Hello, It is referring to iSCSI HBA cards like Broadcom BCM58xx/57xxx or just using a standard NIC and the Software iSCSI adapter open-iSCSI provides.
Regards, Don On Thu, Jan 9, 2020 at 11:57 AM Bobby <[email protected]> wrote: > Under section "How to setup iSCSI interfaces (iface) for binding" of > README, there is this paragraph: > > " To manage both types of initiator stacks, iscsiadm uses the interface > (iface) > structure. For each HBA port or for software iscsi for each network > device (ethX) or NIC, that you wish to bind sessions to you must create > a iface config /etc/iscsi/ifaces. " > > > > Here I am confused. Which both types of initiator stacks we mean here? > > > > Thanks ! > > -- > You received this message because you are subscribed to the Google Groups > "open-iscsi" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/open-iscsi/587116d0-ebce-45b9-b5cf-e6fbc3437b41%40googlegroups.com > <https://groups.google.com/d/msgid/open-iscsi/587116d0-ebce-45b9-b5cf-e6fbc3437b41%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "open-iscsi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/open-iscsi/CAK3e-EagWT_YBz%3DakXUsM%3DqMJX_T4%3DSowxOWCVjWQ2W_17LyAw%40mail.gmail.com.
