On 12/22/2009 01:21 AM, Xintao Zhang wrote:
Hi Erez I use iscsitarget-1.4.19 in another pc. In Windows xp I can use microsoft initiator operate the target in full feature. there is a screen print as following: ===================================== csi1 : iSCSI Initiator over TCP/IP Vendor: IET Model: VIRTUAL-DISK Rev: 0 Type: Direct-Access ANSI SCSI revision: 04 SCSI device sdb: 12000001 512-byte hdwr sectors (6144 MB) sdb: Write Protect is off sdb: Mode Sense: 77 00 00 08
I do not think that is normal with iet, but it looks like everything goes ok below.
SCSI device sdb: drive cache: write through SCSI device sdb: 12000001 512-byte hdwr sectors (6144 MB) sdb: Write Protect is off sdb: Mode Sense: 77 00 00 08 SCSI device sdb: drive cache: write through sdb: sdb1 sd 1:0:0:0: Attached scsi disk sdb
Do you see sdb in /sys/block/sdb? Do you see anything in /dev/disk/ ?
-- You received this message because you are subscribed to the Google Groups "open-iscsi" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/open-iscsi?hl=en.
