I've gone though and set these up, using the external IP address for everything, and when OpenSim opens up, it asks for an estate name, which I give it, then I get:
07:26:41 - [FORMS]: exception occured on sending request to http://222.155.61.228:8003/presence: System.Net.WebException: Error: ConnectFailure (Connection refused) ---> System.Net.Sockets.SocketException: Connection refused Then it asks for a username, and I get: 07:28:30 - [FORMS]: exception occured on sending request to http://222.155.61.228:8003/accounts: System.Net.WebException: Error: ConnectFailure (Connection refused) ---> System.Net.Sockets.SocketException: Connection refused Robust is running and I can get to the hippo page on those addresses From: [email protected] [mailto:[email protected]] On Behalf Of Gary Banham Sent: Wednesday, 24 August 2011 11:09 a.m. To: [email protected] Subject: Re: [Opensim-users] Awaiting region handshake i just tried a part of the file and its still a no go i just have to walk you through the opensim ini config Gary From: [email protected] [mailto:[email protected]] On Behalf Of Guardian Sent: Tuesday, August 23, 2011 4:50 PM To: [email protected] Subject: Re: [Opensim-users] Awaiting region handshake Just got robust.ini too On Aug 24, 2011 10:37 AM, "Gary Banham" <[email protected]> wrote: > let me know which parts you got guardian > > > > From: [email protected] > [mailto:[email protected]] On Behalf Of Guardian > Sent: Tuesday, August 23, 2011 4:00 PM > To: [email protected] > Subject: Re: [Opensim-users] Awaiting region handshake > > > > Thanks Gary, I'll await your config. > > On Aug 23, 2011 11:54 PM, "Gary Banham" <[email protected]> wrote: >> ok I just had my desktop crash so it lost the email I was writing >> >> I have to get to work when I get home I will send you a copy of my grid >> common ini file and the robust to use as example >> >> stick with the wan address for now and ill help you configure what you > want >> with Opensim >> >> then you can figure out dydns when you know Opensim is working properly >> >> >> >> TC >> >> Gary >> >> >> >> From: [email protected] >> [mailto:[email protected]] On Behalf Of Guardian >> Sent: Monday, August 22, 2011 9:26 PM >> To: [email protected] >> Subject: Re: [Opensim-users] Awaiting region handshake >> >> >> >> OK, I did a fresh install, just simple stand alone works fine. >> >> I used my WAN address for the region externalip. >> >> If I change the externalip to my dyndns address it no longer works. >> >> On Aug 23, 2011 2:55 PM, "Guardian" <[email protected]> wrote: >>> I'll delete my old install and start from scratch, then get back to you. >> So >>> basically you want me to start with a stand alone install? >>> On Aug 23, 2011 2:29 PM, "Gary Banham" <[email protected]> wrote: >>>> Ok lets start with scratch go >>>> >>>> download the opensim version 7.1.1 not diva just the straight version >>>> >>>> run the 32bit opensim start and follow the instructons >>>> >>>> you should be able to connect to opensim as localhost:9000 >>>> >>>> in your consol >>>> >>>> follow the set up instructions as to region and estate ect >>>> >>>> make sure that worked >>>> >>>> after that I'll help you set it up as you like >>>> >>>> >>>> >>>> >>>> >>>> TC >>>> >>>> Gary >>>> >>>> >>>> >>>> >>>> >>>> From: [email protected] >>>> [mailto:[email protected]] On Behalf Of Guardian >>>> Sent: Monday, August 22, 2011 8:08 PM >>>> To: [email protected] >>>> Subject: Re: [Opensim-users] Awaiting region handshake >>>> >>>> >>>> >>>> Any Ideas guys? >>>> >>>> On Mon, Aug 22, 2011 at 1:11 PM, Guardian <[email protected]> > wrote: >>>> >>>> ok, so I've put the server in my router's DMZ, and I can HTTP to all the >>>> ports I need (8002 and 9000) and get the hippo page. >>>> >>>> >>>> >>>> I've put the modem's external IP address in regions under external ip, >> and >>>> the internal ip in the grid-common.ini >>>> >>>> >>>> >>>> now I get thos error in the robust console when trying to connect: >>>> >>>> >>>> >>>> 13:08:08 - [WEB UTIL]: <0> osd request for >>>> http://222.155.61.228:9000/agent/142d8e3f-c5ce-4e88-8a5f-8866da75223f/, >>>> method POST FAILED: Error: ConnectFailure (Connection refused) >>>> >>>> >>>> >>>> >>>> >>>> On Mon, Aug 22, 2011 at 12:24 PM, Gary Banham <[email protected]> wrote: >>>> >>>> you know what thats my thinking you and maby us are overcomplicating the >>>> whole thing >>>> >>>> >>>> >>>> >>>> >>>> From: [email protected] >>>> [mailto:[email protected]] On Behalf Of Gary Beck >>>> Sent: Sunday, August 21, 2011 6:14 PM >>>> >>>> >>>> To: [email protected] >>>> >>>> Subject: Re: [Opensim-users] Awaiting region handshake >>>> >>>> >>>> >>>> If you don't require LAN access then NAT Loopback isn't needed. >>>> >>>> ----- Original Message ----- >>>> >>>> From: Guardian <mailto:[email protected]> >>>> >>>> To: [email protected] >>>> >>>> Sent: Sunday, August 21, 2011 7:43 PM >>>> >>>> Subject: Re: [Opensim-users] Awaiting region handshake >>>> >>>> >>>> >>>> Hi again all, >>>> >>>> >>>> >>>> I'm really struggling to find a router in NZ that supports NAT >> Loopback... >>> I >>>> spent over an hour with Linksys and they pretty much said none of their >>>> routers support it apart from the E2000 which can't be connected to any >> NZ >>>> ISP's... >>>> >>>> >>>> >>>> I was just looking at the opensim wiki again, and notice it now says: >>>> >>>> >>>> >>>> "This is an issue since each region has to be specify an IP address for >>> the >>>> client to connect. This is the ExternalHostName parameter in a regions >>>> config file (e.g. bin/Regions/Regions.ini). In the absence of NAT >>> loopback, >>>> if a forward facing IP address is specified (such as 199.149.252.44) > then >>>> external clients will be able to connect to the region but clients on >> your >>>> local network will not. If the internal address were put in >>> ExternalHostName >>>> instead (e.g. 192.168.2.40) then viewers on the local network will be >> able >>>> to connect but viewers from an external network would not." >>>> >>>> >>>> >>>> My Issue was I couldnt connect to the sim from outside even when the >>>> external IP address was specified in regions. >>>> >>>> >>>> >>>> I don't need to connect to the sim from the LAN, only the WAN so is NAT >>>> loopback still an issue? >>>> >>>> >>>> >>>> _______________________________________________ >>>> Opensim-users mailing list >>>> [email protected] >>>> https://lists.berlios.de/mailman/listinfo/opensim-users >>>> >>>> >>>> >>>> >>>> >> >
_______________________________________________ Opensim-users mailing list [email protected] https://lists.berlios.de/mailman/listinfo/opensim-users
