- Nicholas Kesick Now at [email protected]!
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Marck Sent: Tuesday, August 10, 2010 5:18 PM To: [email protected] Subject: Re: [Opensim-users] Hypergrid 0.7.0.1+ Kesick, Nicholas Charles wrote: > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Marck > Sent: Tuesday, August 10, 2010 2:42 AM > To: [email protected] > Subject: Re: [Opensim-users] Hypergrid 0.7.0.1+ > > Kesick, Nicholas Charles wrote: >> >> >> Hello all, >> >> I waited until the ROBUST conversion was completed before wanting to try >> setting up my own hypergrid. >> >> Unfortunately the Wiki hasn't been updated yet for 0.7 >> (http://opensimulator.org/wiki/ROBUST). Would anyone be able to >> contribute (either on the wiki or by email) a basic guide for a fresh >> install to running a hypergrid? >> >> I have ROBUST running, but I can't figure out what to do next. I try to >> start OpenSim (mono OpenSim.exe) and it fails when initializing the >> friends module. I did make sure to copy the GridCommon.ini, and make the >> appropriate changes in OpenSim.ini (under Architecture, added ; before >> Standalone, removed from StandaloneHypergrid)... but the directions aren't >> clear on the steps to get a grid running. >> >> Thanks in advance, >> >> - Nicholas Kesick >> >> Now at [email protected]<mailto:[email protected]>! >> > > Hello Nicholas, > > To enable hypergrid with Robust, you'll need to use Robust.HG.ini: > mono Robust.exe -inifile=Robust.HG.ini > > For the simulators that you want to run with Robust, use an OpenSim.ini which > includes GridHypergrid.ini in section [Architecture], not > StandaloneHypergrid.ini. > > Also, > http://opensimulator.org/wiki/ROBUST#An_Example_Conversion_From_URM_To_R has > some interesting tidbits on hypergrid with Robust and how Robust 0.7 > generally works. I guess you already have read > http://opensimulator.org/wiki/0.7_Release > _______________________________________________ > Opensim-users mailing list > [email protected] > https://lists.berlios.de/mailman/listinfo/opensim-users > > I did read them earlier, and reviewed them while making another attempt. > I've gotten closer (after 3 takes today)... ROBUST now shows when my region > starts up ( :D ). ROBUST says the region was successfully registered, and > OpenSim says that logins are enabled. Unfortunately, I can't log in. Hippo > viewer immediately (and I mean immediately) says "Login Failed", but no > reason why. Neither ROBUST nor OpenSim show even an attempted login. I've > checked username and password (even created a second account), and checked > the address and gridname. > > - Nicholas Kesick In the viewer, are you using as LoginURI the same address that you have set for parameter ExternalName in section [GatekeeperService] in Robust.HG.ini? _______________________________________________ Opensim-users mailing list [email protected] https://lists.berlios.de/mailman/listinfo/opensim-users Ok that got me a little closer :D. Login starts, and then fails with the error (from ROBUST): Unable to login user nick kesick to grid 127.0.0.1:8002, reason: Unable to verify identity Hippo says: Login Failed. Error connecting to grid. Unable to authorize your session into the region. Getting there... getting there... _______________________________________________ Opensim-users mailing list [email protected] https://lists.berlios.de/mailman/listinfo/opensim-users
