I will try to explain again my problem. 1. vmlinux.bin loaded into ram (bin2vmem) 2. Processor is reading from addresses 0x100-0x118, high addresses like 0x17E000, C00FE948, 0x42088, C01401A8, which according to Your replies is probably correct. 2. I see nothing on uart console. Processor doesn't write to uart16550_0, its address 0x9000000 does not appear on wishbone bus.
Maybe there is something wrong in dts, or bootargs? Do i have to edit initramfs.devnodes and add nod to /dev/ttyS0? I enclose .config <http://openrisc.2316802.n4.nabble.com/file/n4642100/.config> - from kernel building simple.dts <http://openrisc.2316802.n4.nabble.com/file/n4642100/simple.dts> - used device tree sim.log <http://openrisc.2316802.n4.nabble.com/file/n4642100/sim.log> - log from simulation using or32-elf-sim /jurand -- View this message in context: http://openrisc.2316802.n4.nabble.com/OpenRISC-booting-Linux-on-openrisc-in-RTL-simulator-iTLB-miss-tp4642095p4642100.html Sent from the OpenRISC mailing list archive at Nabble.com. _______________________________________________ OpenRISC mailing list [email protected] http://lists.openrisc.net/listinfo/openrisc
