On 18 March 2013 00:09, Alan Carvalho de Assis <acas...@gmail.com> wrote: > Hi Spen, > > On 2/8/13, Spencer Oliver <s...@spen-soft.co.uk> wrote: >> On 8 Feb 2013 08:25, "Freddie Chopin" <freddie_cho...@op.pl> wrote: >>> >>> Is there anything in OpenOCD to support OpenSDA debugger (as found of >>> new Freescale dev boards - Freedom, with Cortex-M0+)? >>> >> >> No but you can load CMSIS-DAP firmware in to the freedom board. >> >> I start initial support for this, but as usual progress is slow. >> > > Are you using CMSIS-DAP firmware from mbed[1] or from keil[2] ? >
I was using the Keil one, but they should behave the same. > What do you mean by initial support? Is it working for basic debug and > flash programming? > my initial support does nothing yet, still very wip. However mike's code look to be a lot further along. > I'm willing to test my stm32vldiscover board with versaloon firmware > (it is working fine with OpenOCD) to program FRDM board directly > (SWD), but I want to test your approach first. > You could always try both. I see that some Russian site has the complete firmware for the stlink, including bootloader - recovery should not be a problem. I have not tested the binary but i do know some that have. http://forum.easyelectronics.ru/download/file.php?id=13372 Cheers Spen ------------------------------------------------------------------------------ Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_d2d_mar _______________________________________________ OpenOCD-devel mailing list OpenOCD-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openocd-devel
