The startupui problem is worst in 4.1.1 (CVS june 25,)
When trying to open a net file, the UI will hnag there forevere
after poping up a dialog box "Cannot connect to server", although image
will open.
eventually have to kill all the process. Then the following error
appears in console:
DXLink Error: Connection to DX broken
Can not determine server version number!
I suspect the problem is in DXEXEC. If I replace the dxexec from DX
4.1.0, everything
works just fine.
Suhaib
I
Chris had reported problems with my 4.1.0 SGI binaries that when he
used the DX Startup Window, he could not Edit Visual Programs or run
samples from it. At the time I could not duplicate the problem. Now
that
I have 4.1.1 running, I am experiencing a a similar problem. Everything
works fine if I start the VPE from the command line (dx -edit). If I
use the startupui, and select New Visual Programs, then I get the
"Unable to connect to dxexec" message and
DXLink Error: Connection to DX broken
Can not determine server version number!
in my terminal window. After a slight delay, the VPE does come up and is
actually connected to the server.
If I select Edit Visual Program, then I get the same messages and after
about a minute a blank VPE. One time while waiting I hit the DX
Startup's Quit button and the VPE contained my program. In either case,
I
can load a program into the VPE and everything runs fine.
I have not even started looking into this yet and figured I would ask
for
suggestions first.
Does this sound similar to what you were experiencing Chris?
Jeff
----------------------------------------------------------------------
Jeff Braun Geophysics Dept.
mailto: [EMAIL PROTECTED] Montana Tech
(406) 496-4206 1300 W. Park St.
Butte, MT 59701
