Hello Laurent! :-) On Thu, Jun 9, 2011 at 6:21 AM, Laurent Gauch <[email protected]> wrote: > But before to close the handle we should still be able : > -1- to tristate signal High-Z via all the out enable signals used in the > specific layout, BUT BUT BUT ONLY if we have entered in the MPSSE mode.
The whole driver works in MPSSE mode... > (If you have a Amotnec JTAGkey-2 you may verifiy this by checking the > external yellow LED. This LED should be OFF after any quit/shutdown) > As I explained with the TRST and OMAP in previous message ... I have created simple quit() that sets all port pins high and as input (mpsse command 0x80 0x82) but that did not shut down the yellow led :-( Do you have any other ideas on what should be done on ft2232_quit() except rtck, hi-z, div5..? I can prepare a patch, or Peter will as I can see he is already working out the subject :-) Best regards :-) Tomek -- CeDeROM, SQ7MHZ, http://www.tomek.cedro.info _______________________________________________ Openocd-development mailing list [email protected] https://lists.berlios.de/mailman/listinfo/openocd-development
