kernel: iscsi: cmd 0x28 is not queued (8) > Jan 28 19:02:34 vmbox kernel: sd 1:0:0:0: SCSI error: return code = > 0x00010000 > Jan 28 19:02:34 vmbox kernel: end_request: I/O error, dev sdb, sector > 0 > Jan 28 19:02:34 vmbox kernel: Buffer I/O error on device sdb, logical > block 0 > Jan 28 19:02:34 vmbox kernel: Buffer I/O error on device sdb, logical > block 1 > Jan 28 19:02:34 vmbox kernel: Buffer I/O error on device sdb, logical > block 2 > Jan 28 19:02:34 vmbox kernel: Buffer I/O error on device sdb, logical > block 3 > Jan 28 19:02:34 vmbox kernel: iscsi: cmd 0x28 is not queued (8) > Jan 28 19:02:34 vmbox kernel: sd 1:0:0:0: SCSI error: return code = > 0x00010000 > Jan 28 19:02:34 vmbox kernel: end_request: I/O error, dev sdb, sector > 0 > Jan 28 19:02:34 vmbox kernel: Buffer I/O error on device sdb, logical > block 0 > Jan 28 19:02:37 vmbox iscsid: connect failed (111) > Jan 28 19:03:11 vmbox last message repeated 9 times > > I hacked the init.d start file so that iscsid would start with the > maximum verbosity of 8. > > The version I'm currently working with is from the RPM iscsi-initiator- > utils-6.2.0.868-0.7.el5 bundled for CENTOS. > > Can any one reproduce this problem or even better can anyone explain > why is this happening and if there's a way of getting away with this?! > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "open-iscsi" group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to open-iscsi+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/open-iscsi -~----------~----~----~----~------~----~------~--~---