Hi Jason I think the problem goes further though - the OS is recognising the card as audio card
Regards Frank On 14/08/08 3:12 AM, "Jason Litka" <[EMAIL PROTECTED]> wrote: >> From what you've described that's normal. "USB Devices" should only show > devices that are plugged in via USB, not those that provide USB > connectivity. If you've got a USB device plugged into the card that isn't > working then that's something else. > > Jason Litka | Xoxide, Inc. > Manager, IT & Software Development > P: (610) 251-1672 x200 > F: (610) 251-0263 > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Frank > Sent: Wednesday, August 13, 2008 8:42 AM > To: [email protected] > Subject: [OF-users] USB Problem > > Hi all > > I've just installed an NEC based USB card in my Openfiler box (Onboard USB > is not working....known problem with Tyan Tiger), but it's showing up in the > hardware information as follows: > > PCI Devices > - (2x) Audio device: NEC Corporation USB > - Audio device: NEC Corporation USB 2.0 > > while under USB in hardware information: > > USB Devices none > > I'm running 2.2, kernel version 2.6.17.11-1.1.smp.x86.i686.cmov (SMP) > > Anyone know how to fix this? > > regards > > Frank > > > _______________________________________________ > Openfiler-users mailing list > [email protected] > https://lists.openfiler.com/mailman/listinfo/openfiler-users > > _______________________________________________ > Openfiler-users mailing list > [email protected] > https://lists.openfiler.com/mailman/listinfo/openfiler-users _______________________________________________ Openfiler-users mailing list [email protected] https://lists.openfiler.com/mailman/listinfo/openfiler-users
