On Fri, Oct 21, 2011 at 11:06 PM, Peter Stuge <pe...@stuge.se> wrote:
> So there are two differences in behavior versus 0.5:
>
> 1. \ in -f parameters get evaluated one time extra by Jim tcl
> 2. paths in -f parameters are now relative to a different directory,
> one level down from previously
>
> 2. is most likely caused by another commit.
Yes you are right. I moved openocd.exe out of bin directory to
make it in the same directory of the scripts files (board, interface, etc)
and 2 will go away.
C:\work\openocd\binary>openocd -f board/ek-lm3s1968.cfg
Open On-Chip Debugger 0.6.0-dev-snapshot (2011-10-21-21:26)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.sourceforge.net/doc/doxygen/bugs.html
Info : only one transport option; autoselect 'jtag'
500 kHz
...
The other command used to work for version 0.5.0 still does not work.
C:\work\openocd\binary>openocd -f board\ek-lm3s1968.cfg
Open On-Chip Debugger 0.6.0-dev-snapshot (2011-10-21-21:26)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.sourceforge.net/doc/doxygen/bugs.html
Runtime Error: embedded:startup.tcl:58: couldn't read file
"boardek-lm3s1968.cfg": No such file or directory
in procedure 'script'
at file "embedded:startup.tcl", line 58
--
Xiaofan
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
