ah OK thanks !
On Thursday, January 9, 2020 at 7:35:07 PM UTC+1, Donald Williams wrote: > > Hello, > > It is referring to iSCSI HBA cards like Broadcom BCM58xx/57xxx or just > using a standard NIC and the Software iSCSI adapter open-iSCSI provides. > > Regards, > Don > > > > On Thu, Jan 9, 2020 at 11:57 AM Bobby <italien...@gmail.com <javascript:>> > wrote: > >> Under section "How to setup iSCSI interfaces (iface) for binding" of >> README, there is this paragraph: >> >> " To manage both types of initiator stacks, iscsiadm uses the interface >> (iface) >> structure. For each HBA port or for software iscsi for each network >> device (ethX) or NIC, that you wish to bind sessions to you must create >> a iface config /etc/iscsi/ifaces. " >> >> >> >> Here I am confused. Which both types of initiator stacks we mean here? >> >> >> >> Thanks ! >> >> -- >> You received this message because you are subscribed to the Google Groups >> "open-iscsi" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to open-...@googlegroups.com <javascript:>. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/open-iscsi/587116d0-ebce-45b9-b5cf-e6fbc3437b41%40googlegroups.com >> >> <https://groups.google.com/d/msgid/open-iscsi/587116d0-ebce-45b9-b5cf-e6fbc3437b41%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "open-iscsi" group. To unsubscribe from this group and stop receiving emails from it, send an email to open-iscsi+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/open-iscsi/566e8911-552e-4dbf-afd5-89c156929bf1%40googlegroups.com.